fsck - file system check

Back  
 Next

This is an old revision of the document!


Prev  
 Next

Use fsck to check and repair a file system. The file system must be unmounted when being check and repaired to prevent corruption!

Checking Root File System

The root file system can not be unmounted and checked. Two possible options to check the system are:

  • Force the Root Filesystem to use fsck during reboot, The Geek Stuff covers this well in, How to Force Check Root Filesystem using fsck During Reboot. A summary of key commands:
  • The Root file system is automatically checked at certain intervals. To check this: sudo tune2fs -l /dev/sda1 | grep -i check.
  • To force a recheck at the next reboot, create the file forcefsck. At the next reboot a fsck will be performed and the forcefsck file removed. Commands:
    • cd /
    • sudo touch forcefsck
  • Boot the system to a rescue file system. From the rescue file system the main boot drive may then be checked with fsck. (Further details not given.)

Some other file system tips:

  • To check current mounted disks use “df -h”
  • To check current disks use “sudo fdisk -l”. (This is a disk partition command. Be careful with use.)
  • To check current disks use “sudo parted -l”. (This is a disk partition command, more modern than fdisk. Be careful with use.)
  • To check directory size use “sudo du --max-depth=1 --all -h”
  • The filesystem boot file is /etc/fstab, “sudo vim /etc/fstab”. (Be careful with editing this.)

ipv6

/app/www/public/data/attic/home_server/home_server_setup/disk_check.1575771284.txt.gz · Last modified: 2023-04-30 Sun wk17 17:43
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International