Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- NFTables Configuration @linux_router
- ed to forward packets: * ''sudo sysctl net.ipv4.ip_forward'' to check * ''sudo sysctl net.ipv4.ip_forward=1'' to set or =0 turn off * ''sudo sysctl ... F0E0> * Device definitions can be found using ''ip a'' \\ * IP address should also be able to be found using ''ip a''.\\ * Where services are on
- KPTree Torrent VM Setup @home_server
- gnificant problems, save for BTGuard changing the IP address of their servers on occasion without info... e domain ''.host''. * The PrivatVPN tunnel host IP address is different from the end IP address, unlike BTGuard which were the same. The host IP address must be used in the NFTables firewall to
- NFTables IP Control @linux_router
- {{tag>linux nft nftables nmap}} =====NFTables IP Control===== I primarily set this feature up to act ... my home internet access. ====Disable Range of IP addresses, with count-down timer==== The DHCP ass... The addresses below 100 were assigned a specific IP address in the DHCP based upon MAC. I added a ... } </code> In the forward chain the controllist IP set was dropped for all the source and destinatio
- Router Miscellaneous @linux_router
- a-docker-container-can-access-a-service-on-a-host-ip|Iptables rule-set so that a docker container]] can access a service on a host IP ====Docker Algo Setup & Basic Commands==== //**Th... y used commands and scripts:===== *Get external IP address ''wget http://ipinfo.io/ip -qO -'' *To check the current network hardware configuration ''i
- Docker @docker_notes
- ines could not communicate outside the local host IP address with other LAN addresses, including the r... r and can be checked with ''sudo sysctl net.ipv4.ip_forward''. It would also adversely affect my Lin... g nftables info: ++++nft list tables| <code>table ip nat</code> ++++ ++++nft list table ip nat| <code># Warning: table ip nat is managed by iptables-nft,
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- de update install remove crontab man apropos tldr ip tc systemctl journalctl}} ======Commonly used com... rrying about its fancier, more complex uses. =====IP===== The IP command notes. Call up information only: *''ip addr'' or ''ip a'' for short, shows the network IP a
- Docker Deluge Image / Service @docker_notes
- N usage, e.g. greater privacy and ability to have ip address based on different geographic location. =... d macvlan \ --subnet=192.168.1.0/24 \ --ip-range=192.168.1.95/30 \ --gateway=192.168.1.1... enp1s0 macnet1 </code>++ * In order to find the ip address of the vpn server I just ping the vpn acc... nder under output chain: *''oifname $lan ip daddr 103.231.89.219 counter accept #Host: au
- Web Server setup @home_server
- '' *Test the web page by typing in the local ip address of the apache2 server in a web browser T... '' =====HTTP & HTTPS Apache redirect to internal IP Virtual Machine & Related===== ====HTTP & HTTPS Apache Reverse Proxy to internal IP Virtual Machine==== The goal is to setup two (or... machines (VMs), each with a separate distinct LAN IP address. However there is only one WAN static Int
- Debian / Ubuntu Network Setup @linux_router
- Ubuntu router network netplan interface vlan ipv6 ip}} ======Debian / Ubuntu Network Setup====== ====... " To check available interfaces and names use: ''ip link'', or the more verbose ''ip a''. The units 4 main port will be setup to look like a router with... o eno1 eno1:0 iface eno1 inet dhcp # dhcp for IP/DHCP WAN (static? for PPPOE) # set up static ip
- IPMI CLI Tools @home_server:home_server_setup:other_services
- control unit and SOL will save you purchasing an IP KVM, both of which would be quite expensive for t... OS shutdown, (if supported). * Retrieving ILOM IP address with ipmitool: ''sudo ipmitool lan print'... lus for IPMI 2.0. * -H : remote server address IP or hostname; to specify the IPMI BMC connect and ... indicates success.) <code bash> #!/bin/bash BMC_IP="192.168.1.40" User_Name="baumkp" PW_file_locatio
- Basic Netfilter Function Block Diagram @linux_router
- com/2010/07/fail2ban-howto/|Fail2Ban Howto: Block IP Address Using Fail2ban and IPTables]] *[[htt... he ping command has a 28 bytes overhead (20 bytes IP header + 8 bytes for ICMP header). So the MTU is ... co** [[https://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html|Resolve IP Fragmentation]], [[https://www.cisco.com/c/en/us/
- ISP PPPoE Network Setup @linux_router
- client server secret IP addresses "yourusername" * "your... * for server name and unless your ISP assigns an IP address, leave this blank.</fs> Next a peer fill... logfile #debug #noipdefault : Assumes that your IP address is allocated dynamically by the ISP. noip... t to manually set up wan/eno1 interface with an ''ip link set'' instruction in the pppoe.service scrip
- Network Setup @home_server:home_server_setup
- p==== To check available interfaces and names: ''ip link'' Ensure the bridge utilites are loaded: ''... access #The DHCP server is used to assign a fixed IP address based upon MAC auto br0 iface br0 inet dh... al</code> I tried earlier to use static assigned IP setup, but had problems with operation and used s... rked. I then setup the dhcp sever to assign a fix IP address to the eth0 address.++++ ++++Netplan Old
- ISP IPoE DHCP Setup Notes @linux_router
- works to allow automatic configuration of network IP addresses and most IP traffic is over Ethernet. This needs to be taken in context of ISP access PPPo... ernets eno1: #start for pppoe and setup modem IP access dhcp4: true # yes for dhcp, no for ... b interface</code> ++++ After reboot following ''ip a'' ++++ these entries were revealed: |<code> 1:
- KPTree - Email Server Setup @home_server
- server subdomain needs to be shared on the common IP address with other subdomains and applications. W... ate between different subdomains. ===Set network IP address, static IP=== The mail server need to have a static IP address on the local area network. ++++I actually like to