Search
You can find the results of your search below.
Fulltext results:
- NFTables Configuration @linux_router
- er address</color>\\ <tab3>define <color red>vpn_port = 51914</color><color blue> #definition of wireguard server port</color>\\ <tab3><color #000060/#F0F0FF>#define</... achine.</color>\\ <tab6><color blue> # ssh is port 22 for SSH on both TCP and UDP, but we only use TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP a
- Docker nginx / php notes @docker_notes
- E_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was b
- NFTables IP Control @linux_router
- ports to open for input to this machine. # ssh is port 22 for SSH on both TCP and UDP, but we only use TCP! # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, # but we only use UDP! # domain is port 53 for DNS requests on TCP & UDP. # openvnp is po
- Docker mailserver @docker_notes
- s like ''less'' will not work properly unless ''export TERM=rxvt'' is used. <fc #ff0000>Hmmm... unimpres... 5.240.0.0), supposedly recent version of mysql support this notation ([[https://stackoverflow.com/questi... sk (right-hand side). Postfix has a built-in transport service called “virtual” that can receive the ema... rvice| <code>[Unit] Description=Postfix Mail Transport Agent Conflicts=sendmail.service exim4.service Co
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- 0G,fsname=mergerfs 0 0 #/media/Disk1 /export/Disk1 bind bind 0 0 #/media/Disk2 /export/Disk2 bind bind 0 0 /media/Disk4 /export/Disk4 bind bind 0 0 /home/shared /export/shared bind bind 0 0 </code> Direct
- NFS @home_server:home_server_setup:other_services
- eate share directories on host ''sudo mkdir -p /export/storage'' (-p also creates higher level directori... rol list for filesystems which may be exported /export 192.168.1.0/24(insecure,no_subtree_check,rw,nohide,fsid=0) #/export/Disk1 192.168.1.0/24(insecure,no_subtree_check,rw,nohide) #/export/Disk2 192.168.1.0/24(insecure,no_subtree_check,r
- KPTree - Email Server Setup @home_server
- :(default) we do not need to change the standard port number used * NEED_GSSD=no :(default) we do... ''sudo mount -t nfs -o rw,vers=4 192.168.1.10:/export/storage /mnt/storage'' to mount just the specific... ''sudo mount -t nfs -o rw,vers=4 192.168.1.10:/export /mnt'' to mount all the defined exports. The moun... ents: sudo vim /etc/fstab * ''192.168.1.10:/export /mnt nfs4 bg 0 0'' this will mount all the driv
- Nextcloud Container @docker_notes
- /nextcloud|Nextcloud]] image does not directly support cron. So it needs to be added, for the nextcloud... artion warns about missing php imagemagick-svg support I also added the Apline package to the updated im... lem without and easy solution. Nextcloud main support looks Apache web server based with little Nginx support and even less Traefik support. Some resources rel
- Reverse Proxy Server @docker_notes
- . =====Entrypoints===== The Standard entry point port normally defined are HTTP (port 80 and perhaps 8080) and HTTPS (port 443). If you are using other services then additional entry point... eed to be defined, as required for each service / port. Mail servers are an example that requires use o
- IPTables Configuration @linux_router
- t be the case. As of year ending 2019 general support and functionality of NFTables is much improved. That being said overall information and support for IPTables is more comprehensive. Application ... NAT to LAN -A PREROUTING -p tcp -m tcp -i ppp1 --dport 80 -j DNAT --to-destination 192.168.1.15:80 -A PREROUTING -p tcp -m tcp -i ppp1 --dport 443 -j DNAT --to-destination 192.168.1.15:443 -A
- KPTree Torrent VM Setup @home_server
- - How to install Deluge Headless]]. The Deluge support page is also a root source of knowledge [[https:/... Ubuntu CLI setup: * [[https://privatevpn.com/support/getting-started/linux/linux/openvpn-cli|OpenVPN C... s at their Knowledgebase [[https://btguard.com/support/index.php?/Knowledgebase/Article/View/20/0/how-ca... that these units look to be no longer sold and support is limited, perhaps already end of life. Earlier
- Docker @docker_notes
- rtainer/portainer-ce:latest </code> Notes: *The port 8000 (-p 8000:8000) is not normally required on c... 0>//**Further to this Kea dhcp control agent uses port 8000 as default.**//</fc> *Some browsers give s... ne to be seen else were via the network. Default port seems to be 9001. * First stop the agent contai... ew container and set a name| |''docker run -p HOSTPORT:CONTAINERPORT IMAGE'' | Start a new container wit
- SSH Notes @home_server:home_server_setup:other_services
- /etc/default/locale ] && . /etc/default/locale export LANG cores=$(grep -c ^processor /proc/cpuinfo 2>/... landscape-systeminfo| <code> #!/usr/bin/python3 import sys, os try: if os.path.dirname(os.path.absp... ") else: from landscape.lib.warning import hide_warnings hide_warnings() from twisted.internet import reactor from landscape.sysinfo.deployment im
- Web Server setup @home_server
- ration files to "example.org-http.conf" for http, port 80 and example.org-https.conf for https, port 443 services. ====Hostname==== *Systemd seems to use th... /etc/apache2/sites-available/'' - main http (port 80) setup file: ''sudo vim /etc/apache2/sites-available/example.org-http.conf'' - main https (port 443) setup file: ''sudo vim /etc/apache2/sites-av
- Router Miscellaneous @linux_router
- ed] docker logs algo [view container log] docker port algo After running "docker exec -it algo bash", ... rds as noted below. **IANA Service Name and Transport Protocol Port online [[https://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml|Number R