Search
You can find the results of your search below.
Fulltext results:
- BASH Customisation @home_server:home_server_setup:other_services
- rce-recreate' alias dcstop2='dcrun2 stop' alias dcrestart2='dcrun2 restart ' alias dcpull2='dcrun2 pull' alias startbasic='dcup2 $(cat /home/$BA_USERNAME/docker/scr... stop crowdsec-firewall-bouncer.service' alias csfbrestart='sudo systemctl restart crowdsec-firewall-bouncer.service' alias tailkern='sudo tail -f /var/log/kern.log'
- Docker nginx / php notes @docker_notes
- IGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart w
- Docker mailserver @docker_notes
- options, "Usage: /etc/init.d/postfix {start|stop|restart|reload|flush|check|abort|force-reload|status}" =... tps://www.cyberciti.biz/faq/linux-unix-start-stop-restart-postfix/|Start / Stop / Restart Postfix Mail Server]] *[[https://kerneltalks.com/linux/how-to-start-st... list the current defined modules * ''httpd -k restart'' to restart, also stop to kill, graceful to grac
- KPTree - Email Server Setup @home_server
- * To apply configuration changes ''sudo systemctl restart nfs-client.target'' * Mounting the nfs client... eshclam'' does not functions without error *Restart clamav ''sudo systemctl start clamav-daemon'', ho... y with configuration site specifics, as above) *Restart Everything, and Test the Server - check /var/log/... : fatal: no SASL authentication mechanisms]. Upon restarting dovecot and then postfix, this error went away
- Docker @docker_notes
- ata docker run -d -p 9443:9443 --name=portainer --restart=always \ -v /var/run/docker.sock:/var/run/doc... un -d -p 9001:9001 --name portainer_agent --restart=always \ -v /var/run/docker.sock:/var/run/docker.... NTAINER'' | Kill (SIGKILL) a container| |''docker restart CONTAINER'' | Graceful stop and restart a container| |''docker pause CONTAINER'' | Suspend a container| |'
- Web Server setup @home_server
- sudo a2dissite example.com.conf'' *Reload or restart apache2 to enable configuration changes: ''sudo systemctl reload apache2'' or ''sudo systemctl restart apache2'' *Test the web page by typing in th... configtest'' - After changes are made reload or restart apache2: ''sudo systemctl reload apache2'' or ''sudo systemctl restart apache2'' To further add to confusion it would s
- KPTree Torrent VM Setup @home_server
- pn.conf'' & ''sudo vim /etc/nftables.conf''. *Restart the respective services: ''sudo systemctl restart openvpn@privatvpn.service'' & ''sudo systemctl restart nftables'' *Remember the host IP address and end ... rver IP address ''bind-address = 192.168.1.19''. Restart mysql: ''sudo systemctl restart mysql'', check al
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- .charge.warning=60 default.battery.charge.restart=30 default.battery.runtime.low=420 default.battery.runtime.restart=180 </code> <code> upsd.conf ... #Set value LB (Low Battery Alarm) battery.charge.restart: 30 #Set value battery.charge.warning: ... e.low: 420 #Set value battery.runtime.restart: 180 #Set value battery.voltage: 27.30 ba
- Docker-Compose @docker_notes
- ker-compose down'' *''docker-compose stop|start|restart'' it is better to use down and up commands has th... ied on Traefik would not operate. A simple start/restart of Traefik always worked. Most of the other Docke... containers that relied upon Traefik needed to be restarted too. It was annoying and made me doubt that m... eload=/bin/kill -s HUP $MAINPID TimeoutStartSec=0 RestartSec=2 Restart=always # Note that StartLimit* opti
- Rsync @home_server:home_server_setup:other_services
- tl status rsync.service'' [status, start, stop, restart, reload, disable, enable] ++++ ====Notes on Comp... h/known_hosts</code> Make these changes active by restarting the ssh services via the command ''sudo service ssh restart''. With ssh properly configured, a command like ... use ''crontab -e'' and enter the following (Also, restart cron with ''sudo service cron restart'' to make s
- DHCP / DNS Setup @linux_router
- ore updating the the DNS service, "sudo systemctl restart bind9". A common technique is to use the date fol... ation file can be tested with: ''sudo dhcpd -t'' Restart the DHCP and DNS servers to update for latest configurations changes. DNS: ''sudo systemctl restart bind9'' and DHCP: ''sudo systemctl restart isc-dhcp-server''.\\ \\ To see active leases use command ''sud
- Conky @home_server:home_server_setup:other_services
- t a 16 core processor running Manjaro -- You can restart conky by running -- killall -SIGUSR1 conky ... ort a 8 core processer running Ubuntu # # You can restart conky by running # killall -SIGUSR1 conky #... t a 16 core processor running Manjaro -- You can restart Conky by running -- killall -SIGUSR1 conky ... t a 16 core processor running Manjaro # # You can restart conky by running # killall -SIGUSR1 conky #
- Router Miscellaneous @linux_router
- ExecStart=/home/baumkp/.local/bin/glances -w -t 2 Restart=on-abort [Install] WantedBy=multi-user.target <... es=docker.service After=docker.service [Service] Restart=always ExecStart=/usr/bin/docker start -a algo Ex... ip a'' *Systemd common commands (start / stop / restart / status) (enable / disable for boot control) *
- Calibre @docker_notes
- ports: - 8088:8080 - 8089:8081 restart: unless-stopped networks: - proxy netw... e_library:/books ports: - 8087:8083 restart: unless-stopped networks: - proxy netw
- KPTree - MSWindows Setup @home_server
- afe * Sometime this is enough to allow a normal restart * Check add-ins and stop start-up Some other ... r to see if a frozen process is the problem.\\ *Restart the computer. ======Autodesk====== =====AutoCAD