Search
You can find the results of your search below.
Fulltext results:
- Debian / Ubuntu Network Setup
- # Then LAN networks are eno2 eno3 eno4 in bridged mode br1 # on the 192.168.1.1 subnet auto br0 if... with the ISP it 2 modems were attempted in bridge mode; a Netgear DM200 and Draytek Vigor130. The premiu... em address is "http://192.168.5.1" when in bridge mode. The network must start-up the WAN NIC to allow ... ured.** The remaining 3 NICs are setup in bridge mode as router LAN ports. When setup in bridge mode th
- Linux Router Background
- Debian. -The speed tester was run in automatic mode, it seemed to find the local test point -The sp
- DHCP / DNS Setup
- eload the configuration ====Setting Bind9 to IPv4 Mode==== ''sudo vim /etc/default/bind9'' or ''sudo vim
- ISP IPoE DHCP Setup Notes
- QDisc: mq IPv6 Address Generation Mode: eui64 Queue Length (Tx/Rx): 8/8
- IPv6 Setup Notes
- *''modprobe ipv6'' *'' ip tunnel add he-ipv6 mode sit remote 216.218.142.50 local 112.213.222.19 tt
- ISP PPPoE Network Setup
- no limit maxfail 0 # Load rp-ppoe.so for kernel mode interface naming compatibility # (ie, ppp0, ppp1)
- Router VM
- on** * modem is VDSL based, set into bridge mode to allow connection to control using this machine