Search
You can find the results of your search below.
Fulltext results:
- Linux Block Device Notes @home_server:home_server_setup:other_services
- *''mklabel gpt'' to give drive label gpt *''mkpart help mkpart'' to list specific help items on mkpart *''mkpart primary ext4 0% 100%'' to make a partition that take the full optimised drive area *''rm 1'' to remove partition 1 ---- ====Fo... //www.digitalocean.com/community/tutorials/how-to-partition-and-format-storage-devices-in-linux|How To Partition and Format Storage Devices in Linux]] ----
- SSH Notes @home_server:home_server_setup:other_services
- ns and Usage:") # get all disk partitions partitions = psutil.disk_partitions() for partition in partitions: print(f"=== Device: {partition.device} ===") print(f" Moun... pe: {partition.fstype}") try: partition_usage = psutil.disk_usage(partition.mountpoint) except PermissionError: ... continue print(f" Total Size: {get_size(partition_usage.total)}") print(f" Used: {get
- KVM Setup
- 0>//**we can also use this to confirm the correct partition to expand**//</fc>. *We the backup VM di... o mount qcow2 images. *''sudo modprobe nbd max_part=16'' will load it with support for 8 block device... sudo fdisk /dev/nbd0 -l'' will list the available partitions in /dev/nbd0. *Use ''sudo partprobe /dev/nbd0'' to update the kernel device list. *Use ''ls
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- de> ++++ =====LVM===== With the availability of Gparted to adjust partitions on the run I do not know if LVM is required... //www.cyberciti.biz/faq/linux-mount-an-lvm-volume-partition-command/|Linux mount an LVM volume / partition command]] =====NFS===== To check available s... lly create the # snapshot_root directory. This is particularly useful if you are backing # up to removab... # If this is enabled, rsync won't span filesystem partitions within a # backup point. This essentially p
- Rsync @home_server:home_server_setup:other_services
- ame as %%--partial --progress%%| | | ''%%--%%partial'' |keep partially transferred files| | | ''%%--%%progress... are sent to the server rather than just the last parts of the filenames.| | | ''%%--%%delete-excl... shot===== Monitoring and testing is an essential part of any backup procedure. There's nothing worse th... y time or never requiring a password at all for a particular command line. It can also be configured to
- Network Setup
- e conflicting methods operating at the same time, particularly on the same interface. ++++old, tldr;| T... n specifying the rate in which we'll ask our link partner to transmit LACPDU packets, default is slow or 0: *slow or 0, Request partner to transmit LACPDUs every 30 seconds *fast or 1, Request partner to transmit LACPDUs every 1 second *bond
- fsck - file system check
- {{tag>linux fsck format partition boot corrupt parted}} =====fsck - file system check===== Use fsck to check and repair a file... l with use.) *To check current disks use ''sudo parted -l''. (This is a disk partition command, more modern than fdisk. Be careful ... /4 file system information and configuration of a partition ''sudo tune2fs -l /dev/sdX'' ++++Home Serve... xt -> *''lsblk'' by itself give the basic drive partition and mount point information. *''lsblk -o N
- SWAP Files @home_server:home_server_setup:other_services
- wapon -a'' turns it back on) *To prevent a SWAP partition being mounted at boot comment out the swap partition in /etc/fstab, ''sudo vim /etc/fstab''. (Ano... that this article also warns against use of SWAP partitions with SSD storage. This article also mention
- Simlinks @home_server:home_server_setup:other_services
- ool.com/2012/08/move-files-and-directories-inodes-part-3.html|Move files and directories : Inodes Part 3]] ---- <- home_server:home_server_setup:othe
- IPMI Console Setup @home_server:home_server_setup:other_services
- cal serial port and serial terminal support. Key parts to this are: -Setting up Linux to redirect mai... s/serial-console.html|systemd for Administrators, Part XVI]] which discusses Gettys on Serial Consoles (... s/serial-console.html|systemd for Administrators, Part XVI]] *[[https://stackoverflow.com/questions/26
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- 7 years. In all that time I never got the upsmon part of it operational. This monitors the UPS and send... be based upon init.d (located in /etc/init.d), in particular /etc/init.d/nut-server and /etc/init.d/nut-... reates scripts in /run/systemd/generator.late, in particular, ups-monitor.service. To see running proce
- MONIT @home_server:home_server_setup:other_services
- ub.co.za/how-to/how-secure-ubuntu-1604-lts-server-part-1-basics|How to secure an Ubuntu 16.04 LTS server - Part 1 The Basics]]. [[https://www.exratione.com/2019
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- possible to treat individual, simple utilities as part of a greater whole. And that last concept—breaki... is the tool you use to find lines that contain a particular string of text. For example, let's say you
- Conky @home_server:home_server_setup:other_services
- https://dai-trying.com/tutorials/building-a-conky-part-1-configuration/|Building a conky Part 1 Configuration]] ---- <- home_server:home_serv
- BASH Customisation @home_server:home_server_setup:other_services
- # Gets the total disk usage on your machine alias partusage='df -hlT --exclude-type=tmpfs --exclude-type=devtmpfs' # Shows the individual partition usages without the temporary memory values a