Search
You can find the results of your search below.
Fulltext results:
- DHCP / DNS Setup
- dily available, Kill-9 Ubuntu 16.04 based Router, Part 2 - DHCP| does not seem to be saved on [[https://... /killtacknine.com/building-an-ubuntu-16-04-router-part-5-dns/|Part 5 - DNS]] is. (As are [[https://web.archive.org/web/20190410005152/https://killtacknine.com/building-an-ubuntu-16-04-router-part-6-remote-access/|Building an Ubuntu 16.04 Router
- Router Miscellaneous
- ng-tools/|13 Linux Performance Monitoring Tools – Part 2]], and [[https://www.cyberciti.biz/tips/top-lin... r plays around with iptables. I do not like this, particularly on my main router machine that I use on b... /killtacknine.com/building-an-ubuntu-16-04-router-part-1-network-interfaces/|Part 1]] Sadly this link is no loner up and has been spammed! *Ubuntu forums [[
- Router Basic Debian Server Setup
- tion.) *I just use standard set-up for one main partition, which basically gives one large data partition using all the disk space, save that allowed for the SWAP partition. The SWAP partition is automatically sized based upon detected memory. (I have never been one for
- Router Hardware
- Hz. Also in many cases the NIC hardware is older, particularly on the cheaper units, so care must be tak... ver loader also had a problem with existing drive partitions, so I needed to manually remove all existing partitions using fdisk, from 18.04 install terminal.
- Linux Router Background
- given to others so I could not connect. I suspect part of the problem was the slow pppoe connect. My ISP... n the References (Related Links) section and were particularly relevant are also repeated in the section
- Debian / Ubuntu Network Setup
- ays as attempts are made to find network devices, particularly any not used. These delays are necessary