Search
You can find the results of your search below.
Fulltext results:
- KVM Setup
- tem -o this-vm -n that-vm %%--%%auto-clone''. To list all defined virtual machines ''virsh list %%--%%all''. Which will make a copy of this-vm, named that-v... server. Simply changing the machine value to one listed from kvm-spice in <fc #6495ed><type arch="x86_6... ks on VMs that are shut down</fc> -''sudo virsh list --all'' to list all KVM virtual machines. -''%%
- BASH Customisation @home_server:home_server_setup:other_services
- BASH colour configuration uses a blue colour for listing directories (ls) which is difficult to read on... gnore hidden files) * ''-l'' : use a long listing format * ''-L'', ''%%--dereference%%'' ... show index number of each file * ''-R'' : list sub-directories recursively * ''-S'' : sor... e:| <code bash> # This is my current / up-to-date list of bash aliases. # This is the exact same file th
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- and scripts====== =====dmesg==== ''sudo dmesg'' lists the OS boot messages between grub and os up. ===... status) (enable / disable for boot control) *List current Systemd operating units: ''sudo systemctl list-units | grep %%'*'%%''. Change or remove the grep... ll package'' to install a package *''%%sudo apt list --installed%%'' to list installed packages, use g
- IPMI CLI Tools @home_server:home_server_setup:other_services
- ''ipmitool -h'' * Chassis power commands: * List current power status: ''ipmitool -I lanplus -H 19... 8.1.42 -U baumkp -a chassis power status'' * List available chassis commands:''sudo ipmitool -I open chassis'' * List chassis policy options ''ipmitool -I lanplus -H 192.168.1.42 -U baumkp chassis policy'' * Lists current chassis policy state: ''ipmitool -I lanp
- Rsync @home_server:home_server_setup:other_services
- o access hosts allow = 192.168.1.5 hosts deny = * list = true uid = root gid = root read only = false # ... mply type ''rsync'' at terminal to see a complete list ^Flag Short^ Flag Long ^Description^ |''-z''| ''%... ould also create a file that contains the exclude list ''tmp'' and ''src''. This would look like: <code>sudo rsync -azv --exclude-from 'exclude-list.txt' pi@RedRPi:/home/pi/ /mnt/backup/rsync-test6<
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- c.html|Voltronic Power UPS Protocol]], it is also list under the Voltronic Power section, (various)USB o... stools.org/stable-hcl.html|Hardware compatibility list]]. =====NUT Configuration Files===== NUT can be ... 180 </code> <code> upsd.conf LISTEN 192.168.x.x #IP address of NUT server LISTEN 127.0.0.1 3493 #IPv4 NUT port LISTEN ::1
- Network Setup
- t-autostart br0 The qemu defined networks can be listed with the command: ''virsh net-list --all'' You can list networks with ''networkctl list'' =====Some helpful commands and comments:===== *To see bridge statu
- Linux Block Device Notes @home_server:home_server_setup:other_services
- ic tools==== *''ls -l /dev/disk/by-uuid/'' will list the disks with UUIDs *''lsblk'' to list partitions (or list block devices) *''lsblk -f'' or ''blkid'' to list the UUIDs *''sudo blkid'' will list data blocks
- fsck - file system check
- tune2fs -l /dev/sdX'' ++++Home Server Index|<pagelist&header> *[[home_server:home_server_setup:summary]... er:home_server_setup:other_services:index]] </pagelist>++++ ====Find Information on Hard disks==== The... is ‘’tune2fs -l /dev/sda2’’. The ‘’df’’ command lists current mounted disks. ---- <- home_server:ho... information: *WWN is a unique identifier ode list on the drive *HCTL lists the drive sata port
- samba @home_server:home_server_setup:other_services
- 5) manual page in order to understand the options listed # here. Samba has a huge number of configurable... requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ... these users to have write rights in it ; write list = root, @lpadmin [home] writeable = yes path =... check commands: * ''smbclient -L 192.168.1.10'' list the available shares on the host IP * ''pdbedit
- Home Server Index @home_server:home_server_setup:other_services
- ===Home Server Index=== <pagelist&header> *[[home_server:home_server_setup:summary]] *[[home_server:home... [home_server:home_server_setup:disk_check]] </pagelist> ===Home Server Other Index=== <pagelist&header> *[[home_server:home_server_setup:other_services:ind... ver:home_server_setup:other_services:misc]] </pagelist> some CLI tools: * homebrew actual runs on Li
- NFS @home_server:home_server_setup:other_services
- equired <code> # /etc/exports: the access control list for filesystems which may be exported /export ... mount Check status of clients: *''findmnt'' to list file system in tree format or ''findmnt -l'' in flat list. To allow automatic boot of nfs clients: ''sudo
- systemd Stuff @home_server:home_server_setup:other_services
- -1'' to see last boot entries. *''journalctl --list-boots'' to list all available journaled boots. *''sudo journalctl -u pppoe'', use u flag to see speci... rint basic time date only on cli\\ ''timedatectl list-timezones'' to set available time zones\\ ''sudo
- Time Date Related Setup @home_server:home_server_setup:other_services
- *''timedatectl'' and ''timedatectl status'' to list current system time date information. *''timedatectl list-timezones'' to list available time zones in timedatectl. *''sudo timedatectl set-timezone Australia/P
- My Home IT Setup
- be sure, to be sure. ++++Home Server Index|<pagelist&header> *[[home_server:home_server_setup:summary]... er:home_server_setup:other_services:index]] </pagelist>++++ <- home_server:home_server_setup:summary|Pr