Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- NFTables Configuration
- m device label</color>\\ <tab3>define <color red>lan = br0</color><color blue> #definition of lan device label</color>\\ <tab3>define <color red>lan_ip4 = 192.168.1.0/24</color><color blue> #definition of lan IPV4 range</color>\\ <tab3>define <color red>rout
- Router Hardware
- l Pentium N3700 system with 4 x Intel i210-AT GbE LAN. I got with maximum 8GB RAM and 120GB mSata HD. ... l Pentium N3700 system with 4 x Intel i210-AT GbE LAN, from [[https://mitxpc.com/products/sys-e200-9b|M... d power slightly lower than the J1900. (The Intel LAN controllers are also the more modern ones). This unit also comes with a dedicated IPMI LAN Port, allowing full remote KVM operation on the n
- NFTables IP Control
- define wan = ppp1 define modem = eno1 define lan = br0 define router_ip4 = 192.168.1.1 define ht... f lo counter accept # accept input from LAN iifname $lan counter accept # By port is a pain in the arse! # iifname $lan tcp dport { ssh, domain, 667, 953 } counter accep
- Debian / Ubuntu Network Setup
- setup to look like a router with 1 WAN port and 3 LAN port. The WAN port will be setup on NIC1 with the LAN ports 1-3 will be on bridged NIC2-4. Ensure the ... inet static address 192.168.5.2/24 # Then LAN networks are eno2 eno3 eno4 in bridged mode br1 ... Netplan. The NIC back panel layout: <code> IPMI_LAN DisplayPort USB2-1 USB3-1 LAN3(eth2) LA
- IPTables Configuration
- ING ACCEPT [0:0] # eno1 is WAN interface, br1 is LAN interface (bridged eno2 - eno4), # ppp1 is the P... OUTING -o ppp1 -j MASQUERADE # WAN Ports DNAT to LAN -A PREROUTING -p tcp -m tcp -i ppp1 --dport 80 -j... t-with icmp-port-unreachable # DNS - accept from LAN -A INPUT -i br1 -p tcp --dport 53 -j ACCEPT -A IN... -p udp --dport 53 -j ACCEPT # SSH - accept from LAN -A INPUT -i br1 -p tcp --dport 22 -j ACCEPT # DH
- DHCP / DNS Setup
- shutdown the the router with DNS/DHCP servers my LAN would stop working. Hence the need for back-up DN... IP address... A 192.168.1.12 ; This is the LAN address of the html server ;... re the name. </code>++++ **Note:** //To allow all LAN traffic to correctly flow to the html server and ... for internal services that can not be reached off LAN. I am not sure how split DNS addresses the use o
- Router VM
- work setup on the remaining 3 Ethernet ports as a LAN (Local Area Network). The bridge network setup ha... on VMs and container system to obtain host system LAN and WAN access. * ssh (for remote CLI access) ... public interface on certain IP addresses * Main LAN (Local Area Network) DNS/DHCP), these services wo
- Linux Router Background
- n alternative. All the services still work on my LAN except the email server. (The email server does actually operate on my LAN but it pretty pointless without access to externa
- Router Miscellaneous
- e some security benefits by obscuring the private LAN addresses from the public WAN. IPv6 does not use... nect to a physical network and even be assigned a LAN IP address. Bonding allows physical networking de
- Router Basic Debian Server Setup
- some the of keypoints: *I set-up Ubuntu to use LAN port 2, as I want to use LAN port 1 as the Router WAN port. *I do not encrypt the home directory. (S
- ISP IPoE DHCP Setup Notes
- ence is shared by the IPoE WAN link and the modem LAN web page link. My modem is setup at 192.168.5.1.
- IPv6 Setup Notes
- 0/accessing-the-dnatted-webserver-from-inside-the-lan *https://unix.stackexchange.com/questions/28208
- TC - Traffic Control
- ible to control how much traffic is received on a LAN by dropping packets that arrive at a router befor