You can find the results of your search below.

Conky @home_server:home_server_setup:other_services
40 Hits, Last modified:
D DRIVE I/O ${hr 2}$color ${color0}Device:$color /dev/sdd3 ${color0}Reads: $color${diskio_read /dev/sdd3}/s${alignr}${color0}Writes: $color${diskio_write /dev/sdd3}/s ${color3}${diskiograph_read /dev/sdd3 30,225 33FF00 FF3333 scale -t}$color${alignr}${color3}${
KVM Setup @home_server:home_server_setup
14 Hits, Last modified:
file name to the VM image file. *Use ''ls -l /dev/nbd*'' to check if any devices named nbd have already been defined. *Use ''sudo qemu-nbd -c /dev/nbd0 <image.qcow2>'' to create the block devices on the VM. *''sudo fdisk /dev/nbd0 -l'' will list the available partitions in /dev/nbd0. *Use ''sudo partprobe /dev/nbd0'' to upda
Manjaro Setup Notes @home_server:home_server_setup:other_services
12 Hits, Last modified:
DRIVE I/O ${hr 2}$color #${color0}Device:$color /dev/nvme0n1p5 #${color0}Reads: $color${diskio_read /dev/sdd}/s${alignr}${color0}Writes: $color${diskio_write /dev/nvme0n1p5}/s #${color8}${diskiograph_read /dev/sdd 25,150 33FF00 FF3333 scale -t}$color${alignr}${colo
Back-up Server Old Setup @home_server:home_server_setup:other_services
10 Hits, Last modified:
xt4 errors=remount-ro 0 1 # swap was on /dev/sdd5 during installation UUID=e3442da3-4eaf-477d-... v devtmpfs 16G 0 16G 0% /dev tmpfs tmpfs 3.2G 2.7M 3.2G 1% /run /dev/sdd1 ext4 443G 161G 260G 39% / ... fs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0
IPMI CLI Tools @home_server:home_server_setup:other_services
10 Hits, Last modified:
U $User_Name -f $PW_file_location power status 2>/dev/null) if [ ${?} -ne 0 ] then exit 11 #error 1... IP -U $User_Name -f $PW_file_location power on &>/dev/null 2>/dev/null if [ $? -ne 0 ] then exit 12 #error 12 means that the ipmi tool power... (c=1; C<15; c++)) do ping -c1 -W1 -q $LAN_IP &>/dev/null if [ $? -eq 0 ] then exit 0
Rsync @home_server:home_server_setup:other_services
7 Hits, Last modified:
ctHostKeyChecking=no \ -o UserKnownHostsFile=/dev/null \ -q user@host /usr/bin/hostname -s</cod... code>StrictHostKeyChecking no UserKnownHostsFile /dev/null LogLevel QUIET</code> For our backup utility... StrictHostKeyChecking no UserKnownHostsFile=/dev/null</code> In addition, add the following to the... onths When making the backups, the contents of ''/dev'', ''/proc'', ''/sys'', ''/tmp'', and ''/run'' sh
Debian / Ubuntu Network Setup @linux_router
5 Hits, Last modified:
m with this. In any case, you should always check dev names and not assume names, such as "eth0" To ch... m with this. In any case, you should always check dev names and not assume names, such as "eth0" To ch... .\\ My routing table had ''2001:470:1f2c:10d::/64 dev he-ipv6 proto kernel metric 256 pref medium'', I ... o do this: ''sudo ip r del 2001:470:1f2c:10d::/64 dev he-ipv6''.\\ I looked for ways to adjust the netp
NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
5 Hits, Last modified:
d populate so: <code> #!/bin/sh /sbin/upsmon -K >/dev/null 2>&1 && /sbin/upsdrvctl shutdown </code> Nex... profile variable ''/bin/upsc KPBUPS@localhost 2>/dev/null''. *A script file to succinctly log the UP... t every 10 minutes ''sudo Myscripts/ 2>/dev/null'',<code>#!/bin/bash # Logging output for NUT... =$logfile.$timestamp cp $logfile $newlogfile cat /dev/null > $logfile gzip -f -9 $newlogfile </code>
KPTree - Email Server Setup @home_server
4 Hits, Last modified:
"sudo apt update" "sudo apt install php7.0-dev php-pear php7.0-tidy php-imagick" (no php5-sasl, ... -soap php7.0-intl" "sudo apt install libidn11-dev libmagickwand-dev imagemagick" (libmagick++4?) "sudo apt install libsasl2-dev php-ssh2 php-http-webdav-server" (no libssh2-php,
ISP PPPoE Network Setup @linux_router
4 Hits, Last modified:
script: <code> ExecStartPre=/sbin/ip link set up dev eno1 ExecStartPre=/sbin/ip link add link eno1 nam... type vlan id 7 ExecStartPre=/sbin/ip link set up dev eno1.7 ExecStartPre=/sbin/ip addr add broadcast dev eno1 ExecStartPre=/sbin/ip route add via dev eno1 </code> <fs smaller>A reference to this pro
boot tools @tech_notes
4 Hits, Last modified:
list of column options * ''blkid'' * ''ls -l /dev/disk/by-id'', additional list options: * ''ls -l /dev/disk/by-uuid'' * ''sudo lshw -class disk'' * ... ount the the EFI System Partition: ''sudo mount /dev/sdd1 /boot/efi''\\ Install Grub boot loader: ''sudo grub-install /dev/sdd --target=x86_64-efi --efi-directory=boot/efi/
fsck - file system check @home_server:home_server_setup
3 Hits, Last modified:
tain intervals. To check this: ''sudo tune2fs -l /dev/sda1 | grep -i check''. *[[http://www.thegeekst... d configuration of a partition ''sudo tune2fs -l /dev/sdX'' ++++Home Server Index|<pagelist&header> *[... o display filesystem information is ‘’tune2fs -l /dev/sda2’’. The ‘’df’’ command lists current mounted
Linux Block Device Notes @home_server:home_server_setup:other_services
3 Hits, Last modified:
available partition information *''sudo parted /dev/sda'' - to partition the specific drive When in p... artition 1 ---- ====Format==== ''sudo mkfs.ext4 /dev/sda1'' - to format the drive ---- ====Fstab==== ... ===mount==== ===Local Device=== **mount -t ext4 /dev/sdb1 /run/media/diska** ===NFS Device=== To mou
IPMI Console Setup @home_server:home_server_setup:other_services
3 Hits, Last modified:
TIMEOUT=8 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="... l terminal size. * The command ''sudo stty -F /dev/ttyS1'' can be used to check the parameters of th... erial connection. * The command ''sudo stty -F /dev/ttyS1 115200'' can be used to set the ttyS1 seria
Commonly used commands and scripts @home_server:home_server_setup:other_services
3 Hits, Last modified:
| | php7.4-curl | | ✔ | ✔ | ✔ | | php7.4-dev | | ✔ | ✘ | ✘ | | php7.4-gd | | ✔ |... 0,55 * * * * /home/shared/Myscripts/ 2>/dev/null #Runs Nut scan and logs formated results to ... ries) 4 Special files (usually found in /dev) 5 File formats and conventions, e.g. /e
IPv6 Setup Notes @linux_router
2 Hits, Last modified:
logrotate @home_server:home_server_setup:other_services
1 Hits, Last modified:
KPTree Torrent VM Setup @home_server
1 Hits, Last modified:
VNC Server @home_server:home_server_setup
1 Hits, Last modified:
SSH Notes @home_server:home_server_setup:other_services
1 Hits, Last modified: