Search
You can find the results of your search below.
Fulltext results:
- ISP IPoE DHCP Setup Notes @linux_router
- Duplex: full Port: tp Address: 192.168.5.2 ... t[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 8 Jan 04 07:34:37 kptr dhclient[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 11 Jan 04 07:34:49 kptr dhclient[763]: DHCPDISCOVER on enp1s0 to 255.255.255.255 port 67 interval 18 Jan 04 07:35:07 kptr dhclient[763]
- Wireguard VPN access from WAN to LAN @linux_router
- he server side: ''sudo tcpdump -i wan_device -c 5 port vpn_port'', where wan_device is the wan device, in my case ppp1 and vpn_port is the port number wireguard is set to, in my cas... er address</color>\\ <tab3>define <color red>vpn_port = 51914</color><color blue> #definition of wireguard server port</color>\\ <tab3><color #000060/#F0F0FF>#define</... routing.</color>\\ <tab6><color blue> # open ports refers to ports to open for input to this machine.</color>\\ <t... e TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but we only
- turn server @docker_notes
- ongo-userdb="mongodb://[username:password@]host1[:port1][,host2[:port2],...[,hostN[:portN]]][/[database][?options]]" # Redis database con... server for TLS & DTLS services in form of # <ip>:<port>. If the port number is omitted, then the default port # number 5349 for the TLS/DTLS protocols will be ... t is always ON. # See also options cli-ip and cli-port. # #no-cli #Local system IP address to be used f... # is 127.0.0.1. # #cli-ip=127.0.0.1 # CLI server port. Default is 5766. # #cli-port=5766 # CLI access
- NFTables Configuration @linux_router
- er address</color>\\ <tab3>define <color red>vpn_port = 51914</color><color blue> #definition of wireguard server port</color>\\ <tab3><color #000060/#F0F0FF>#define</... routing.</color>\\ <tab6><color blue> # open ports refers to ports to open for input to this machine.</color>\\ <t... e TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but we only ... #F0F0E0> This creates a set of type inet_service (port number or range). The flags interval directive enables port ranges to be used. After that, you just set eleme
- Docker nginx / php notes @docker_notes
- E_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; ... E_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name;
- Docker @docker_notes
- eps on giving. A few days later I notice that my Portainer instance, that was running in Docker could not see the VM running portainer docker instances, it show the error: "Failed loading environment". The remote Portainer agents were operating. The Local Portainer instance runs on a Socket, whereas the agent... sideration. =====Portainer===== [[https://www.portainer.io/|Portainer]] is a handy web view into the Docker system... r as per this docker documentation [[https://docs.portainer.io/start/install/server/docker/linux|Install Portainer with Docker on Linux]]! A lot of the offici
- Reverse Proxy Server - Traefik @docker_notes
- tim.github.io/tree/master/reference_files/traefik-portainer-ssl/traefik|here.]], also look at **Portainer's** instructions here: [[https://docs.portainer.io/advanced/reverse-proxy/traefik|Deploying ... . =====Entrypoints===== The Standard entry point port normally defined are HTTP (port 80 and perhaps 8080) and HTTPS (port 443). If you are using other services then addit... eed to be defined, as required for each service / port. Mail servers are an example that requires use o... L connections. //Do not forget to expose the used ports in the Docker / Docker Compose file.// ====Refe
- Router Miscellaneous @linux_router
- in Linux]] * [[https://www.stationx.net/common-ports-cheat-sheet/|Common Ports Cheat Sheet: The Ultimate Ports & Protocols List]] * [[https://www.geeksforgeeks.org/50-common-ports-you-should-know/|50 Common Ports You Should Know]] * Distribution List of Ports (information only) * <fc #ff00ff>Gentoo</fc> [[ht... inics.net/lists/netfilter/msg56329.html|how to do port forwarding using nftables map]] *Redhat develop
- Docker mailserver @docker_notes
- pages. The server is normally setup to listen on port 9000. Additional servers can be setup using other ports. This allows servers per app and different serve... n pools that are differentiated by ip address and port, or socket file. If the client and servers are on... e machine they can communicate via local host and port or via socket file. If remotely hosted they communicate via ip address and port number. The pool definition only allows referenc
- Nextcloud Container @docker_notes
- web: image: nginx restart: always ports: - 8180:80 depends_on: - app ... requests. ; Valid syntaxes are: ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv... ddress on ; a specific port; ; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on ;
- NFTables IP Control @linux_router
- e forward and nat chains refer to routing. # open ports refers to ports to open for input to this machine. # ssh is port... both TCP and UDP, but we only use TCP! # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, # but we only use UDP! # domain is port 53 for DNS requests on TCP & UDP. # openvnp is port 1194 on both TCP and UDP, but we are not using yet.
- KPTree - Email Server Setup @home_server
- rform login is ''ssl:%%//%%sub1.example.com'' and port 993 (standard IMAP secure port) *Similarly, The SMTP server host is ssl:sub1.example.com and port 25 (not 465). There is no SMTP username and passw
- KPTree Torrent VM Setup @home_server
- **-p 8080:8080 -p 9777:9777/udp \** -p IP:host_port:container_port. The Kodi ports are described below, with source references. Unl... sometimes was IPv6 (strange) Kodi headless webui port is on port 8080, see Kodi documentation Web interface and We... docker <name> log file online output *''docker port <name>'' to see docker <name> port mappings to host ==Start container at boot:== I
- Router VM @linux_router
- ng as a network switch for the connected physical ports. (On my home server I have 4 x 1GB/s Ethernet ports and an add in PCIe card that provided a 2.5GB/s Ethernet port. All these physical ports are connected to a common network bridge device.... t allows connections of multiple virtual Ethernet ports to the bridge device. This is a commonly used fe... all * NAT (Network Address Translation) * Port forwarding to basic services * Main public
- Docker - diun & ntfy @docker_notes
- bled, ntfy will listen # on a dedicated listen IP/port, which can be accessed via the web browser on http://<ip>:<port>/debug/pprof/. # This can be helpful to expose bo