Search
You can find the results of your search below.
Fulltext results:
- NFTables IP Control
- rollist *''sudo vim /etc/nftables.conf'' : to edit the current NFTables configuration *''sudo sys... (use sudo for root) *''sudo crontab -e'' : to edit the cornjobs *''journalctl -b0 -u cron | grep c... er. ++++ example: ''sudo crontab -e'' | <code> # Edit this file to introduce tasks to be run by cron. ... /var/spool/cron/crontabs/$USER''. You should not edit these files directly, use ''crontab -e'' for curr
- Debian Server Network Setup
- s are loaded: ''sudo apt install bridge-utils''. Edit the network configuration file: ''/etc/network/in... art-up after the network was up."\\ To create and edit the service: ''sudo systemctl edit --force --full ipv6_start.service'', ''man systemctl'' and search fo
- DHCP / DNS Setup
- tware: ''sudo apt install isc-dhcp-server'' Next edit the dhcp configuration file: ''sudo vim /etc/dhcp... ustomize, # the best way is to use the "systemctl edit" command. [Unit] Description=Router advertisemen
- Router Hardware
- he default option, 1st line. Press the 'e' key to edit. Add the the 'nomodeset' option to the end of the... dified boot. For the permanent solution basically edit etc/default/grub, adding nomodeset such that GRUB
- IPTables Configuration
- sted.//** ====Sample IPTables configuration==== Edit iptables configuration file: ''sudo vim /etc/netw... boot, before the networks is brought on line: *Edit this file: ''sudo vim /etc/network/if-pre-up.d/ip
- Basic Netfilter Function Block Diagram
- 802.1Q) tagging. To set the PPPoE connection mtu edit the following file ''sudo vim /etc/ppp/ip-up'' an
- ISP PPPoE Network Setup
- ===Set up PPPoE==== "chap-secrets" configuration Edit the chap-secrets file, ''sudo vim /etc/ppp/chap-s
- Router VM
- inaries *''virtinst'' - utilities to create and edit virtual machines *''libspice-server1'' - Implem
- Wireguard VPN access from WAN to LAN
- ability to forward packets must be set / allowed, edit or add the following parameters in ''sudo vim /et