Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Rsync @home_server:home_server_setup:other_services
- rets'' <file>username:userpassword</file> ''sudo systemctl status rsync.service'' [status, start, stop,... ed to Microsoft Windows, Mac, and other operating systems.) The first time, rsync sends all the data over ... Rsync should already be installed on most Linux system. You can install it, and the [[http://www.opbyte.... d and re-run it for real. ====Test rsync on Local System==== In an effort to try out rsync in the raw, I'
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- UT about this time, including early conversion to systemd scripts. I notice the Techno Tim [[https://docs... is an open source network monitoring and control system. I use a Powershield Commander RT PSCRT1100 a 110... 5 #Fix value </code> =====NUT & Systemd===== I have been using NUT on my server and UPS... .04 has been correctly configured to operate with systemd. After updating the configuration file restart
- systemd Stuff @home_server:home_server_setup:other_services
- {{tag>systemd systemctl timer timers journalctl linux debian setup customise customisation}} ======systemd Stuff====== * [[https://linuxconfig.org/how-to-create-systemd-service-unit-in-linux|How to create systemd serv
- Conky @home_server:home_server_setup:other_services
- tup monitor}} ======Conky====== Conky is a Linux system monitor tool using X Windows. Conky is highly configurable and is able to monitor many system variables including the status of the CPU, memory... es, processes, network interfaces, battery power, system messages, e-mail in-boxes Linux updates, runs many popular music players, and much more. Unlike system monitors that use high-level widget tool-kits to
- IPMI CLI Tools @home_server:home_server_setup:other_services
- does not need to be powered on, or the operating system operational for the BMC to work, it just needs a ... I provides. Some downside of IPMI: *In general systems fitted with IPMI are substantially more expensiv... r data records and event messages. Access through system interfaces like memory mapped IO, I2C bus etc. ... though it were local in cases where the operating system locks up and SSH or (heaven forbid) telnet access
- BASH Customisation @home_server:home_server_setup:other_services
- docker volume prune' alias dprunesys='sudo docker system prune -a' alias ddelimages='sudo docker rmi $(doc... ge}}" | (sed -u 1q; sort)' alias ddf='sudo docker system df' alias dlogs='sudo docker logs -tf --tail="50"... cers='cscli bouncers list' alias csfbstatus='sudo systemctl status crowdsec-firewall-bouncer.service' alias csfbstart='sudo systemctl start crowdsec-firewall-bouncer.service' alias
- Manjaro Setup Notes @home_server:home_server_setup:other_services
- se of snap packages as this is a propriety Ubuntu system.) * There are also also built in packages fo... e'' will update flatpak packages. * The CUPS systemd unit file is: cups.service and cups.socket The ... ever. no_buffers yes # Subtract file system buffers from used memory? cpu_avg_samples 2 ... e used # -------------------- Conky's Displayed System Monitoring Parameters -------------------- # TEXT
- fsck - file system check
- partition boot corrupt parted}} =====fsck - file system check===== Use fsck to check and repair a file system. **The file system must be unmounted when being check and repaired to prevent corruption! ** ====Checking Root File System==== The root file system can not be unmounted an
- Network Setup
- p below. The newer home server has 5 drive, 2 SSD system drive, 2 larger data storage drives and 1 drive u... ork Setup section below, describes setting up the system with bonded and bridge NICs. All these described ... escribes the network interfaces available on your system # and how to activate them. For more information,... escribes the network interfaces available on your system # and how to activate them. For more information,
- IPMI Console Setup @home_server:home_server_setup:other_services
- s unfortunately a bit old as it does not give any systemd setup information. I adjusted my grub boot load... e serial terminal is running. Current Ubuntu uses systemd, a reference to setup ttys on systemd is Pid Eins [[http://0pointer.net/blog/projects/serial-console.html|systemd for Administrators, Part XVI]] which discusses G
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- {{tag>linux debian backup LVM filesystem server NFS mount showmount}} ======Back-up Server Old Setup======... , it does not seem to allow for a true merge file system, just overlay file system. The information available to set up was some of the worst I have found to dat... 019/|The Perfect Media Server - 2019 Edition]] *Systemd startup [[https://dominicm.com/mergerfs-union-fi
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- {{tag>linux dmesg command systemd journal journalctl tzdata timezone apt upgrade update install remove crontab man apropos tldr ip tc systemctl journalctl}} ======Commonly used commands and ... the OS boot messages between grub and os up. =====systemd===== *Systemctl related commands: *Systemd common commands (start / stop / restart / status) (ena
- KVM Setup
- KVM Hypervisor: ''sudo apt install qemu-kvm qemu-system qemu-utils libvirt-clients libvirt-daemon-system virtinst bridge-utils'' bridge-utils is optional. *''... libosinfo-bin'' is a library with guest operating systems information to assist VM creation Use the built... o virt-clone %%--%%connect=qemu:%%//%%example.com/system -o this-vm -n that-vm %%--%%auto-clone''. To lis
- SSH Notes @home_server:home_server_setup:other_services
- (you can actually used any path/file) *''sudo systemctl reload sshd'' needs to be performed after any ... e that I like and some that I do not like. This system status information script, ++++/etc/update-motd.d... hold" | bc) -eq 1 ]; then echo echo -n " System information as of " /bin/date echo /u... sr/bin/landscape-sysinfo else echo echo " System information disabled due to load higher than $thr
- Calibre Server @home_server:home_server_setup:other_services
- e. I had the server running on my Ubuntu 14.04 system about 5 years ago. From memory the Calibre web i... ip:8080'' in a browser on my LAN. Next setup the systemd service as follows sudo vim ''sudo vim /etc/systemd/system/calibre-server.service'' : <code>## startup service [Unit] Description=calibre content server Aft