Search
You can find the results of your search below.
Fulltext results:
- KPTree Torrent VM Setup
- s.conf script| <code> #!/usr/sbin/nft -f define lan = ens3 define tun = tun0 # Clean out the curr... w IP addresses of VPN only for outgoing packet on lan #PrivatVPN Addresses (Host Addresses) oifname $lan ip daddr 27.50.73.55 counter accept #Host: au-mel.pvdata.host oifname $lan ip daddr 46.102.153.131 counter accept #Host:
- IPMI CLI Tools @home_server:home_server_setup:other_services
- h the machine locally. This is called Serial Over Lan (SOL) and is available in IPMI v2.0 as a standard... v1.5 - Ability to send IPMI messages to BMC over LAN, LAN alerting. No SOL as part of the standard's specification but some vendor specific SOL implementations. *IPMI v2.0 - Serial Over LAN enabling console redirection, access control, enh
- Web Server setup
- roup and User IDs across Virtual Machines on Same LAN===== Unfortunately, Havetheknowhow.com does not ... ual machines (VMs), each with a separate distinct LAN IP address. However there is only one WAN static ... s to https://sub1.example.com to a separate local LAN apache server, hence the reference to the local LAN address: https://192.168.1.18. (Does not seem to f
- Network Setup @home_server:home_server_setup
- NIC connectors are setup as follows: <code> IPMI_LAN USB2-1 USB3-1 LAN3(eth2) LAN4(eth3) USB2-0 USB3-0 LAN1(eth0) LAN2(eth1) VGA </code> Edit the network configuration file: '
- Calibre Server @home_server:home_server_setup:other_services
- ''http://your_server_ip:8080'' in a browser on my LAN. Next setup the systemd service as follows sudo ... guard running to allow secure remote access to my LAN I can not be bothered trying to put my Calibre li... re on-line server, as it is only accessible on my LAN. If some one gains unauthorised access to my LAN, their access to my Calibre Library is the least of m
- IPMI Console Setup @home_server:home_server_setup:other_services
- elects IPMI interface to use; options seem to be: lan for IPMI 1.5 and lanplus for IPMI 2.0. (All my in... elects IPMI interface to use; options seem to be: lan for IPMI 1.5 and lanplus for IPMI 2.0. (All my in... sol : Configure and connect IPMIv2.0 Serial-over-LAN * activate : to activate the terminal connectio... Hence it should only be operated in a restricted LAN, where only strict secure outside control is poss
- dokuwiki setup notes
- l dns setup==== The local dns points to the local lan address that assists with hairpin nat on ipv4. No
- samba @home_server:home_server_setup:other_services
- orm of security it to limit external access to my lan, hence samba security is low. More focused on eas
- Webmin @home_server:home_server_setup:other_services
- Fortunately as I only wish to run Webmin locally (LAN), not facing the public internet (WAN), I can sti