Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Docker @docker_notes
- >//**A Docker host that is acting or running as a router, e.g. using Traefik, the following may be needed ... P address with other LAN addresses, including the router / gateway. Linux forwarding is required for Doc... rward''. It would also adversely affect my Linux router should I attempt to load docker on this machine. To make matters worse my Linux router is based on nftables which may not operate well w
- turn server @docker_notes
- dresses can only be publicly accessed via a local router that performs NAT, subject to firewall rules. It... ccessible from the public network, subject to the router and firewall setup. In this case a TURN server wo
- PiKVM @tech_notes
- related information into my password manager. My router computers built in BMC/IMPI had failed and was di... TTPS. I wanted to use simple http behind a local router that would terminate the host https on a reverse
- sidebar
- *[[docker_notes:nginx-php-notes]] ++++ ++++Linux Router Setup| *[[linux_router:start]] *[[linux_router:background]] *[[linux_router:hardware]] *[[linux_router:ubuntu]] *[[linux_router:network]] *[[lin
- NFTables Configuration @linux_router
- {{tag>linux router NFtables firewall}} =====NFTables Configuration===== The best reference for nftables is... thub.com/wolfhechel/db7ed3be31feb104752e|nftables router]]. The reference at stosb is good, but not for a router [[https://stosb.com/blog/explaining-my-configs-nf... lot of experimenting the following is my NFTables router configuration file. Create the following file cal
- ISP PPPoE Network Setup @linux_router
- {{tag>linux router pppoe pppoed ISP mtu dns dhcp}} =====ISP PPPoE Network Setup===== A reasonably compreh... showthread.php?t=2341699|Setup Ubuntu Server as a router using a PPPoE connection]], [[https://samuel.kado... tps://scarff.id.au/blog/2019/nbn-hfc-with-a-linux-router/|Connecting to NBN HFC with a linux router] Internode router set up notes]] * [[https://scarff.id.au/bl
- Router Configuration & Server Setup @linux_router
- {{tag>linux router "router configuration" setup debian ubuntu snap snaps}} ======Router Configuration & Server Setup====== =====Router Configuration===== <fc #ff0000>[DRAFT]</fc> A router perf
- Docker - DHCP Server @docker_notes
- automatic fall over back up on my separate Linux router. I basically followed the Kea template [[https:/... KPTree.net's bare metal implementation of [[linux_router:dns_dhcp|dns - dhcp]], based upon ISC Bind9 and D
- Docker - DNS Server @docker_notes
- I originally operated it on bare metal on my home router computer. In mid 2023 I successfully moved my Bi... slave instance in a container running on my home router computer. I created a Docker Bind9 Image using b... =====Linux setup to forward packets===== The main router must be set to forward packets! The ability to fo... he master *The secondary DNS server runs on my router, it is set up as a slave server from the primary
- Docker mailserver @docker_notes
- ARTTLS protocol is used. I could possibly use my router, but this is getting too complex. To allow opera... The webmail.kptree.net successfully used Traefik router and successfully operated with the mailserver on
- Reverse Proxy Server @docker_notes
- config.yml</code> I have broken down the Traefik router dynamic configuration file, My config.yml into 2 ... figuration files. One for the http/https specific router configuration and the other for the tcp router configuration, I do not use any UDP router configurations to date. I placed these files in the sub-direct
- DHCP / DNS Setup @linux_router
- {{tag>linux router dns dhcp bind ip ipv6 radvd host dig nslookup}} ======DHCP / DNS Setup====== =====Outd... orked reliably well, when ever I shutdown the the router with DNS/DHCP servers my LAN would stop working. ... archive (tl;dr; roll-up) eventually. Actually my router that I was running these services was totally los... nger readily available, Kill-9 Ubuntu 16.04 based Router, Part 2 - DHCP| does not seem to be saved on [[ht
- Docker Host @docker_notes
- r functionality. I use nftables as my main edge router / firewall on bare metal. I could probably run this on a VM within Proxmox, but the Router hardware is not especially powerful and at this t... reason for me to do so at this time. My current router has an Intel N3700 CPU, maximum 8GB ram, procured... ow to use, but still functions well as a sub gb/s router. I also run a VM with Docker containers for a ba
- Basic Netfilter Function Block Diagram @linux_router
- {{tag>linux router mtu netfilter }} =====Basic Netfilter Function Block Diagram===== Both NFTables and IP... bles, will probably take a long time.\\ {{:linux_router:linux_netfilter.png?600|}} <code> The following i... ) functions, which are the basic requirements for router. Incoming Packets | ... | Network Processes | | Forward | | within Router | | Rules | |-------------------|
- TC - Traffic Control @linux_router
- {{tag>linux router TC Traffic Control}} ======TC - Traffic Control====== The Linux kernel's network stack ... ved on a LAN by dropping packets that arrive at a router before they get forwarded. There are more relevan... https://www.b1c1l1.com/blog/2020/03/26/linux-home-router-traffic-shaping-with-fq_codel/|Linux Home Router Traffic Shaping With FQ_CoDel]] *[[https://www.b1c1l