Search
You can find the results of your search below.
Fulltext results:
- NFTables Configuration
- ip daddr <color red>$http_server</color> ct status dnat counter accept ++ | \\ + <color #202000/#F0F... ip daddr <color red>$mail_server</color> ct status dnat counter accept ++ | \\ + <color #202000/#F0F... FFF0F0>$vpn_ip4</color><color #000060/#F0F0FF> ct status dnat counter accept # required if VPN service is... NS resolves to IP address -ip daddr home_srv ct status dnat accept -ip daddr home_srv tcp dport {http,
- Router Miscellaneous
- Systemd common commands (start / stop / restart / status) (enable / disable for boot control) *To start ... do systemctl start bind9'' *To check networking status ''sudo systemctl status networking'' *List current Systemd operating units: ''sudo systemctl list-units... ifferent format information than ''sudo systemctl status networking'' *Links to info on the ip and ifcon
- NFTables IP Control
- counter accept ip daddr $http_server ct status dnat counter accept ip daddr $mail_server ct status dnat counter accept # iifname "he-ipv6" c... t with the current nftables configuration *''status'' to list current running status of nftables *''start'' to start nftables with the current configura
- ISP PPPoE Network Setup
- ''sudo systemctl stop bind9'' *''sudo systemctl status bind9'' *''sudo systemctl disable isc-dhcp-serv... temctl stop isc-dhcp-server'' *''sudo systemctl status isc-dhcp-server'' ====Set up PPPoE==== "chap-sec... mplete. To check log files use: ''sudo systemctl status pppoe'' or ''journalctl -u pppoe -b 0 -xe''; ''-b
- DHCP / DNS Setup
- 78::3/0 { }; }; </code> ++ * ''sudo systemctl status radvd.service'' * ++/lib/systemd/system/radvd
- ISP IPoE DHCP Setup Notes
- d would seem to be functional. The ''networkctl status eno1'' ++++-|<code>2: eno1