Search
You can find the results of your search below.
Fulltext results:
- Router Miscellaneous
- s://github.com/nicolargo/glances After=network.target [Service] #ExecStart=/usr/local/bin/glances -w -... estart=on-abort [Install] WantedBy=multi-user.target </code> After modifying a systemd file update sy... on/linux/docker-ce/ubuntu/#uninstall-old-versions|Get Docker CE for Ubuntu]]. __**This is pretty old, ... in Algo IPSEC VPN anymore and have been trying to get Wireguard working recently.**// Comparison of [[
- Router Hardware
- machines, e.g. with multiple gigabit NICs, start getting more pricey too. I suppose you get what you pay for.... *The Raspberry Pi 4 & 5 looks like a muc... can be had at even lower prices. *I decided to get a Supermicro [[https://www.supermicro.com/product... eat performance for some years to come. Again you get what you paid for..... So some 7 years later I am
- Debian / Ubuntu Network Setup
- cription=Remove route to he-ipv6 Wants=network.target After=network-online.target [Service] Type=oneshot ExecStart=:/bin/bash -c "ip r del 2001:470:1f2c:10... 64 dev he-ipv6" [Install] WantedBy=multi.user.target default.target </code> ++++ *The final command is used to enable the command to run at start-up: ''
- Linux Router Background
- ter about a month of reliable operation I started getting problems with the PPPoE daemon again. The log... ent environment....) *Lastly, was my ability to get time and motivation to perform the configuration ... (2022). In early 2024 I requested an upgrade to get fibre in to my house for primary internet access ... y. My static IPv4 address took another 4 weeks to get working correctly, basically because of the ISP.
- DHCP / DNS Setup
- est bind9 root file to /etc/bind/db.root: ''sudo wget --user=ftp --password=ftp ftp://ftp.rs.internic.n... IPv6 Documentation=man:radvd(8) After=network.target ConditionPathExists=/etc/radvd.conf [Service] Ty... wPrivileges=yes [Install] WantedBy=multi-user.target </code>++ =====DNS Check Commands===== ====loc
- ISP IPoE DHCP Setup Notes
- %I Documentation=man:dhclient(8) Wants=network.target Before=network.target BindsTo=sys-subsystem-net-devices-%i.device After=sys-subsystem-net-devices-%i.d... /dhclient -r %I [Install] WantedBy=multi-user.target </code> To reload the service files after any ch
- Router VM
- al Area Network) DNS/DHCP), these services work together * Main local DNS server using ISC Bind9 ... P server using ISC DHCP My preference would be to get a container system functioning directly on the ba... ient-gtk-3.0-5'' - libspice-gtk3 provides gtk3 widget to show spice display and accept user input. (Cl
- NFTables Configuration
- the following file called: "router.nft". Dont forget to ensure the router is allowed to forward packet... accept ====Hairpin NAT==== After setting up and getting my router to function I found that I could no
- TC - Traffic Control
- ending them faster and faster until packets start getting rejected - it is therefore possible to contro... pping packets that arrive at a router before they get forwarded. There are more relevant details, but t
- IPTables Configuration
- SHED -j ACCEPT # enable traceroute rejections to get sent out -A INPUT -p udp -m udp --dport 33434:335
- NFTables IP Control
- et firewall controllist </code> ++++ *Do not forget to run ''sudo chmod 774 controllist.sh'' on the s
- Router Basic Debian Server Setup
- It seems now Ubuntu also requires you to login to get the latest updates...... No thank-you! ---- ===