Search
You can find the results of your search below.
Fulltext results:
- NFTables Configuration
- routing.</color>\\ <tab6><color blue> # open ports refers to ports to open for input to this machine.</color>\\ <tab6><color blue> # ssh is port 22 for... ocol.</color>\\ <tab6>\\ <tab6> set tcp_open_ports { ++ | \\ + <color #202000/#F0F0E0> This creates ... <tab6> }\\ <tab6> \\ <tab6> set udp_open_ports { ++ | \\ + <color #202000/#F0F0E0> This creates
- Router Miscellaneous
- -ipad/|VPN from your iPhone]] ---- =====Reserved Ports and IPv4 Reserved Addresses===== It took me some... hat nft uses the /etc/services database for named ports definition. Some ports of interest: <code> Name Port Protocols Description ftp-data 20 {... red_hat_enterprise_linux/4/html/security_guide/ch-ports|Appendix C. Common Ports]] * [[https://linuxhan
- NFTables IP Control
- e forward and nat chains refer to routing. # open ports refers to ports to open for input to this machine. # ssh is port 22 for SSH on both TCP and UDP, but we ... e are not using yet. # set tcp_open_ports { # type inet_service; flags interval; # ... # https # } # set udp_open_ports { # type inet_service; flags interval; #
- Router VM
- * Network configuration (of 4 x 1 GB/s ethernet ports) * Access to public internet modem, via 1 Eth... bridge network setup on the remaining 3 Ethernet ports as a LAN (Local Area Network). The bridge network... allows connections of multiple physical Ethernet ports to a bridge interface device, with the bridge eff... ng as a network switch for the connected physical ports. (On my home server I have 4 x 1GB/s Ethernet po
- Debian / Ubuntu Network Setup
- . The WAN port will be setup on NIC1 with the LAN ports 1-3 will be on bridged NIC2-4. Ensure the bridge... net auto br0 iface br0 inet static bridge_ports eno2 eno3 eno4 address 192.168.1.1/24 dns... ing 3 NICs are setup in bridge mode as router LAN ports. When setup in bridge mode the 3 ports effectively act as a switch with any able to access the router LA
- Linux Router Background
- TP-Link VDSL modem router with 4 100Mbps ethernet ports and 2 VoIP port. One ethernet port was set up as ... outer was a N3700 router with 4 1000Mbps ethernet ports running Linux Debian. -The speed tester was run
- DHCP / DNS Setup
- SchedulingPolicy=idle # Allow for binding to low ports and doing raw network access CapabilityBoundingSe
- Router Hardware
- wer (~8 - 10W), small size. They come with 2 SATA ports and mini PCI-E slots. By the time you fit them ou
- IPTables Configuration
- e WAN -A POSTROUTING -o ppp1 -j MASQUERADE # WAN Ports DNAT to LAN -A PREROUTING -p tcp -m tcp -i ppp1 -