Search

You can find the results of your search below.

Fulltext results:

Docker Host
11 Hits, Last modified:
e circa November 2024, I have replaced. ++My old router tl;dr|My previous router basic failed to operated reliably circa October 2... slow to use, but did function well as a sub gb/s router. I also run a VM with Docker containers for a ba... et speed is about 920Mb/s down and 90Mb/s up this router is still suitable for purpose. I suspect it will ... ble WAN speeds are above 1000Mbps. I replaced the router early 2025 with an Intel N305, this is much faste
Docker - DHCP Kea Server
9 Hits, Last modified:
gadgets/2016/04/the-ars-guide-to-building-a-linux-router-from-scratch/|The Ars guide to building a Linux router from scratch]]. It looks like he updated this [[h... etsEncrypt]]. In my earlier implementation of my router [[https://wiki.kptree.net/doku.php?id=linux_router:dns_dhcp|DHCP and DNS]] that was written on "bare... NS. There are more references on building a home router and related here: [[https://wiki.kptree.net/doku.php?id=linux_router:dns_dhcp#main_references_used_2017|Main reference... KPTree.net's bare metal implementation of [[linux_router:dns_dhcp|dns - dhcp]], based upon ISC Bind9 and D
Reverse Proxy Server - Traefik
7 Hits, Last modified:
figuration files. One for the http/https specific router configuration and the other for the tcp router configuration, I do not use any UDP router configurations to date. I placed these files in t... === For TCP and HTTPS services behind the Traefik router that require TLS the Traefik router must be specified to pass through the TLS, that i... c.traefik.io/traefik/routing/routers/#passthrough|Router passthrough]] *[[https://blog.alexanderhopgood.
Docker - DNS Server
6 Hits, Last modified:
I originally operated it on bare metal on my home router computer. In mid 2023 I successfully moved my Bi... slave instance in a container running on my home router computer. I created a Docker Bind9 Image using b... highlevel only reference here]</color> The main router must be set to forward packets! It would seem tha... he master *The secondary DNS server runs on my router, it is set up as a slave server from the primary
Docker
6 Hits, Last modified:
s://docs.docker.com/network/iptables/#Docker on a router|Docker and iptables. Docker on a router]] the "simple" solution is to add FORWARD ACCEPT
Private LAN VPN Access
4 Hits, Last modified:
setup [[https://wiki.kptree.net/doku.php?id=linux_router:wireguard|KPTree wireguard]] on my router. This was installed on "bare metal" as was the nftable based router firewall. I later installed Bind9 DNS and Kea DHC... h easier than the manual "bare-metal" setup on my router. The docker setup is below: ++++docker-compose.y
turn server
3 Hits, Last modified:
dresses can only be publicly accessed via a local router that performs NAT, subject to firewall rules. It... ccessible from the public network, subject to the router and firewall setup. In this case a TURN server wo... n.kptree.net'' and ''stun.kptree.net'' *The LAN router needs to forward WAN requests to port 3478 to the
Docker mailserver
2 Hits, Last modified:
ARTTLS protocol is used. I could possibly use my router, but this is getting too complex. To allow opera... The webmail.kptree.net successfully used Traefik router and successfully operated with the mailserver on
Nextcloud Container
2 Hits, Last modified:
need to use ssl, as this is performed by the edge router I am using, Traefik. The Collabora server is http... as external ssl termination performed by upstream router, so the external addressing must be https. * ''
Docker Deluge Image / Service
1 Hits, Last modified:
this [[https://wiki.kptree.net/doku.php?id=linux_router:wireguard|Wireguard VPN access from WAN to LAN]]/
Dokuwiki
1 Hits, Last modified:
#s_d => source directory s_d="/mnt/docker_store/router_backup/wiki/config/dokuwiki/" #d_d => destinatio