enable

Search

You can find the results of your search below.

Fulltext results:

Router Hardware
1 Hits, Last modified:
Intel integrated graphics device (IGD), which is enabled by default. The graphics then defaults to the BM
Router Miscellaneous
8 Hits, Last modified:
ersion| <code>There seem to be 2 main services to enable/disable/start/stop, nprobe and ntopng: * ''sudo... 'sudo systemctl disable ntopng'' | to disable (or enable) starting on computer startup * ''sudo systemct... 'sudo systemctl disable nprobe'' | to disable (or enable) starting on computer startup We can also turn-o... ''sudo systemctl disable redis'' | to disable (or enable) starting on computer startup </code> ++++ ----
NFTables Configuration
3 Hits, Last modified:
rt number or range). The flags interval directive enables port ranges to be used. After that, you just set... rt number or range). The flags interval directive enables port ranges to be used. After that, you just set... nf. Use ''sudo systemctl status/start/stop/reload/enable/disable nftables''. Start and reload basically r
Debian / Ubuntu Network Setup
6 Hits, Last modified:
get </code> ++++ *The final command is used to enable the command to run at start-up: ''sudo systemctl enable ipv6_start.service''. *This also needs to be pe... on. ++++ ''vim torouter.sh'' | <code> #systemctl enable bind9 #systemctl enable isc-dhcp-server #systemctl enable nftables #systemctl enable pppoe #mv /etc/netpl
ISP PPPoE Network Setup
2 Hits, Last modified:
ervice from activating at system startup. We will enable later, once configuration is more complete. To c... I managed to use so.</fs> =====System Forwarding Enable===== To allow the router to forward packet the L
IPTables Configuration
1 Hits, Last modified:
A INPUT -m state --state ESTABLISHED -j ACCEPT # enable traceroute rejections to get sent out -A INPUT -p
NFTables IP Control
1 Hits, Last modified:
mount of drop packets to be seen with the counter enabled: *''sudo nft add rule inet firewall forward h