https://wiki.kptree.net/ 2026-09-18T23:35:37+00:00 https://wiki.kptree.net/ https://wiki.kptree.net/_media/wiki:dokuwiki.svg text/html 2025-05-22T08:07:33+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.kptree.net/linux_router:ubuntu?rev=1747901253&do=diff linux router router_configuration setup debian ubuntu snap snaps switch network Router Configuration, Switch & Server Setup Router Configuration [DRAFT] A router performs the following key features: * A gateway between different network areas * Restrict network traffic * Forward Network traffic * Track network traffic, allows traffic incoming only if response to out going (one way traffic) This is primary firewall action and primary security action! This is often confused with NAT… text/html 2026-04-26T08:16:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.kptree.net/linux_router:background?rev=1777191366&do=diff linux router 4g lte mobile Linux Router Background I have had the router hardware for about 7 years now, as of June 2023. It took me nearly 18 months to set up as primary home router on bare metal, with DNS and DHCP. I got Wireguard up and running a year ago. I have some basic monitoring software running, darkstat and glances. I have not bothered to setup VMs or containers, it all runs bare metal. I managed to use text/html 2025-10-14T05:59:15+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.kptree.net/linux_router:misc?rev=1760421555&do=diff linux router monitor links darkstat glances ntopng iftop nethogs Router Miscellaneous Monitoring There are a number of linux monitoring packages available. See these links for more examples see, 13 Linux Performance Monitoring Tools – Part 2, and 30 Linux System Monitoring Tools Every SysAdmin Should Know. Below are a few that I have tried and use. iftop iftop - display bandwidth usage on an interface by host Use text/html 2024-12-15T03:35:46+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.kptree.net/linux_router:dns_dhcp?rev=1734233746&do=diff linux router dns dhcp bind ip ipv6 radvd host dig nslookup DHCP / DNS Setup Outdated I have moved my DNS and DHCP servers to Docker, Docker-DNS Server. I am still using ISC_Bind9, but am now using ISC_Kea for DHCP as ISC_Bind is no longer supported as of 2022. tl;dr; Further to this I am not looking at backups for both these services on my local area network. Whilst these services worked reliably well, when ever I shutdown the the router with text/html 2026-06-21T00:26:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.kptree.net/linux_router:hardware?rev=1782001578&do=diff linux router hardware Router Hardware ikoolcore-r2-max (Dec 2024) The Supermicro SYS-E200-9B has stopped working. It posts bios, but will not boot further. I suspect hardware failure of some sort. The BMC failed a few years ago. I have ordered a replacement ikoolcore-r2-max. The replacement comes with 2.5Gb/s and 10GB/s NICs and a more modern and faster 8 core text/html 2026-01-31T11:03:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.kptree.net/linux_router:wifi?rev=1769857432&do=diff linux router wifi wifi_router access_point Wifi Router / Access Points I prefer to run higher quality wifi access points (AP) than the all in one type routers. My current router is X86 based running Linux Nftables on bare metal and Bind9 and Kea as well as some other services in Docker on a VM.