KPTree Wiki

Network Setup

Anonymous (anonymous@undisclosed.example.com) — 2025-08-17T00:27:04+00:00

network interface netplan nic setup loopback eth ethernet bridge bond networkd linux debian setup command Network Setup Most server have more than one network connection although one is technically enough. Routers by definition need to have a minimum of at least 2 network connections. It would seem that Debian Linux supports multiple methods to define network connections:

Debian Server Network Setup

Anonymous (anonymous@undisclosed.example.com) — 2025-11-30T10:55:19+00:00

linux debian ubuntu router network netplan interface vlan ipv6 ip Debian Server Network Setup Debian Network - Server Interface Setup As of Debian 10 (Buster) Debian still by default uses this interface Setup. It can be setup to use netplan inface. Ubuntu (as of version 14.04) defaults to Predictable Network Interface Names, also see Systemd Docs. I have no problem with this. In any case, you should always check dev names and not assume names, such as

Docker

Anonymous (anonymous@undisclosed.example.com) — 2026-01-17T01:03:10+00:00

linux docker cli installation network volume iptables nftables portainer Docker Docker is a set of platform as a service (PaaS) products that use OS-level virtualization to deliver software in packages called _containers_. The service has both free and premium tiers. The software that hosts the containers is called Docker Engine

Router Miscellaneous

Anonymous (anonymous@undisclosed.example.com) — 2025-10-14T05:59:15+00:00

linux router monitor links darkstat glances ntopng iftop nethogs Router Miscellaneous Monitoring There are a number of linux monitoring packages available. See these links for more examples see, 13 Linux Performance Monitoring Tools – Part 2, and 30 Linux System Monitoring Tools Every SysAdmin Should Know. Below are a few that I have tried and use. iftop iftop - display bandwidth usage on an interface by host Use

Docker Deluge Image / Service

Anonymous (anonymous@undisclosed.example.com) — 2025-06-21T05:00:34+00:00

linux docker image container openvpn docker_compose wireguard macvlan nftables Docker Deluge Image / Service I want a torrent service that uses a VPN and is set-up to block non VPN WAN (internet) access. On my virtual machine implementation of this I used the following 3 packages: deluge (deluged with deluge-web), openvpn and nftables. I have used both iptables and nftables and find nftables is definitely more elegant to use. As far as I can tell there is not a Docker image that will meet m…

KPTree Torrent VM Setup

Anonymous (anonymous@undisclosed.example.com) — 2023-04-30T09:43:13+00:00

deluge torrent server openvpn btguard nftables iptables systemd virtual machine linux ubuntu KPTree Torrent VM Setup Deluge Headless setup The main reference used is Havetheknowhow.com, specifically for the deluge headless setup, Havetheknowhow.com - How to install Deluge Headless. The Deluge support page is also a root source of knowledge Deluge systemd. Whatbox Deluge also has some interesting dialog. If installing on a virtual machine (VM) it is important to also have set up the NFS to al…

NFTables Configuration

Anonymous (anonymous@undisclosed.example.com) — 2025-03-02T07:31:20+00:00

linux router nftables firewall NFTables Configuration The best reference for nftables is at the dedicated wiki wiki nftables. Some other references I found nftables router. The reference at stosb is good, but not for a router Explaining My Configs: nftables. Nftables Cheatsheet After a lot of experimenting the following is my NFTables router configuration file. Create the following file called:

Router Configuration, Switch & Server Setup

Anonymous (anonymous@undisclosed.example.com) — 2025-05-22T08:07:33+00:00

linux router router_configuration setup debian ubuntu snap snaps switch network Router Configuration, Switch & Server Setup Router Configuration [DRAFT] A router performs the following key features: * A gateway between different network areas * Restrict network traffic * Forward Network traffic * Track network traffic, allows traffic incoming only if response to out going (one way traffic) This is primary firewall action and primary security action! This is often confused with NAT…

Docker - DHCP Kea Server

Anonymous (anonymous@undisclosed.example.com) — 2026-04-11T00:19:34+00:00

linux docker kea dhcp Docker - DHCP Kea Server Since mid 2023 I have been running a Docker ISC Kea Image using base Docker Alpine Linux images, with S6 init system. (ISC Kea is a modern replacement for their DHCP.) The main DHCP server runs on my main server and I have an automatic fall over back up on my separate Linux router. I basically followed the Kea template

turn server

Anonymous (anonymous@undisclosed.example.com) — 2025-03-02T05:34:56+00:00

linux docker turnserver turn server From wikipedia; Traversal Using Relays around NAT (TURN) is a protocol that assists in traversal of network address translators (NAT) or firewalls for multimedia applications. It may be used with the Transmission Control Protocol (TCP) and User Datagram Protocol (UDP). It is most useful for clients on networks masqueraded by symmetric NAT devices. TURN does not aid in running servers on well known ports in the private network through a NAT; it supports the c…

KVM Setup

Anonymous (anonymous@undisclosed.example.com) — 2025-02-08T09:11:05+00:00

server kvm virtual command debian machine qemu virsh qcow linux command setup nbd network block device KVM Setup I original setup my main server and virual machines all with Ubuntu. However I have started using Debian and find it leaner than Ubuntu. I am slowly moving my various servers and virtual machines to Debian. * Install And Configure KVM In Ubuntu 20.04 Headless Server * Installing KVM on Debian 10 * How To Install KVM Hypervisor on Debian 12|11|10 * How to install KVM server on …

Commonly used commands and scripts

Anonymous (anonymous@undisclosed.example.com) — 2025-09-29T05:35:59+00:00

linux dmesg command systemd journal journalctl tzdata timezone apt upgrade update install remove crontab man apropos tldr ip tc systemctl journalctl pbcopy pbpaste copy paste Commonly used commands and scripts dmesg sudo dmesg lists the OS boot messages between grub and os up. sudo dmesg --level=emerg,alert,crit,err,warn,notice,debug give a more succinct list of focus potential problem issues. * emerg - system is unusable

KPTree - Home Desktop Setup

Anonymous (anonymous@undisclosed.example.com) — 2026-03-16T07:04:18+00:00

mswindows windows setup tip notes personal license powertoys KPTree - Home Desktop Setup Background I have Windows on my main desk top machine, it is dual boot with Debian/XFCE. I am using Debian almost exclusively now. The BIOS based dual boot works well, I have it defaulting to Debian. I do not currently have a Windows VM setup on my main server. My 3 sons also have computers with Windows on them. Lastly, I am required to used company Windows machines at work. Hence I like to keep a li…

NUT (Network UPS Tools) Setup

Anonymous (anonymous@undisclosed.example.com) — 2023-05-13T02:20:29+00:00

linux debian nut ups server NUT (Network UPS Tools) Setup I purchased my current main UPS the Powershield Commander RT PSCRT1100 / Voltronic Power Otima II 1.1K in 2014 and setup NUT about this time, including early conversion to systemd scripts. I notice the Techno Tim Network UPS Tools (NUT) Ultimate Guide late 2022 has a perhaps more modern take on this.

Reverse Proxy Server - Traefik

Anonymous (anonymous@undisclosed.example.com) — 2025-01-07T01:00:11+00:00

linux docker traefik reverse_proxy proxy openssl ssl certificate portainer cloudsec Reverse Proxy Server - Traefik I seem to have gotten the Traefik reverse proxy working according to Techno Tim Put Wildcard Certificates and SSL on EVERYTHING (github reference_files for traefik-portainer-ssl). Also see Jim's Garage Your Traefik Isn't Secure (JimsGarage/Traefik-Secure/ Below is a basic description of the process that aligns with my configuration files. I do this for 2 reasons, both allowing m…

Docker-Compose

Anonymous (anonymous@undisclosed.example.com) — 2026-04-14T13:03:49+00:00

linux docker compose docker-compose docker_compose container network Docker-Compose * Docker Docs Compose specification, The Compose Specification Some commands: * docker-compose pull, it would seem this is required to ensure the latest image(s) is downloaded * docker-compose up -d --build --force-recreate * -d run as deamon (in background) * --build on required if the compose includes building an image

Router Hardware

Anonymous (anonymous@undisclosed.example.com) — 2025-09-20T09:35:01+00:00

linux router hardware Router Hardware ikoolcore-r2-max (Dec 2024) The Supermicro SYS-E200-9B has stopped working. It posts bios, but will not boot further. I suspect hardware failure of some sort. The BMC failed a few years ago. I have ordered a replacement ikoolcore-r2-max. The replacement comes with 2.5Gb/s and 10GB/s NICs and a more modern and faster 8 core

Router VM

Anonymous (anonymous@undisclosed.example.com) — 2025-03-08T09:28:50+00:00

linux router vm Router VM I have just decided to play with installing VM (virtual machines) on my Router hardware (2023-01). I have been reluctant to do this for a number of reasons. My separate listing for Router Hardware. Basically the machine is a bit old slow and under powered, but still adequate for what it does. I do not run a desktop on this machine, CLI (Command Line Interface only). The main services I am currently running on this machine are, all bare metal:

Docker Host

Anonymous (anonymous@undisclosed.example.com) — 2025-12-23T02:48:44+00:00

linux docker vm proxmox server vnc kvm libvirt selfhosted Docker Host KVM versus Proxmox I originally started using Linux KVM based VM, with QEMU and Libvirt on Ubuntu bare metal, circa 2014, this before was I was aware that Proxmox existed. Around 2020 I moved to Debian as my preferred bare metal distribution for server and desktop, I stopped using Windows as my main home desktop around this time. When I started playing around with Docker to create my own container images I preferred use of…

KPTree - Email Server Setup

Anonymous (anonymous@undisclosed.example.com) — 2024-03-24T08:01:21+00:00

linux mail server email postfix dovecot emailserver debian ubuntu horde postfixadmin admin clamav apache roundcube webmail certbot certificate KPTree - Email Server Setup Email Server Notes Setting up the email server on my home server was probably the most difficult task. Email server setup is intricate, risky and involves significant commitment and effort to setup reliably and maintain.

IPTables Configuration

Anonymous (anonymous@undisclosed.example.com) — 2024-12-15T02:31:01+00:00

linux router firewall iptables IPTables Configuration Having delved into IPtables and NFtables about the same time, my feelings are that NFTables is generally superior in just about every way, I can not be bothered explaining this, this is just my experience and feeling. I would preferentially use NFTables over IPtables where I have a choice. Unfortunately some software still uses IPtables, e.g. Docker. So it is good to be able to be sufficiently fluent and be able to work in both at this …

Basic Netfilter Function Block Diagram

Anonymous (anonymous@undisclosed.example.com) — 2024-06-23T01:11:37+00:00

linux router mtu netfilter Basic Netfilter Function Block Diagram Both NFTables and IPTables use the Netfilter framework provided in the Linux kernal. NFtables was implemented to supersede IPTables, which due to the widespread use of IPTables, will probably take a long time. The following is a basic block diagram of the Netfilter Filter and NAT (Network Address Translation) functions, which are the basic requirements for router. Incoming Packets | ┌────────────…

DHCP / DNS Setup

Anonymous (anonymous@undisclosed.example.com) — 2024-12-15T03:35:46+00:00

linux router dns dhcp bind ip ipv6 radvd host dig nslookup DHCP / DNS Setup Outdated I have moved my DNS and DHCP servers to Docker, Docker-DNS Server. I am still using ISC_Bind9, but am now using ISC_Kea for DHCP as ISC_Bind is no longer supported as of 2022. tl;dr; Further to this I am not looking at backups for both these services on my local area network. Whilst these services worked reliably well, when ever I shutdown the the router with

ISP IPoE DHCP Setup Notes

Anonymous (anonymous@undisclosed.example.com) — 2025-01-04T10:36:56+00:00

linux router bridged modem isp ipoe mtu dns dhcp ISP IPoE DHCP Setup Notes Notes on Setting up a Linux router for IPoE DHCP. old, tldr; After a few years of reasonable successful use of bridged VDSL modem with Linux Router running pppoe and nftables my ISP informed me that they do not use authentication on the connection with username and password. In fact they mention they used dhcp IPoE as well as PPPoE. I set up my spare modem as they described and it worked straight way. When I tried my…

Wireguard VPN access from WAN to LAN

Anonymous (anonymous@undisclosed.example.com) — 2025-05-24T13:09:25+00:00

linux router vpn wireguard docker qr_code qr Wireguard VPN access from WAN to LAN I use a Docker instance for my Wireguard server now. I use 2 forms of vpn (virtual private network) on my home server. * VPN to gain remote secure private access to my home LAN from the WAN (internet). This is the one I am describing here.

Docker - DNS Server

Anonymous (anonymous@undisclosed.example.com) — 2026-02-15T00:37:24+00:00

linux docker dns bind9 Docker - DNS Server What Is DNS and How Does It Work – A Comprehensive Guide I have been using Bind9 as my home LAN DNS for the past few years. I originally operated it on bare metal on my home router computer. In mid 2023 I successfully moved my Bind9 primary instance to my main home server in a container and created a slave instance in a container running on my home router computer. I created a Docker Bind9 Image using base Docker Alpine Linux images, with S6 init s…

Docker nginx / php notes

Anonymous (anonymous@undisclosed.example.com) — 2025-11-09T00:31:16+00:00

linux docker nginx php fast-cgi php-fpm Docker nginx / php notes nginx executable I had some trouble getting nginx with php-fpm to operate. So I tried to get working a simple setup to nut-out the nuances. I got it working using php-fpm socket with Apline Linux on 2 Docker instances, one running Nginx and the other php-fpm.

Private LAN VPN Access

Anonymous (anonymous@undisclosed.example.com) — 2024-12-28T03:23:56+00:00

linux docker wireguard openvpn Private LAN VPN Access The scope here concerns use of VPN (Virtual Private Network) to gain secure access from the public network to a local private network. It relates to private secure access and use from the public network. It does not consider public VPNs setup for public use.

My Home IT Setup

Anonymous (anonymous@undisclosed.example.com) — 2025-09-29T01:46:34+00:00

havetheknowhow snapraid opensprinkler personal background setup home server linux command My Home IT Setup Hardware - I have censored this for the time being.... A special mention goes to the Opensprinkler sprinkler controller, that is probably the best network interfaced sprinkler controller available, both for home and some commercial use. See separate section on my home sprinkler setup

Back-up Server Old Setup

Anonymous (anonymous@undisclosed.example.com) — 2025-01-03T00:55:46+00:00

linux debian backup lvm filesystem server nfs mount showmount Back-up Server Old Setup This has been more difficult than I would have thought. I have used rsnapshot the past couple of years (2020-21), but have never really been happy with it for many reasons. The main reason is that it has never worked well, the rsync is reasonably fast, but the rsnapshot takes far too long. Other problems include; difficulties in set-up, and concerns will reliability. Recently I noticed that Debian no longer …

ISP PPPoE Network Setup

Anonymous (anonymous@undisclosed.example.com) — 2024-09-21T12:10:33+00:00

linux router pppoe pppoed isp mtu dns dhcp ISP PPPoE Network Setup A reasonably comprehensive discussion on Ubuntu forums Setup Ubuntu Server as a router using a PPPoE connection, MTU and TCP MSS when using PPPoE. Also from Ubuntu forums How to Optimize your Internet Connection using MTU and RWIN. Ubuntu documentation ADSLPPPoE. PPPD manual page. Another reference is Confirm Blog Using PPPoE on Linux. Some other references: * Connecting to NBN HFC with a linux router] Internode router set…

TC - Traffic Control

Anonymous (anonymous@undisclosed.example.com) — 2024-06-23T00:14:23+00:00

linux router tc traffic control TC - Traffic Control The Linux kernel's network stack has network traffic control and shaping features. The iproute2 package installs the tc command to control these via the command line. Queuing controls how data is sent; receiving data is much more reactive with fewer network-oriented controls. However, since TCP/IP packets are sent using a slow start the system starts sending the packets slow and keeps sending them faster and faster until packets start getti…

Network Speed testing

Anonymous (anonymous@undisclosed.example.com) — 2025-01-18T13:48:17+00:00

linux network testing speed speed speed test testing tech notes technical Network Speed testing Use the iperf3 command to test network speeds. * iperf3 -s to start in server mode * iperf3 -c 192.168.1.10 -t 20 to test server on ip address 192.168.1.10 for 20 tries. * iperf3 -c 192.168.1.1 -t7 -b 2.5G -u 6001 * iperf3 -c 192.168.1.1 -t7 -R -b 2.5G -u 6001

IPMI CLI Tools

Anonymous (anonymous@undisclosed.example.com) — 2023-12-23T13:07:19+00:00

linux ipmi ipmitool cli bmc IPMI CLI Tools Much copied from Adam Sweet's wiki on IPMI. What is IPMI? IPMI is standard which allows remote server management, primarily developed by Intel. IPMI cards, known as Baseboard Management Cards (BMCs) are primitive computers in their own right and are operational all the time, so long as the server has a power source. The server itself does not need to be powered on, or the operating system operational for the BMC to work, it just needs a power source…

Docker mailserver

Anonymous (anonymous@undisclosed.example.com) — 2025-08-16T11:39:12+00:00

linux docker mail mailserver alpine dovecot postfix sqlite s6 s6-rc Docker mailserver This mailserver setup follows Workaround's SPmail guide for Debian 12 “Bookworm”. Key changes are that instead of installing on Debian 12 virtual machine1, with a Maria mysql database2, this setup is for installation on latest Alpine linux Docker image with s6-rc init using maria database. I toyed with sqlite and basically got it functional, however the support apps do not function with sqlite, so I went ba…

File Sharing

Anonymous (anonymous@undisclosed.example.com) — 2025-01-05T03:25:59+00:00

linux docker file_sharing share sharing syncthing privatebin File Sharing All the applications have pro and cons. This is listed at the beginning of each header. There have been considered 3 different levels of access as described by the applications used: * Nextcloud - a full privately hosted publicly accessible file shareing application, with many additional features

Docker Miscellaneous

Anonymous (anonymous@undisclosed.example.com) — 2025-12-29T00:09:36+00:00

linux docker it-tools dockge loki watchtower netbox Docker Miscellaneous IT-TOOLS Useful tools for developer and people working in IT. docker-compose.yml --- services: it-tools: image: 'corentinth/it-tools:latest' #ports: # - '8080:80' restart: unless-stopped container_name: it-tools networks: - proxy labels: - "traefik.enable=true" - "traefik.docker.network=proxy" - "traefik.http.routers.…

Wifi Router / Access Points

Anonymous (anonymous@undisclosed.example.com) — 2026-01-31T11:03:52+00:00

linux router wifi wifi_router access_point Wifi Router / Access Points I prefer to run higher quality wifi access points (AP) than the all in one type routers. My current router is X86 based running Linux Nftables on bare metal and Bind9 and Kea as well as some other services in Docker on a VM.

Domain names, domain nameservers, DNS and DHCP

Anonymous (anonymous@undisclosed.example.com) — 2025-08-09T03:11:23+00:00

Domain names, domain nameservers, DNS and DHCP Domain names, Domain nameservers, DNS and DHCP are a key part of the internet back bone. * DNS (Domain Name System) resolves the text domain names to the relevant IP (Internet Protocol) addresses. *

IPv6 summary notes

Anonymous (anonymous@undisclosed.example.com) — 2023-04-30T09:43:13+00:00

linux ipv6 IPv6 summary notes Largely taken from * onemarcfifty * What You Need to Know about IPv6 Link-Local Addresses Address length and format The IPv6 address is 128 bits (i.e. 16 bytes) long and is written in 8 groups of 2 bytes in hexadecimal numbers separated by colons: FDDD:F00D:CAFE:0000:0000:0000:0000:0001 Leading zeros of each block can be omitted, the above address can hence be written like this: FDDD:F00D:CAFE:0:0:0:0:1 We can abbreviate whole blocks of zeros with :: and w…

Conky

Anonymous (anonymous@undisclosed.example.com) — 2023-04-30T09:43:13+00:00

conkey linux debian manjaro setup monitor Conky Conky is a Linux system monitor tool using X Windows. Conky is highly configurable and is able to monitor many system variables including the status of the CPU, memory, swap space, disk storage, temperatures, processes, network interfaces, battery power, system messages, e-mail in-boxes Linux updates, runs many popular music players, and much more. Unlike system monitors that use high-level widget tool-kits to render their information, Conky i…

IPMI Console Setup

Anonymous (anonymous@undisclosed.example.com) — 2025-05-18T07:27:42+00:00

linux bmc grub ipmi console redirection cli IPMI Console Setup I have 3 computers from Supermicro with BMC and IPMI. The Supermicro provided utility program IPMIView is good, but the iKVM console redirection facility is woefully unreliable and also seems to be poorly documented! (Probably because it is based upon Java.) Interestingly this utility program is provided for Windows and Linux, and is even available in Manjaro AUR repositories. (This probably actually makes sense as many Supermic…

Rsync

Anonymous (anonymous@undisclosed.example.com) — 2026-01-31T14:34:43+00:00

rsync backup linux debian rsnapshot Rsync These are my rsync notes. I also used to use rsnapshot, however I was unhappy with the performance of this application and moved to restic. The original rsnapshot notes have been rolled up and moved to the bottom of this page. Rsync Notes Main rsync command usage summary

SSH Notes

Anonymous (anonymous@undisclosed.example.com) — 2025-01-10T02:59:45+00:00

linux debian ssh ssh_notes SSH Notes SSH Login Message Acronyms and Definitions * MOTD = Message of the Day Login Messages * sudo vim /etc/issue.net Displays a message before the user begins login, I do not use this. * sudo vim /etc/ssh/sshd_config ensure the following option is set

Anonymous (anonymous@undisclosed.example.com) — 2026-01-25T13:50:25+00:00

Administration Welcome/Home Personal * Personal Thoughts and Beliefs (Private) * Localisations * KPTree Recipes * Home Sprinkler Setup Notes * KPTree - Home Desktop Setup Home Server Setup * Home Server Notes * My Home IT Setup * Network Setup * KVM Setup * VNC Server * fsck - file system check * Home Server Index Home Server Other VM Setups * Home Server other VMs Index * KPTree - Email Server Setup * KPTree Torrent VM Setup * KPTree - Home Desktop Setup * dokuwiki setup…

ntp

Anonymous (anonymous@undisclosed.example.com) — 2025-11-14T14:12:45+00:00

ntp I remember looking at this circa 2016 - 2021 and letting go at that time, crony had just been released and systemd was still relatively new at that time. systemd commands * sudo systemctl status systemd-timesyncd * The default configuration is shown in

Web Server setup

Anonymous (anonymous@undisclosed.example.com) — 2024-12-07T03:13:35+00:00

linux debian apache apache2 httpd web server php certbot letsencrypt nextcloud cloud vm virtual machine kvm proxy reverse proxy gid uid vipw vigr group id user id Web Server setup Basic Web Server setup on VM I am moving away from Ubuntu to Debian. I find the instruction for here are good to setup a basic web server Digitalocean's LAMP on Debian 11 and Computing for Geeks LAMP on Debian. Old, tl;dr; The main reference used is Unixmen - How To Install LAMP Stack On Ubuntu 16.04, for the bas…

VNC Server

Anonymous (anonymous@undisclosed.example.com) — 2025-05-20T04:48:08+00:00

linux server debian vnc setup vncserver tigervnc gnome xfce VNC Server This section is a bit of a mess and needs a clean up..... I want a simple server GUI VNC system. Sadly most the instructions on the net do not seem to meet my needs. * Install a GUI * A light desktop system, e.g. xfce * The x11 windows manager system

XFCE

Anonymous (anonymous@undisclosed.example.com) — 2025-01-03T09:33:51+00:00

linux xfce XFCE XFCE Plugins Many XFCE plugins are available via menu: setting : panel : items, from here panel items can be added and removed and configured. To see available XFCE4 packages in the Debian repository sudo apt-cache search xfce4*. XFCE Keystrokes

NFS

Anonymous (anonymous@undisclosed.example.com) — 2025-01-05T06:27:27+00:00

linux debian nfs fstab server NFS There are a lot of resources online for NFS (Network File System). Nevertheless I decided to place my notes here to help me with my configuration, as there are a number of nuances that such notes will potentially assist with in the future. Sadly a number of resources I use seem out of date, not updated and/or possible subject to disappearance.

VNC

Anonymous (anonymous@undisclosed.example.com) — 2025-07-05T10:36:50+00:00

linux docker vnc guacamole VNC I set up Guacamole using Install Guacamole on Docker – VNC, SSH, SFTP, and RDP like a Boss!. * keystroke in a Guacamole session opens and closes the Guacamole control panel. My docker-compose.yml --- services: # MariaDB - MySQL Database mariadb: container_name: guac_db image: linuxserver/mariadb:latest restart: always networks: # - proxy - guac security_opt: - no-new-privileges:true # ports: # …

dokuwiki setup notes

Anonymous (anonymous@undisclosed.example.com) — 2025-09-29T11:22:11+00:00

linux wiki dokuwiki server plugin markdown dokuwiki setup notes Also see notes on setting up Docker Dokuwiki container * Dokuwiki home page * Dokuwiki Installation instructions * Upgrading Dokuwiki * DokuWiki Manual * Docuwiki maintenance * How to backup DokuWiki? * How to move DokuWiki from one Server to another? dokuwiki backup Back-ups placed here: '/media/disk1/KarlData/Karl Data 2/dokuwiki_backups/' and named KPtreeWiki-backup_yyyy-mm-dd. e.g. sudo tar zcpfv '/media/…

NFTables IP Control

Anonymous (anonymous@undisclosed.example.com) — 2023-04-30T09:43:13+00:00

linux nft nftables nmap NFTables IP Control I primarily set this feature up to act as a form of parental control on my home internet access. Disable Range of IP addresses, with count-down timer The DHCP assigned addresses in the range 100 - 254 were to be disabled (dropped) in the evening. The addresses below 100 were assigned a specific IP address in the DHCP based upon MAC.

Linux Router Setup Notes - Index

Anonymous (anonymous@undisclosed.example.com) — 2025-03-08T09:30:05+00:00

Linux Router Setup Notes - Index router index Linux Router Setup Notes - IndexStart page next page

Flatpak

Anonymous (anonymous@undisclosed.example.com) — 2026-01-23T03:32:30+00:00

linux flatpak snap universal package Flatpak Flatpak is a universal Linux package management system, that is more agnostic than the Linux distributions package management systems. Flatpak currently only works with a desk top environment, it is not for servers. There are other universal package management systems available. One popular example is snap, however this is from Ubuntu and seems propriety in nature.

Linux CLI Commands

Anonymous (anonymous@undisclosed.example.com) — 2026-03-22T01:59:49+00:00

cli commands Linux CLI Commands Various Linux CLI (Command Line Interface) Commands with examples and grouped by type File System Find specific file types * Using ls: * ls -lhaF | grep ^l # list links * ls -lhaF | grep ^d # list directories * ls -lhaF | grep ^-

Web Browser Notes

Anonymous (anonymous@undisclosed.example.com) — 2025-03-03T02:09:03+00:00

web browser config Web Browser Notes The purpose of reloading web page(s) and bypass the cache is to get a fresh copy of possibly outdated or corrupted files currently stored in the disk cache. You can do this as the first attempt if a normal reload doesn't seem to be giving an up to date version of a website or if you otherwise experience issues with a website. We usually advice this in case of issues:

fsck - file system check

Anonymous (anonymous@undisclosed.example.com) — 2023-04-30T09:43:13+00:00

linux fsck format partition boot corrupt parted fsck - file system check Use fsck to check and repair a file system. The file system must be unmounted when being check and repaired to prevent corruption! Checking Root File System The root file system can not be unmounted and checked. Two possible options to check the system are:

Home Server Notes

Anonymous (anonymous@undisclosed.example.com) — 2026-01-25T05:14:50+00:00

linux server setup summary index Home Server Notes The main reason for these notes is a reference to assist me with maintaining my home server. This includes upgrading the existing or setting up a new server in the future. There are many reasons to setup a home server and many different options available. For me one of the big reasons is the tinkering and learning associated with such a set up. There are many other benefits. Perhaps also one of the largest negatives is also the time invested …

Calibre Server

Anonymous (anonymous@undisclosed.example.com) — 2023-04-30T09:43:13+00:00

linux calibre server ebook Calibre Server Calibre is a comprehensive book library package. I had the server running on my Ubuntu 14.04 system about 5 years ago. From memory the Calibre web interface was a bit unpolished, however some of my phone apps could access the library for easier book access.

Linux Firmware Notes

Anonymous (anonymous@undisclosed.example.com) — 2025-09-29T01:53:10+00:00

linux debian firmware linux_firmware non-free-firmware aspeed realtek Linux Firmware Notes Some issues with non-free firmware blobs on Debian ASpeed Technologies The sudo dmseg command shows the warning Possible missing firmware /lib/firmware/ast_dp501_fw.bin for module ast. This relates to the ASpeed BMS VGA graphics microcode. The simple solution seems to be be to install the non-free microcode blob using

Home Server Index

Anonymous (anonymous@undisclosed.example.com) — 2024-02-28T10:11:04+00:00

Home Server Index Home Server Other Index some CLI tools: * homebrew actual runs on Linux as package manager * fuzzy finder - fzf Prev Start page Next

samba

Anonymous (anonymous@undisclosed.example.com) — 2023-04-30T09:43:13+00:00

linux samba samba I have not look at samba much since I first attempted to set up my home sever circa 2011 on Fedora before I moved to Ubuntu. I stopped using Fedora as I had noob pain with Selinux, coupled with the short service life of Fedora, so I moved to Ubuntu, where I had a lot more success.