Search

You can find the results of your search below.

Fulltext results:

ISP IPoE DHCP Setup Notes
73 Hits, Last modified:
Duplex: full Port: tp Address: 192.168.5.2 ... t[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 8 Jan 04 07:34:37 kptr dhclient[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 11 Jan 04 07:34:49 kptr dhclient[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 18 Jan 04 07:35:07 kptr dhclient[763]
Wireguard VPN access from WAN to LAN
62 Hits, Last modified:
he server side: ''sudo tcpdump -i wan_device -c 5 port vpn_port'', where wan_device is the wan device, in my case ppp1 and vpn_port is the port number wireguard is set to, in my cas... er address</color>\\ <tab3>define <color red>vpn_port = 51914</color><color blue> #definition of wireguard server port</color>\\ <tab3><color #000060/#F0F0FF>#define</... routing.</color>\\ <tab6><color blue> # open ports refers to ports to open for input to this machine.</color>\\ <t... e TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but we only
NFTables Configuration
53 Hits, Last modified:
er address</color>\\ <tab3>define <color red>vpn_port = 51914</color><color blue> #definition of wireguard server port</color>\\ <tab3><color #000060/#F0F0FF>#define</... routing.</color>\\ <tab6><color blue> # open ports refers to ports to open for input to this machine.</color>\\ <t... e TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but we only ... #F0F0E0> This creates a set of type inet_service (port number or range). The flags interval directive enables port ranges to be used. After that, you just set eleme
Router Miscellaneous
20 Hits, Last modified:
in Linux]] * [[https://www.stationx.net/common-ports-cheat-sheet/|Common Ports Cheat Sheet: The Ultimate Ports & Protocols List]] * [[https://www.geeksforgeeks.org/50-common-ports-you-should-know/|50 Common Ports You Should Know]] * Distribution List of Ports (information only) * <fc #ff00ff>Gentoo</fc> [[ht... inics.net/lists/netfilter/msg56329.html|how to do port forwarding using nftables map]] *Redhat develop
NFTables IP Control
18 Hits, Last modified:
e forward and nat chains refer to routing. # open ports refers to ports to open for input to this machine. # ssh is port... both TCP and UDP, but we only use TCP! # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, # but we only use UDP! # domain is port 53 for DNS requests on TCP & UDP. # openvnp is port 1194 on both TCP and UDP, but we are not using yet.
Router VM
10 Hits, Last modified:
ng as a network switch for the connected physical ports. (On my home server I have 4 x 1GB/s Ethernet ports and an add in PCIe card that provided a 2.5GB/s Ethernet port. All these physical ports are connected to a common network bridge device.... t allows connections of multiple virtual Ethernet ports to the bridge device. This is a commonly used fe... all * NAT (Network Address Translation) * Port forwarding to basic services * Main public
Debian Server Network Setup
8 Hits, Last modified:
rt will be setup to look like a router with 1 WAN port and 3 LAN port. The WAN port will be setup on NIC1 with the LAN ports 1-3 will be on bridged NIC2-4. Ensure the bridg... ing 3 NICs are setup in bridge mode as router LAN ports. When setup in bridge mode the 3 ports effectively act as a switch with any able to acc
Router Hardware
8 Hits, Last modified:
SO-DIMM DDR5 4800MHz, 32GB(SAMSUNG). *Ethernet Ports: 2 x Marvell AQC113C-B1-C 10Gbps Network cards(v... : 2 x M.2 2242/2280 NVMe SSD, PCIe 2.0 x 1 *USB Ports: 2 x USB-A 3.0(5Gbps), 1 x USB-C 3.2 Gen2(10Gbps... NIC, but that is full 1Gbe and there are 2 USB 3 port to allow another full 1Gbe NIC off USB. *An old... wer (~8 - 10W), small size. They come with 2 SATA ports and mini PCI-E slots. By the time you fit them o
Linux Router Background
6 Hits, Last modified:
TP-Link VDSL modem router with 4 100Mbps ethernet ports and 2 VoIP port. One ethernet port was set up as WAN connection. -The 1000Mbps eth... uter with 2 x 2500Mbps and 2 x 10000Mbps ethernet ports running Linux Debian. (The WAN is connected to a 2.5Gbps port) -The speed tester was run in automatic mode, i
Wifi Router / Access Points
5 Hits, Last modified:
D Flash and 512MB RAM. It has 4 x 1Gbit ethernet ports and 1 x 2.5Gbit ethernet port. The WAX206 does not have a USB port. There is a currently supported [[https://openwr... D Flash and 128MB RAM. It has 5 x 1Gbit ethernet ports. It has 1 x USB 3.0 port. Only having 8MB flash capacity reduces the 3rd
Router Configuration, Switch & Server Setup
3 Hits, Last modified:
e the of keypoints: *I set-up Ubuntu to use LAN port 2, as I want to use LAN port 1 as the Router WAN port. *I do not encrypt the home directory. (See How
IPTables Configuration
3 Hits, Last modified:
e WAN -A POSTROUTING -o ppp1 -j MASQUERADE # WAN Ports DNAT to LAN -A PREROUTING -p tcp -m tcp -i ppp1 ... --dport 33434:33523 -j REJECT --reject-with icmp-port-unreachable # DNS - accept from LAN -A INPUT -i ... t --limit 1/s --limit-burst 5 -j ACCEPT # Furtive port scanner -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN
DHCP / DNS Setup
1 Hits, Last modified:
SchedulingPolicy=idle # Allow for binding to low ports and doing raw network access CapabilityBoundingS