Search
You can find the results of your search below.
Fulltext results:
- Debian / Ubuntu Network Setup @linux_router
- {{tag>linux Debian Ubuntu router network netplan interface vlan ipv6 ip}} ======Debian / Ubuntu Network Setup====== ====Debian / Ubuntu Network - Inte... this interface Setup. It can be setup to use netplan inface.\\ Ubuntu (as of version 14.04) defaults ... setup to look like a router with 1 WAN port and 3 LAN port. The WAN port will be setup on NIC1 with the
- NFTables Configuration @linux_router
- m device label</color>\\ <tab3>define <color red>lan = br0</color><color blue> #definition of lan device label</color>\\ <tab3>define <color red>lan_ip4 = 192.168.1.0/24</color><color blue> #definition of lan IPV4 range</color>\\ <tab3>define <color red>rout
- Network Setup @home_server:home_server_setup
- {{tag>network interface netplan nic setup loopback eth ethernet bridge bond networkd linux debian setup... fix IP address to the eth0 address.++++ ++++Netplan Old Setup with 802.3ad bonding, too complex do no... NIC connectors are setup as follows: <code> IPMI_LAN USB2-1 USB3-1 LAN3(eth2) LAN4(eth3) USB2-0 USB3-0 LAN1(eth0) LAN2(eth1) VGA </code> Ed
- Docker Deluge Image / Service @docker_notes
- container openvpn "docker compose" wireguard macvlan nftables}} ======Docker Deluge Image / Service===... N to gain remote secure private access to my home LAN from the WAN (internet). //This is where I descri... router:wireguard|Wireguard VPN access from WAN to LAN]]//. - VPN to anonymize my public internet acce... stopped and need to be reset! so now trying ++macvlan option|<code bash> docker network create -d macv
- Docker @docker_notes
- cate outside the local host IP address with other LAN addresses, including the router / gateway. Linu... br0 was the bridge interface for the VMs and also LAN access. The next problem was how to make this oc... if installed there, no separate network.) - MACVLAN - MACVLAN (without subVLAN) this create a new ip address on the host machine * <code bash>d
- Router Hardware @linux_router
- l Pentium N3700 system with 4 x Intel i210-AT GbE LAN. I got with maximum 8GB RAM and 120GB mSata HD. ... l Pentium N3700 system with 4 x Intel i210-AT GbE LAN, from [[https://mitxpc.com/products/sys-e200-9b|M... d power slightly lower than the J1900. (The Intel LAN controllers are also the more modern ones). This unit also comes with a dedicated IPMI LAN Port, allowing full remote KVM operation on the n
- IPMI CLI Tools @home_server:home_server_setup:other_services
- h the machine locally. This is called Serial Over Lan (SOL) and is available in IPMI v2.0 as a standard... v1.5 - Ability to send IPMI messages to BMC over LAN, LAN alerting. No SOL as part of the standard's specification but some vendor specific SOL implementations. *IPMI v2.0 - Serial Over LAN enabling console redirection, access control, enh
- DHCP / DNS Setup @linux_router
- shutdown the the router with DNS/DHCP servers my LAN would stop working. Hence the need for back-up DN... onitor for Kea and Bind9 called Stork. A future plan would be to review and replace ISC DHCP with Kea ... IP address... A 192.168.1.12 ; This is the LAN address of the html server ;... re the name. </code>++++ **Note:** //To allow all LAN traffic to correctly flow to the html server and
- Router Basic Debian Server Setup @linux_router
- u for the past many years I have grown use to netplan. This is not native on Debian Buster, so needs to be installed: ''sudo apt install netplan.io'' it basically just seems to work. One of th... some the of keypoints: *I set-up Ubuntu to use LAN port 2, as I want to use LAN port 1 as the Router WAN port. *I do not encrypt the home directory. (S
- IPMI Console Setup @home_server:home_server_setup:other_services
- elects IPMI interface to use; options seem to be: lan for IPMI 1.5 and lanplus for IPMI 2.0. (All my in... elects IPMI interface to use; options seem to be: lan for IPMI 1.5 and lanplus for IPMI 2.0. (All my in... sol : Configure and connect IPMIv2.0 Serial-over-LAN * activate : to activate the terminal connectio... Hence it should only be operated in a restricted LAN, where only strict secure outside control is poss
- Docker mailserver @docker_notes
- ptree.net''. This will only be accessible on the LAN. ====ISPmail Admin==== I will setup DNS and Traef... ptree.net''. This will only be accessible on the LAN. Admin user is mailserver with associated passwor... uting of STARTTLS. At least as of 2023-12-02. My LAN DNS points to the one common IP address for the m
- KPTree - Email Server Setup @home_server
- ocal area network. ++++I actually like to use netplan| * ''sudo apt install netplan.io'' * ''sudo mv /etc/network/interfaces /etc/network/interfaces.old'' * ''sudo /etc/netplan/network.yaml'' * <code>network: versio
- Router VM @linux_router
- work setup on the remaining 3 Ethernet ports as a LAN (Local Area Network). The bridge network setup ha... on VMs and container system to obtain host system LAN and WAN access. * ssh (for remote CLI access) ... public interface on certain IP addresses * Main LAN (Local Area Network) DNS/DHCP), these services wo
- Linux Router Background @linux_router
- n alternative. All the services still work on my LAN except the email server. (The email server does actually operate on my LAN but it pretty pointless without access to externa
- Router Miscellaneous @linux_router
- e some security benefits by obscuring the private LAN addresses from the public WAN. IPv6 does not use... nect to a physical network and even be assigned a LAN IP address. Bonding allows physical networking de