Search

You can find the results of your search below.

Matching pagenames:

Fulltext results:

Docker nginx / php notes @docker_notes
48 Hits, Last modified:
+++/etc/nginx/fastcgi.conf| <code> fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param QUERY_STRING $query_st... NTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_... NTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_... s is for historical reasons where ''fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;'' has to be separately configured in the lo
Back-up Server Old Setup @home_server:home_server_setup:other_services
41 Hits, Last modified:
:home_server_setup:other_services:ipmi#ipmi_start_script|IPMI startup script]] for description of this script. - Mount the back-up drives to the back-up serv... r:home_server_setup:other_services:ipmi#ipmi_stop_script|IPMI Stop script]] - ''sudo bash ~/Myscripts/ipmi_stop_05_40.s... rtn" else exit "$rtn" fi fi } #Script to Startup remote IPMI Server echo "------------... rtn=$? #rtn=10 # for error on test successtype #Script to mount remote backup drive func1="Mount /mntbac
Rsync @home_server:home_server_setup:other_services
22 Hits, Last modified:
pts/rsync_shared.sh'' #Note this is a local only script and takes no additional batch inputs when run! ++... plays havoc on scripts. If a prompt occurs, your script stops and waits for input. There are two ways we can eliminate this. One is at the script level and the other is at the system level. If we... checks, then we can add the configuration to our script. This can be done with OpenSSH’s -o option. Here’
Docker mailserver @docker_notes
19 Hits, Last modified:
ON=82'' *All the /php82/ paths in the pre_start_script.sh, ''.config_php/scripts/pre_start_script.sh'' *The php-fpm82 reference in ''.config_php/... file ''ARG PHP_VERSION=82'' *Main configuration script ''pre_start_script.sh'', ''PHP_VERSION=82'' *s6-rc.d php-fpm longrun start script at s6-rc.d/php-fpm/run, the command ''/usr/sbin/p... tificates from Traefik certificate store]] python script *[[https://r4uch.com/export-traefik-certificate
KPTree Torrent VM Setup @home_server
13 Hits, Last modified:
N OpenVPN Linux CLI setup and associated download script worked well and was similar to the BTGuard setup,... h the following issues easily found: * Once the script was run PrivateVPN recommended using ''sudo privatvpn'' to run. The setup script creates a systemctl profile: openvpn@privatvpn.se... _. * The remote server server in the downloaded script no longer was correct and had to be changed to on
IPMI CLI Tools @home_server:home_server_setup:other_services
11 Hits, Last modified:
n it. =====IPMI BASH Scripts===== ====IPMI Start Script==== This script is used to start-up a remote BMC computer via ipmitool. The script performs some basic error checking a reporting, o... ng command to determine if it is actually up. The script exits with a 0 upon successful ping attempt or ot
Nextcloud Container @docker_notes
8 Hits, Last modified:
the user (PHP_AUTH_USER) (or '-' if not set); ; script - the main script called (or '-' if not set); ; last request cpu ... t length: 0 ; user: - ; script: /home/fat/web/docs/php/test_mem.ph... like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e ; %f: script filename ; %l: content-length of the request (fo... On common configurations, this may look more like SCRIPT_NAME than the ; expected pre-rewrite URI. ;
Docker init Systems @docker_notes
7 Hits, Last modified:
ices | | | │   │   └── pre_start_script | | User pre start script (if required) | | | │   ├── producer-for ... the following solution, by using the s6 pre_start_script to add a link ''ll.sh'' script in to the ''/bin'' directory. <code bash>#get my
NFTables Configuration @linux_router
7 Hits, Last modified:
t local ssh ports and have a separate end of boot script with the full nftables script.\\ :!: It is important to remember that the ord... configuration file can be made into an executable script as follows. *Add the following at the top of... configuration file can be made into an executable script as follows. *Add the following at the top of... FragmentPath nftables'' shows where the systemctl script is located; /lib/systemd/system/nftables.service,
samba @home_server:home_server_setup:other_services
7 Hits, Last modified:
fect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: ... e store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be creat... # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password -... achines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine a
NFTables IP Control @linux_router
5 Hits, Last modified:
e sets. *''sudo vim controllist.sh'' : This script automates the entry of a a range of IP address wi... al "$cmd1"; </code> ++++ * A key change to this script to improve functionality would be to allow an inp... 'sudo vim deletecontrol.sh'' : This is a simple script to flush the control list. ++++deletecontrol.sh|... t to run ''sudo chmod 774 controllist.sh'' on the script files to make them executable I then created a c
NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
5 Hits, Last modified:
''/bin/upsc KPBUPS@localhost 2>/dev/null''. *A script file to succinctly log the UPS data, using cron to run script every 10 minutes ''sudo Myscripts/UPSScan.sh 2>/d... >>"$strf" </code> *A script file to rotate a log file out to a dated gzip log... new empty log file, the log file with path is the script input ''sudo rotatelog.sh /var/log/UPSLog.Log'',
BASH Customisation @home_server:home_server_setup:other_services
3 Hits, Last modified:
er. \\ [[https://terracoders.com/blog/bash-simple-script-changing-display-brightness-xrandr|Bash: A Simple Script for Changing Display Brightness with XRANDR]] *
SSH Notes @home_server:home_server_setup:other_services
3 Hits, Last modified:
t are run after the MOTD is displayed. The Debian script is very simple: <code bash> #!/bin/sh uname -snr... t I do not like. This system status information script, ++++/etc/update-motd.d/50-landscape-sysinfo| <co... n $threshold" fi</code> ++++ The main information script is written in python3, ++++/usr/bin/landscape-sys
Wireguard VPN access from WAN to LAN @linux_router
3 Hits, Last modified:
o vim /etc/nftables.conf'' ++++ ''nftables router script''| <color blue>#!/usr/sbin/nft -f </color> ++ | +... run</color>++ \\ <tab3> \\ <tab3><color blue># script variable definitions</color> ++ | \\ +<color #202... would not link the IP address even though the wg script was clearly running the commands, ''sudo systemct
Commonly used commands and scripts @home_server:home_server_setup:other_services
3 Hits, Last modified:
dokuwiki setup notes @home_server
3 Hits, Last modified:
Docker @docker_notes
3 Hits, Last modified:
logrotate @home_server:home_server_setup:other_services
2 Hits, Last modified:
VNC Server @home_server:home_server_setup
2 Hits, Last modified:
Docker Deluge Image / Service @docker_notes
2 Hits, Last modified:
KPTree - Home Desktop Setup @home_server
2 Hits, Last modified:
ISP PPPoE Network Setup @linux_router
2 Hits, Last modified:
Dokuwiki @docker_notes
2 Hits, Last modified:
Python Programming Notes @python
2 Hits, Last modified:
Web Server setup @home_server
2 Hits, Last modified:
Docker - DHCP Kea Server @docker_notes
2 Hits, Last modified:
Wifi Router / Access Points @linux_router
2 Hits, Last modified:
Shell Builtin Commands @tech_notes
1 Hits, Last modified:
Router VM @linux_router
1 Hits, Last modified:
PiKVM @tech_notes
1 Hits, Last modified:
Reverse Proxy Server - Traefik @docker_notes
1 Hits, Last modified:
TC - Traffic Control @linux_router
1 Hits, Last modified:
Basic Netfilter Function Block Diagram @linux_router
1 Hits, Last modified:
Docker Host @docker_notes
1 Hits, Last modified: