Search
You can find the results of your search below.
Fulltext results:
- NFTables Configuration @linux_router
- m device label</color>\\ <tab3>define <color red>lan = br0</color><color blue> #definition of lan device label</color>\\ <tab3>define <color red>lan_ip4 = 192.168.1.0/24</color><color blue> #definition of lan IPV4 range</color>\\ <tab3>define <color red>rout
- IPMI CLI Tools @home_server:home_server_setup:other_services
- h the machine locally. This is called Serial Over Lan (SOL) and is available in IPMI v2.0 as a standard... v1.5 - Ability to send IPMI messages to BMC over LAN, LAN alerting. No SOL as part of the standard's specification but some vendor specific SOL implementations. *IPMI v2.0 - Serial Over LAN enabling console redirection, access control, enh
- KPTree Torrent VM Setup @home_server
- s.conf script| <code> #!/usr/sbin/nft -f define lan = ens3 define tun = tun0 # Clean out the curr... w IP addresses of VPN only for outgoing packet on lan #PrivatVPN Addresses (Host Addresses) oifname $lan ip daddr 27.50.73.55 counter accept #Host: au-mel.pvdata.host oifname $lan ip daddr 46.102.153.131 counter accept #Host:
- Network Setup @home_server:home_server_setup
- NIC connectors are setup as follows: <code> IPMI_LAN USB2-1 USB3-1 LAN3(eth2) LAN4(eth3) USB2-0 USB3-0 LAN1(eth0) LAN2(eth1) VGA </code> Edit the network configuration file: '
- Router Hardware @linux_router
- l Pentium N3700 system with 4 x Intel i210-AT GbE LAN. I got with maximum 8GB RAM and 120GB mSata HD. ... l Pentium N3700 system with 4 x Intel i210-AT GbE LAN, from [[https://mitxpc.com/products/sys-e200-9b|M... d power slightly lower than the J1900. (The Intel LAN controllers are also the more modern ones). This unit also comes with a dedicated IPMI LAN Port, allowing full remote KVM operation on the n
- Debian / Ubuntu Network Setup @linux_router
- setup to look like a router with 1 WAN port and 3 LAN port. The WAN port will be setup on NIC1 with the LAN ports 1-3 will be on bridged NIC2-4. Ensure the ... inet static address 192.168.5.2/24 # Then LAN networks are eno2 eno3 eno4 in bridged mode br1 ... Netplan. The NIC back panel layout: <code> IPMI_LAN DisplayPort USB2-1 USB3-1 LAN3(eth2) LA
- NFTables IP Control @linux_router
- define wan = ppp1 define modem = eno1 define lan = br0 define router_ip4 = 192.168.1.1 define ht... f lo counter accept # accept input from LAN iifname $lan counter accept # By port is a pain in the arse! # iifname $lan tcp dport { ssh, domain, 667, 953 } counter accep
- Formatting Syntax @wiki
- == [[doku>DokuWiki]] supports some simple markup language, which tries to make the datafiles to be as ... (for all users), put the following line in ''conf/lang/en/lang.php'' (more details at [[doku>localization#changing_some_localized_texts_and_strings_in_your_installation|localization]]): <code - conf/lang/en/lang.php> <?php /** * Customization of the e
- Docker nginx / php notes @docker_notes
- an older module add in for Python, and also other languages. Probably not relevant unless you intend to... ;user_ini.cache_ttl = 300 ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; ; Enable the PHP scripting language engine under Apache. ; https://php.net/engin... Lite 3.26+) ; When the defensive flag is enabled, language features that allow ordinary ; SQL to delibe
- IPMI Console Setup @home_server:home_server_setup:other_services
- functions if the ipmitool command, ''ipmitool -I lanplus -H 192.168.1.40 -U baumkp -f /etc/ipmitool so... elects IPMI interface to use; options seem to be: lan for IPMI 1.5 and lanplus for IPMI 2.0. (All my interfaces are IPMI 2.0) * -H : remote server address... the following command to find out, ''ipmitool -I lanplus -H 192.168.1.40 -U baumkp -f /etc/ipmitool so
- Web Server setup @home_server
- roup and User IDs across Virtual Machines on Same LAN===== Unfortunately, Havetheknowhow.com does not ... ual machines (VMs), each with a separate distinct LAN IP address. However there is only one WAN static ... s to https://sub1.example.com to a separate local LAN apache server, hence the reference to the local LAN address: https://192.168.1.18. (Does not seem to f
- DHCP / DNS Setup @linux_router
- shutdown the the router with DNS/DHCP servers my LAN would stop working. Hence the need for back-up DN... and 3 are missing only.)++ Another reference is Lani's Weblog - Make your [[https://lani78.com/2012/07/23/make-your-dhcp-server-dynamically-update-your-dn... IP address... A 192.168.1.12 ; This is the LAN address of the html server ;
- IPTables Configuration @linux_router
- ING ACCEPT [0:0] # eno1 is WAN interface, br1 is LAN interface (bridged eno2 - eno4), # ppp1 is the P... OUTING -o ppp1 -j MASQUERADE # WAN Ports DNAT to LAN -A PREROUTING -p tcp -m tcp -i ppp1 --dport 80 -j... t-with icmp-port-unreachable # DNS - accept from LAN -A INPUT -i br1 -p tcp --dport 53 -j ACCEPT -A IN... -p udp --dport 53 -j ACCEPT # SSH - accept from LAN -A INPUT -i br1 -p tcp --dport 22 -j ACCEPT # DH
- Docker Deluge Image / Service @docker_notes
- and wonder why things don't work, lol the English language sucks. ++++ Reference: *[[https://github... N to gain remote secure private access to my home LAN from the WAN (internet). //This is where I descri... router:wireguard|Wireguard VPN access from WAN to LAN]]//. - VPN to anonymize my public internet acce... '' under under output chain: *''oifname $lan ip daddr 103.231.89.219 counter accept #Host:
- KPTree - MSWindows Setup @home_server
- A4 paper cassettes must be setup as portrait not landscape. But should not be problem for bubble jet p... with selecting Australian as the primary English langage that seems to sometime also select the UK key... follows. The simple solution is to remove the UK language setting and if necessary add the US one. The... the keyboard layout can be independantly set. The language can be adjusted in the " region and language