You can find the results of your search below.

Web Server setup @home_server
14 Hits, Last modified:
sure the statement "syntax ok" in output *To enable the new website configuration: ''sudo a2ensite kp... ple.com.conf'' *Reload or restart apache2 to enable configuration changes: ''sudo systemctl reload ap... es in apache, particularly not checking which are enable or disabled. - Edit configuration files in ''l... /etc/apache2/apache2.conf'' - Always check the enable apache configuration files: ''la -ls /etc/apache2
Back-up Server Old Setup @home_server:home_server_setup:other_services
7 Hits, Last modified:
[status, start, stop, restart, reload, disable, enable] I have enabled so the rsync deamon this normall... d_rsync /usr/bin/rsync # Uncomment this to enable remote ssh backups over rsync. # #cmd_ssh ... have to set it to 4 # loglevel 3 # If you enable this, data will be written to the file you specif... usly (and messing up the snapshot_root). # If you enable this, make sure the lockfile directory is not wor
Router Miscellaneous @linux_router
6 Hits, Last modified:
available. There seem to be 2 main services to enable/disable/start/stop, nprobe and ntopng: * ''sudo... 'sudo systemctl disable ntopng'' | to disable (or enable) starting on computer startup * ''sudo systemct... 'sudo systemctl disable nprobe'' | to disable (or enable) starting on computer startup We can also turn-o... ''sudo systemctl disable redis'' | to disable (or enable) starting on computer startup ---- ======Docker
KPTree - Email Server Setup @home_server
6 Hits, Last modified:
ged as directed, as on systemd use sudo systemctl enable spamassassin.service instead. CRON=0 changed to C... systemctl reload apache2'' to restart apache2 and enable any configuration changes, could also use ''resta... enied </RequireAll> </Directory> </code> To enable site configuration: ''sudo a2ensite roundcube.con... rdware configuration ''ip a'' *To start (/stop /enable) the deluge daemon ''sudo systemctl start deluge'
KPTree Torrent VM Setup @home_server
5 Hits, Last modified:
other standard systemctl operators: stop, status, enable, disable, etc. Similarly to get a better look at... ice -b 0'' *Other systemctl directives: *''enable'' : to start the systemctl service at boot *... deluge) ''ps -A | grep open'' *To start (/stop /enable) the deluge daemon ''sudo systemctl start deluged'' *To start (/stop /enable) the deluge web interface daemon ''sudo systemctl
samba @home_server:home_server_setup:other_services
5 Hits, Last modified:
ile: ''sudo vim /etc/samba/smb.conf'' * Add and enable users: ''sudo smbpasswd -a USER'', ''​sudo smbpas... NS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no # WINS Ser... n above to use this. # It is recommended that you enable this feature if your Samba machine is # not prote... e shell = /bin/bash # Setup usershare options to enable non-root users to share folders # with the net us
Debian / Ubuntu Network Setup @linux_router
4 Hits, Last modified:
get </code> ++++ *The final command is used to enable the command to run at start-up: ''sudo systemctl enable ipv6_start.service''. *This also needs to be pe... ion. ++++ ''vim torouter.sh'' | <code> systemctl enable bind9 systemctl enable isc-dhcp-server mv /etc/netplan/50-cloud-init.yaml /etc/netplan/50-cloud-init.yaml
NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
3 Hits, Last modified:
: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately lo... ommon commands (start / stop / restart / status) (enable / disable for boot control) *List current Sy
IPMI Console Setup @home_server:home_server_setup:other_services
2 Hits, Last modified:
sole=tty1 console=ttyS1,115200n8" # Uncomment to enable BadRAM filtering, modify to suit your needs # Thi... systemd...) The key command is ''sudo systemctl enable serial-getty@ttyS1.service''. This will start th
Rsync @home_server:home_server_setup:other_services
2 Hits, Last modified:
ion ''-a''. Additional options used are ''-z'' to enable compression, and ''-v'' to provide verbose status... [status, start, stop, restart, reload, disable, enable] ===Compression option -z can slow down file tr
ISP PPPoE Network Setup @linux_router
2 Hits, Last modified:
ervice from activating at system startup. We will enable later, once configuration is more complete. To c... I managed to use so.</fs> =====System Forwarding Enable===== To allow the router to forward packet the L
Calibre Server @home_server:home_server_setup:other_services
2 Hits, Last modified:
mnt/disk1/KarlData/Karl Data 2/Calibre_library' --enable-local-write [Install] WantedBy=multi-user.target... service can be used, e.g.: * ''sudo systemctl enable calibre-server'' * ''sudo systemctl start cali
dokuwiki setup notes
1 Hits, Last modified:
ww.dokuwiki.org/plugin:typography|Typography]] | Enable typesetting capabilities with CSS font properties
Commonly used commands and scripts @home_server:home_server_setup:other_services
1 Hits, Last modified:
ommon commands (start / stop / restart / status) (enable / disable for boot control) *List current Sy
Network Setup @home_server:home_server_setup
1 Hits, Last modified:
I have been luck to avoid the whole Wifi mesh to enable adequate Wifi coverage, which is clearly inferior
Fail2Ban @home_server:home_server_setup:other_services
1 Hits, Last modified:
KVM Setup @home_server:home_server_setup
1 Hits, Last modified:
NFTables Configuration @linux_router
1 Hits, Last modified:
IPTables Configuration @linux_router
1 Hits, Last modified:
SWAP Files @home_server:home_server_setup:other_services
1 Hits, Last modified: