smb.conf <code># # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Some options that are often worth tuning have been included as # commented-out examples in this file. # - When such options are commented with “;”, the proposed setting # differs from the default Samba behaviour # - When commented with “#”, the proposed setting is the default # behaviour of Samba but the option is considered important # enough to be mentioned here # # NOTE: Whenever you modify this file you should run the command # “testparm” to check that you have not made any basic syntactic # errors.

#

Global Settings

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

 workgroup = WORKGROUP

# server string is the equivalent of the NT Description field

server string = %h server (Samba, Debian)
 netbios name = kpts

# Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

 dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = yes

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine # that connects

 log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).

 max log size = 1000

# If you want Samba to only log through syslog then set the following # parameter to 'yes'. # syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher.

 syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace

 panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible # values are “standalone server”, “member server”, “classic primary # domain controller”, “classic backup domain controller”, “active # directory domain controller”. # # Most people will want “standalone sever” or “member server”. # Running as “active directory domain controller” will require first # running “samba-tool domain provision” to wipe databases and create a # new domain.

 server role = standalone server

# If you are using encrypted passwords, Samba will need to know what # password database type you are using.

 passdb backend = tdbsam

 obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed.

 unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan «kahan@informatik.tu-muenchen.de> for # sending the correct chat script for the passwd program in Debian Sarge).

 passwd program = /usr/bin/passwd %u
 passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'.

 pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped # to anonymous connections

 map to guest = bad user

########## Domains ###########

# # The following settings only takes effect if 'server role = primary # classic domain controller', 'server role = backup domain controller' # or 'domain logons' is set #

# It specifies the location of the user's # profile directory from the client point of view) The following # required a [profiles] share to be setup on the samba server (see # below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser –quiet –disabled-password –gecos “” %u

# This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a “machines” group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c “%u machine account” -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup –force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders # with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100

# Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones

 usershare allow guests = yes

#

Share Definitions

# Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home directory as \\server\username ;[homes] ; comment = Home Directories ; browseable = no

# By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. ; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone # with access to the samba server. # Un-comment the following parameter to make sure that only “username” # can connect to \\server\username # This might need tweaking when using external authentication schemes ; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes

# Un-comment the following and create the profiles directory to store # users profiles (see the “logon path” option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700

[printers]

 comment = All Printers
 browseable = no
 path = /var/spool/samba
 printable = yes
 guest ok = no
 read only = yes
 create mask = 0700

# Windows clients look for this share name as a source of downloadable # printer drivers [print$]

 comment = Printer Drivers
 path = /var/lib/samba/printers
 browseable = yes
 read only = yes
 guest ok = no

# Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin

[home]

writeable = yes
path = /home

[shared]

path = /home/shared
writeable = yes

[KarlData]

writeable = yes
path = /media/disk1/KarlData

[media2]

path = /media/disk1/Media
writeable = yes

[media1]

path = /media/disk2/Media
writeable = yes

[deluge]

path = /media/deluge/Downloads
      writeable = yes

<\code>