I purchased a PiKVM kit in 2021, and got it operational at that time. I did not need to use it until recently, 2024-09. Basically a special 'hat' is mounted on a standard Raspberry Pi 4, the smallest memory unit type being sufficient (2 GB). The kit was complete with all the required parts, such as the hat, Raspberry PI, a case, small OLED display and various cables.

After about 3 years of being shelved the OS would not update. It was easier to simply re-image with the latest version of the software. I followed the Flashing PiKVM OS image instructions, using the Linux CLI image flash option.

The PiKVM builtin display shows the KVM IP address, but I just used Linux commands to find from my LAN, e.g. sudo nmap -sn 192.168.1.1/24. Once I go satisfactorily operation I followed the instructions to change the passwords on the PiKVM and placed the related information into my password manager.

My router computers built in BMC/IMPI had failed and was difficult to use, particularly any time it was reset. Hence I disabled the BMC VGA system and used the main CPU builtin GPU to the PiKVM with a USB C to USB A cable for the keyboard and mouse access. I used a jumper on the motherboard to disable the BMC VGA to ensure it would not interfere with operation. Basically I was no longer using the built in KVM.

• PiKVM OS (and the underlying Arch Linux ARM upstream) often receives software updates. After installation, it makes sense to update the OS.
• The question of how often to update needs to primarily consider access to the OS and software latest features and latest security updates. Arch Linux is a rolling release frequently updated and sometimes has difficulties successfully updating from older versions. In these cases it maybe easier to simply re-flash the latest pikvm os on to the memory card.
• Arguably if the pi-kvm is working it does not need to be updated
• Security should not be an significant issue unless directly accessible from internet. Although I can not think of any reason why direct internet access should ever be required. It should always be possibly to access via a secured VPN if internet access is required.

1. Login into the shell as root
2. pikvm-update will run the update command
   1. This script does the full update including placing the os into rw mode before update and ro mode upon completion.
   2. The commands will inform if a reboot is necessary. If reboot required, reboot command will reboot in root.
   3. If message pikvm-update: command not found received then perform following
      1. rw command to place into read/write mode
      2. pacman -Syy command to update arch repository database
      3. pacman -S pikvm-os-updater to install the pikvm-update package
      4. pikvm-update should then run the update command
   4. if the pikvm-update command still fails to function correctly it maybe necessary to re-flash the operating system on to the memory card, use the latest available version online.

I assigned the PiKVM a specific IP address in the LAN Kea DHCP server and a local name in the LAN Bind9 DNS server and then performed internal secure routing on the LAN using Traefik. The PiKVM software defaults to using a self signed certificate (Snake oil) for HTTPS. I wanted to use simple http behind a local router that would terminate the host https on a reverse proxy to a http. The instructions are to edit /etc/kvmd/override.yaml on the PiKVM adding the following:

nginx:
    https:
        enabled: false

This function as anticipated.

See KVMD 3.301: Generated Nginx configs

• PiKVM
  • PiKVM V3 HAT
  • Getting access to PiKVM
  • Flashing PiKVM OS image
  • update pikvm os