Search
You can find the results of your search below.
Fulltext results:
- Network Setup @home_server:home_server_setup
- *[[https://thelinuxcode.com/debian_etc_network_interfaces/|All About the Debian /etc/network/interfaces File: The Comprehensive Guide]] (/etc/network/in... d) *[[https://thelinuxcode.com/reload-network-interfaces-debian/|A Comprehensive Guide on Reloading /etc/network/interfaces in Debian]] *[[https://thelinuxcode.com/rest... nd/]] *[[https://www.baeldung.com/linux/network-interface-configure|Understanding and Configuring Linux Network Interfaces]] *[[https://raspberrypi.stackexchange.com/que... g configuration, e.g.</fc> ''sudo mv /etc/network/interfaces /etc/network/interfaces.old'' To check available interfaces and names:
- IPMI CLI Tools @home_server:home_server_setup:other_services
- he BMC. Local access is provided through a system interface like kCS (IO port). Remote access is provided through the onboard LAN interface (on IPMI supported motherboards). *OpenIPMI :... ers run on the managed system and provide a local interface to the IPMI card. They also support a primitive c... ment bus. A low speed (<100khz) system management interface supported on most PC and server motherboards. It ... communicate with motherboard sensors and Ethernet interface. *SuperoDoctor : A SuperMicro proprietary IPM
- KPTree Torrent VM Setup
- //askubuntu.com/questions/767786/changing-network-interfaces-name-ubuntu-16-04|Changing Network Interfaces name Ubuntu 16.04]] for further information on t... port is on port 8080, see Kodi documentation Web interface and Webserver Kodi has an EventServer mapped to ... "docker ps -a" After starting access to the web interface should be possible from the LAN, at the host IP a... uged'' *To start (/stop /enable) the deluge web interface daemon ''sudo systemctl start deluge-web'' *Sys
- samba @home_server:home_server_setup:other_services
- = no #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0 # Only bind to the named interfaces and/or n
- IPMI Console Setup @home_server:home_server_setup:other_services
- tting up Linux to redirect main boot terminal tty interface to use the serial port -Setup the console red... boot -BMC IPMI Client Setup (Using the BMC IPMI interface to redirect the computer serial tty to the BMC ne... /ipmitool sol info'' are: * -I : Selects IPMI interface to use; options seem to be: lan for IPMI 1.5 and lanplus for IPMI 2.0. (All my interfaces are IPMI 2.0) * -H : remote server address IP
- SSH Notes @home_server:home_server_setup:other_services
- cal) if_addrs = psutil.net_if_addrs() for interface_name, interface_addresses in if_addrs.items(): for addres... s in interface_addresses: print(f"=== Interface: {interface_name} ===") if str(address.family) ==
- Conky @home_server:home_server_setup:other_services
- e, disk storage, temperatures, processes, network interfaces, battery power, system messages, e-mail in-boxes... n uppercase use_xft = true,-- use the X FreeType interface library (anti-aliased font) font = 'Arimo:size=1... use_xft yes # use the X FreeType interface library (anti-aliased font) xftfont Monospace:siz... n uppercase use_xft = true,-- use the X FreeType interface library (anti-aliased font) font = 'Arimo:size=1
- KPTree - Email Server Setup
- stall netplan.io'' * ''sudo mv /etc/network/interfaces /etc/network/interfaces.old'' * ''sudo /etc/netplan/network.yaml''... ions instructions went with Roundcube for webmail interface. Furthermore some of the key features I was looki... luge'' *To start (/stop /enable) the deluge web interface daemon ''sudo systemctl start deluge-web'' *Sys
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- p-cli and php-fpm *php-cli – Command-line interface for PHP (used where only php command line interface is required, no fpm) *php-fpm - serves ph... rnet connections *''netstat -ie'' to see kernal interface table *''netstat -u'' to see status of TCP/IP c
- Manjaro Setup Notes @home_server:home_server_setup:other_services
- .. ====CUPS Printing==== * The CUPS printer interface is on web page; ''localhost:631'' * The PDF ... use_xft yes # use the X FreeType interface library (anti-aliased font) xftfont Monospace:siz
- KPTree - Home Desktop Setup
- on every machine. This coupled with learning the interface that is not identical to vanilla File Explorer ma
- Calibre Server @home_server:home_server_setup:other_services
- m about 5 years ago. From memory the Calibre web interface was a bit unpolished, however some of my phone ap
- KVM Setup @home_server:home_server_setup
- sudo virsh domiflist domain-name'' : List network interface(s) information of domain ''domain-name'' or domai
- Web Server setup
- omand==== This is the Nextcloud CLI (command line interface), the documentation can be found at [[https://doc
- My Home IT Setup @home_server:home_server_setup
- r controller]], that is probably the best network interfaced sprinkler controller available, both for home a