Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- Network Setup @home_server:home_server_setup
- orkd]] *[[https://man.archlinux.org/man/systemd.network.5|systemd.network - Network configuration]] *[[https://www.freedesktop.org/software/systemd/man/latest/systemd.network.html|Systemd documentation: systemd.network]] =====Archived Network Setups===== ++++Network ... aded: ''sudo apt install bridge-utils'' Edit the network configuration file: ''/etc/network/interfaces'' as follows: <code># This file descr... LAN1(eth0) LAN2(eth1) VGA </code> Edit the network configuration file: ''/etc/network/interfaces'' as follows: <code> # This file descr
- Debian Server Network Setup @linux_router
- ded: ''sudo apt install bridge-utils''. Edit the network configuration file: ''/etc/network/interfaces'' as follows: ++++/etc/network/interfa... a is not used here. ++++ It is important that the network/interfaces method is disable or strange difficult to diagnose network affect may happen. Basically ensure that all item... am using Debian 12 now and am moving back to /etc/network/interfaces for network configuration. As the DHCP and DNS server now ru... /etc/netplan/50-cloud-init.yaml #mv /etc/netplan/network.yaml /etc/netplan/network.yaml.old ln -sf /etc/nftables.conf.orig /etc/nfta
- Docker @docker_notes
- docker network ls'' | List all volumes| |''docker network create NETWORK'' | Create a NETWORK| |''docker network inspect NETWORK'' | Show information (json formatted)| |''docker network rm NETWORK'' | Destroy a NETWORK| |''%%docker network ls --filter="dangling=true%%... etwork arrangement I know nothing about. - None network - no assigned network, container has no external network connectivity ====References==== *[[https://www.fobwp.com/network_mode-host-docker-compose-guide/|Using network_mode: host in Docker Compose Explained]] *[[htt
- Router Miscellaneous @linux_router
- [https://www.tecmint.com/darkstat-web-based-linux-network-traffic-analyzer/|Darkstat – A Web Based Linux Network Traffic Analyser]], is a relatively low resource ... se special addresses for private LANs (Local Area Network)s with NAT (Network Address Translation) used to connect the LANs to ... interface-ubuntu-linux/|How To Setup Bridge (br0) Network]], & [[https://www.cyberciti.biz/faq/debian-network-interfaces-bridge-eth0-eth1-eth2/|Debian Linux: Configure Network Interfaces As A Bridge / Network Switch]] *Unixmen Ubuntu [[https://www.unixmen.
- Docker Deluge Image / Service @docker_notes
- e-openvpn-nftables /bin/sh%%'' *The docker host network option also has problems the entire host network is placed on the VPN! Also it stops working when ... 1s0 macnet1 </code> *[[https://docs.docker.com/network/network-tutorial-macvlan/|Docker Docs: Networking using a macvlan network]] *[[https://docs.docker.com/compose/networking... ackoverflow.com/questions/49600665/docker-macvlan-network-inside-container-is-not-reaching-to-its-own-host|Docker Macvlan network inside container is not reaching to its own host]... -v /mnt/disk2/Media/Temp/Complete:/app/Complete --network macnet1 --ip=192.168.1.98 --cap-add=NET_ADMIN --n
- KPTree Torrent VM Setup @home_server
- ake sure that you can communicate within your own network if Private Network option is enabled ip saddr 192.168.0.0/16 ... ake sure that you can communicate within your own network if Private Network option is enabled ip saddr 192.168.0.0/16 i... ake sure that you can communicate within your own network if Private Network option is enabled iptables -A INPUT -s 192.168.0.... y check the eth0 / tun0 references match.) *The network configuration file can be found at ''/etc/network/interfaces'' *If iptables is not installed run
- NFTables Configuration @linux_router
- [https://wiki.kptree.net/doku.php?id=linux_router:network#ubuntu_network_-_interface_setup|network interface]].</color>++\\ <tab3>define <color red... [https://wiki.kptree.net/doku.php?id=linux_router:network#ubuntu_network_-_interface_setup|network interface]].</color>++\\ <tab3>define <color red... oopback-to-forwarded-public-ip-address-from-local-network-hairpin-nat|Loopback to forwarded Public IP address from local network - Hairpin NAT]] The following commands provide a... or IPv6, hence unless NAT is used in a IPv6 local network hairpin. * Whilst investigating this matter's co
- Router Configuration, Switch & Server Setup @linux_router
- n IP address to interface eth0 Once the computer network has been manually assigned and network reset check that the network address and mask have been correctly set. If the assigned network mask is incorrect, that is in most cases not /24 ... <- linux_router:hardware|Prev page ^ linux_router:start|Start page ^ linux_router:network|Next page ->
- turn server @docker_notes
- URN)]] is a protocol that assists in traversal of network address translators (NAT) or firewalls for multim... unning servers on well known ports in the private network through a NAT; it supports the connection of a us... es not allow unsolicited access to the local area network address space. Interestingly IPv6 is not limite... dress area is directly accessible from the public network, subject to the router and firewall setup. In thi
- KVM Setup @home_server:home_server_setup
- edium.com/@aysadx/linux-nbd-introduction-to-linux-network-block-devices-143365f1901b|linux NBD: Introduction to Linux Network Block Devices]] *[[http://alexeytorkhov.blogspo... sudo modprobe nbd max_part=8'' to enable the nbd (network block device) kernel module on host *''sudo ... ' to use qemu-nbd to connect your qcow2 file as a network block device *''sudo fdisk /dev/nbd0'' to he... --%%disconnect /dev/nbd0'' to disconnect the disk network block device *Qemu-discuss [[https://lists.nong
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- (listening ornon-listening) ''sudo hwinfo -class network'' to list network heard ware adapter properties =====pbcopy pbpaste... :home_it_setup]] *[[home_server:home_server_setup:Network_setup]] *[[home_server:home_server_setup:kvm]] *[
- Docker - DHCP Kea Server @docker_notes
- en/latest/arm/config-templates.html#template-home-network-of-a-power-user|Home Network of a Power User]]. I was never quite sure I had ... en/latest/arm/config-templates.html#template-home-network-of-a-power-user|Template: Home Network of a Power User]] *[[https://kb.isc.org/docs/
- KPTree - Home Desktop Setup @home_server
- vided from work. These are often corporate based network licenses that only work if connected to the network. There is a method to fix a license to a machine... ==== For some reason Windows 10 will not show my network drives in the Explorer Network directory. Even when it did work it was slow to show the network drives. I can simply type in the network drive into the path, e.g. "\\User1NetworkDrive", ... **The GUI option in Windows is to right click the network icon in file explorer. Then select the option map network drive. A similar option to Disconnect network dr
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- get </code> My system takes a bit of time for the network system to fire up, so I delay the NUT driver startup until after the network is up, by adding the directive "After=network-online.target". Unfortunately when this script is run, "sud... stem/nut-server.service <code> [Unit] Description=Network UPS Tools - power devices information server Afte... tem/nut-monitor.service <code> [Unit] Description=Network UPS Tools - power device monitor and shutdown con
- Reverse Proxy Server - Traefik @docker_notes
- === These containers all talk via a docker bridge network named proxy, ''docker network create proxy'' =====Traefik===== <code bash [enab... r.com/advanced-config/#best-practice-use-a-docker-network|Best Practice: Use a Docker network]] ====ssl certificates / openssl==== *''openss