Search

Fulltext results:

NFTables Configuration

2 Hits, Last modified: 6 months ago

h attempts. As I only allow ssh locally on LAN or via VPN I drop all such incoming traffic. (Also proba... rsion of nft I have will not read in the elements via a nft -f command.) Some info on NAT with NFTable

DHCP / DNS Setup

1 Hits, Last modified: 10 months ago

on the internal network to be reached externally via NAT also to be reached by internal clients behind

Router Hardware

1 Hits, Last modified: 2 months ago

speed. (At the moment my internet connection is via VSDL and is limited to about 65Mb/s down and 16MB

ISP IPoE DHCP Setup Notes

1 Hits, Last modified: 12 months ago

202.7.254.238 (DHCP4 via 202.7.254.1) fe80

Router Miscellaneous

1 Hits, Last modified: 5 months ago

ect the LANs to the WAN (Wide/World Area Network) via a router. This was required to compensate for the

ISP PPPoE Network Setup

1 Hits, Last modified: 12 months ago

o1 ExecStartPre=/sbin/ip route add 192.168.5.0/24 via 192.168.5.1 dev eno1 </code> <fs smaller>A refer

Router VM

1 Hits, Last modified: 11 months ago

net ports) * Access to public internet modem, via 1 Ethernet port - **the WAN (Wide Area Network) c

TC - Traffic Control

1 Hits, Last modified: 12 months ago

package installs the tc command to control these via the command line.\\ Queuing controls how data is