Search

You can find the results of your search below.

Fulltext results:

ISP IPoE DHCP Setup Notes
73 Hits, Last modified:
Duplex: full Port: tp Address: 192.168.5.2 ... t[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 8 Jan 04 07:34:37 kptr dhclient[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 11 Jan 04 07:34:49 kptr dhclient[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 18 Jan 04 07:35:07 kptr dhclient[763]
Wireguard VPN access from WAN to LAN
47 Hits, Last modified:
he server side: ''sudo tcpdump -i wan_device -c 5 port vpn_port'', where wan_device is the wan device, in my case ppp1 and vpn_port is the port number wireguard is set to, in my cas... er address</color>\\ <tab3>define <color red>vpn_port = 51914</color><color blue> #definition of wireguard server port</color>\\ <tab3><color #000060/#F0F0FF>#define</... e TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but we only ... #F0F0E0> This creates a set of type inet_service (port number or range). The flags interval directive enables port ranges to be used. After that, you just set eleme
NFTables Configuration
38 Hits, Last modified:
er address</color>\\ <tab3>define <color red>vpn_port = 51914</color><color blue> #definition of wireguard server port</color>\\ <tab3><color #000060/#F0F0FF>#define</... e TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but we only ... #F0F0E0> This creates a set of type inet_service (port number or range). The flags interval directive enables port ranges to be used. After that, you just set eleme... ence all of these values in the rules. We can use port numbers, service names and port ranges.\\ Sets provide a performant way to use g
NFTables IP Control
10 Hits, Last modified:
both TCP and UDP, but we only use TCP! # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, # but we only use UDP! # domain is port 53 for DNS requests on TCP & UDP. # openvnp is port 1194 on both TCP and UDP, but we are not using yet.... om LAN iifname $lan counter accept # By port is a pain in the arse! # iifname $lan tc
Router Miscellaneous
8 Hits, Last modified:
elow. **IANA Service Name and Transport Protocol Port online [[https://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml|Number Registry]]** [[https://tools.ietf.org/html/rfc3232|RFC... g/html/rfc6335|RFC 6335]] also has information on Port Number Registry and the associated database. Mos... nition. Some ports of interest: <code> Name Port Protocols Description ftp-data 20 {tcp,
Debian Server Network Setup
4 Hits, Last modified:
rt will be setup to look like a router with 1 WAN port and 3 LAN port. The WAN port will be setup on NIC1 with the LAN ports 1-3 will
Router VM
3 Hits, Last modified:
* Access to public internet modem, via 1 Ethernet port - **the WAN (Wide Area Network) connection** ... add in PCIe card that provided a 2.5GB/s Ethernet port. All these physical ports are connected to a comm... all * NAT (Network Address Translation) * Port forwarding to basic services * Main public
Linux Router Background
3 Hits, Last modified:
m router with 4 100Mbps ethernet ports and 2 VoIP port. One ethernet port was set up as WAN connection. -The 1000Mbps eth... Linux Debian. (The WAN is connected to a 2.5Gbps port) -The speed tester was run in automatic mode, i
Router Hardware
3 Hits, Last modified:
NIC, but that is full 1Gbe and there are 2 USB 3 port to allow another full 1Gbe NIC off USB. *An old... ). This unit also comes with a dedicated IPMI LAN Port, allowing full remote KVM operation on the networ... o a Supermicro based unit with dedicated IPMI LAN Port and has given me a good 5 years of service to dat
Router Configuration, Switch & Server Setup
3 Hits, Last modified:
e the of keypoints: *I set-up Ubuntu to use LAN port 2, as I want to use LAN port 1 as the Router WAN port. *I do not encrypt the home directory. (See How
Wifi Router / Access Points
3 Hits, Last modified:
4 x 1Gbit ethernet ports and 1 x 2.5Gbit ethernet port. The WAX206 does not have a USB port. There is a currently supported [[https://openwr... has 5 x 1Gbit ethernet ports. It has 1 x USB 3.0 port. Only having 8MB flash capacity reduces the 3rd
IPTables Configuration
2 Hits, Last modified:
--dport 33434:33523 -j REJECT --reject-with icmp-port-unreachable # DNS - accept from LAN -A INPUT -i ... t --limit 1/s --limit-burst 5 -j ACCEPT # Furtive port scanner -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN