Search
You can find the results of your search below.
Matching pagenames:
- apt package management
- Set Up and Ubuntu APT Cache
- Back-up Server Old Setup
- BASH Customisation
- Calibre Server
- Conky
- Linux Block Device Notes
- XFCE
- Fail2Ban
- Linux Firmware Notes
- Home Server Index
- IPMI CLI Tools
- IPMI Console Setup
- logrotate
- Manjaro Setup Notes
- Commonly used commands and scripts
- MONIT
- Mosh
- NFS
- nnn
- NUT (Network UPS Tools) Setup
- Rsync
- samba
- snapraid
- SSH Notes
- SWAP Files
- Simlinks
- systemd Stuff
- Time Date Related Setup
- tmux
- Tripwire
- VIM Editor
- Webmin
Fulltext results:
- VIM Editor
- ===== ++++~/.vimrc| <code bash>colorscheme desert set nocompatible syntax on set number relativenumber set autoindent expandtab tabstop=2 shiftwidth=2 filetype plugin on filetype indent on set cursorline set cursorcolumn set shiftwidth=2 set
- Conky
- n /usr/share/X11/rgb.txt. There isn't a standard set of colors to be found on any X Window system, so ... _times = 0,-- Number of updates before quitting. Set to zero to run forever. no_buffers = true,-- Sub... _samples = 2,-- Number of cpu samples to average. Set to 1 to disable averaging net_avg_samples = 2,-- Number of net samples to average. Set to 1 to disable averaging -- ------------------
- samba
- not look at samba much since I first attempted to set up my home sever circa 2011 on Fedora before I mo... ork. I was lazy and tended to just use Webmin to set this up. However as I did not use Webmin for much else I have elected to to set it up now that I moved my server to Debian. So n... proxy = no #### Networking #### # The specific set of interfaces / networks to bind to # This can be
- NUT (Network UPS Tools) Setup
- e the same as 7.2 AMP batteries....) I basically set and forgot them. I understand 5-6 year life is n... roject documentation]] is not simple to follow. I set this up quite some time ago, so this will not nec... ] password = {password} actions = SET instcmds = ALL </code> <code> ... lated value battery.charge.low: 25 #Set value LB (Low Battery Alarm) battery.charge.resta
- Rsync
- s being run as root! This all requires the proper set-up of ssh with password-less access, discussed ea... \ -q user@host /usr/bin/hostname -s</code> To set this configuration system-wide, place these entri... on files (i.e. /etc/ssh/ssh_config -** This files set the default configuration for all users of OpenSS... # All rsync commands have at least these options set. rsync_short_args -aev rsync_long_args --delet
- Back-up Server Old Setup
- too long. Other problems include; difficulties in set-up, and concerns will reliability. Recently I not... verlay file system. The information available to set up was some of the worst I have found to date for... is 3. # If you want the rsync output, you have to set it to 4 # loglevel 3 # If you enable this... s. All rsync commands have at least these options set. # rsync_short_args -av rsync_long_args --
- IPMI CLI Tools
- nd flash the identification light. *Ability to set up a console on a serial port and have the BMC re... mkp chassis power'' * Turn power on | off | reset | soft: ''ipmitool -I lanplus -H 192.168.1.40 -U ... chassis power on'' * Turn power on | off | reset | soft: ''ipmitool -I lanplus -H 192.168.1.40 -U ... power soft'' * chassis power options [off, reset, cycle] will all hard stop the main computer, whi
- BASH Customisation
- current settings. Looks like built ins only? * set [[https://www.gnu.org/software/bash/manual/html_node/The-Set-Builtin.html|The Set Builtin]] set options, ''set'' on its own list entire content. (Looks like user defined?) ====bash-it
- Manjaro Setup Notes
- njaro]] has been relatively so simple and easy to set up there are not really a lot of notes at this ti... 0 # Number of updates before quitting. Set to zero to run forever. no_buffers yes ... s 2 # Number of cpu samples to average. Set to 1 to disable averaging net_avg_samples 2 # Number of net samples to average. Set to 1 to disable averaging # -------------------
- Set Up and Ubuntu APT Cache
- t-cacher-ng apt update apt upgrade apt-get}} =====Set Up and Ubuntu APT Cache===== The apt-cacher-ng l... e LinuxHelp web page, [[https://www.linuxhelp.com/set-apt-cache-server-using-apt-cacher-ng/|How To Set up an Apt-Cache Server using "Apt-Cacher-NG" in Ubunt... tart". If the non-default Cache directory is not set up correctly the program defaults to "/var/cache/
- IPMI Console Setup
- usually store in file ''sudo vim /etc/ipmi'' and set to root only read/write ''sudo chown root:root /e... info''. This gives the following output: <file> Set in progress : set-complete Enabled : true Force Encryption ... * The command ''stty'' can be used to manually set the terminal size, e.g. ''stty cols 132 rows 34''
- systemd Stuff
- [[https://unix.stackexchange.com/questions/246935/set-systemd-service-to-execute-after-fstab-mount|Set systemd service to execute after fstab mount]] * Di... only on cli\\ ''timedatectl list-timezones'' to set available time zones\\ ''sudo timedatectl set-timezone australia/perth'' to set timezone\\ Some lin
- SSH Notes
- /ssh/sshd_config'' ensure the following option is set ''Banner /etc/issue.net'' (you can actually used ... implified.guide/ssh/suppress-banner]] *[[HowTo: Set a Warning Message (Banner) in SSH|https://www.she
- Time Date Related Setup
- and date information as required, mainly used to set local timezone and daylight savings parameters. T... time zones in timedatectl. *''sudo timedatectl set-timezone Australia/Perth'' to change timezone to
- Fail2Ban
- *<code postfix> [postfix] # To use another modes set filter parameter "mode" in jail.local: enable =