Search
You can find the results of your search below.
Fulltext results:
- DHCP / DNS Setup
- in as default as below. However the configuration files noted there in will need to be set up. We will copy the existing files to default: *''sudo cp /etc/bind/named.conf.op... rmation on the // structure of BIND configuration files in Debian, *BEFORE* you customize // this configu... mail.kptree.net. </code>++++ If and of the above files are changed the serial number should be increment
- Router Miscellaneous
- list all systemd services: ''systemctl list-unit-files'', use ''systemctl list-unit-files --state=enabled'' to check all enabled. A good reference from Digital... ''/var/log/journal'' is present previous boot log files are saved. Conversely if not present, then previous boot files are not saved. Check man journalctl.conf for deta
- NFTables IP Control
- n ''sudo chmod 774 controllist.sh'' on the script files to make them executable I then created a cron jo... kp/controllist.sh 6h30m </code> ++++ The crontab files are stored at ''/var/spool/cron/crontabs/$USER''. You should not edit these files directly, use ''crontab -e'' for current user or
- ISP PPPoE Network Setup
- lle needs to be created for the connection. These files are located in "/etc/ppp/peers" directory. There ... addresses usepeerdns </code> These configuration files should allow a PPPoE connection to the ISP, using... nce configuration is more complete. To check log files use: ''sudo systemctl status pppoe'' or ''journal
- Linux Router Background
- d probably be on their side and checked their log files and found that my static IP was not uniquely assi
- ISP IPoE DHCP Setup Notes
- =multi-user.target </code> To reload the service files after any changes: ''sudo systemctl daemon-reload
- Debian / Ubuntu Network Setup
- rate'' To generate backend specific configuration files. *''sudo netplan try'' To try a new neplan conf
- Router VM
- rs *''libvirt-daemon-system'' - configuration files to run the libvirt daemon as a system service *
- Router Basic Debian Server Setup
- led. I then managed to corrupt the configuration files on the router..... Hopefully these notes expedite