Search
You can find the results of your search below.
Fulltext results:
- Reverse Proxy Server
- config.yml</code> I have broken down the Traefik router dynamic configuration file, My config.yml into 2 ... figuration files. One for the http/https specific router configuration and the other for the tcp router configuration, I do not use any UDP router configurations to date. I placed these files in the sub-direct
- Docker Host
- r functionality. I use nftables as my main edge router / firewall on bare metal. I could probably run this on a VM within Proxmox, but the Router hardware is not especially powerful and at this t... reason for me to do so at this time. My current router has an Intel N3700 CPU, maximum 8GB ram, procured... ow to use, but still functions well as a sub gb/s router. I also run a VM with Docker containers for a ba
- Docker
- >//**A Docker host that is acting or running as a router, e.g. using Traefik, the following may be needed ... P address with other LAN addresses, including the router / gateway. Linux forwarding is required for Doc... rward''. It would also adversely affect my Linux router should I attempt to load docker on this machine. To make matters worse my Linux router is based on nftables which may not operate well w
- Nextcloud Container
- need to use ssl, as this is performed by the edge router I am using, Traefik. The Collabora server is http... as external ssl termination performed by upstream router, so the external addressing must be https. * ''
- turn server
- dresses can only be publicly accessed via a local router that performs NAT, subject to firewall rules. It... ccessible from the public network, subject to the router and firewall setup. In this case a TURN server wo
- Docker Deluge Image / Service
- this [[https://wiki.kptree.net/doku.php?id=linux_router:wireguard|Wireguard VPN access from WAN to LAN]]/