Docker nginx / php notes [KPTree Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{tag>linux docker nginx php fast-cgi php-fpm}}
======Docker nginx / php notes======

=====nginx executable=====
I had some trouble getting nginx with php-fpm to operate.  So I tried to get working a simple setup to nut-out the nuances. <fc #008080>**I got it working using php-fpm socket with Apline Linux on 2 Docker instances, one running Nginx and the other php-fpm.**</fc>  Next try would be a second Nginx in separate Docker and then trying IP TCP connectivity instead of socket file.

To run and control nginx.
  * ''nginx'' to run.
  * ''nginx -h'' to get all help / options
  * ''nginx -s //signal//'', where //signal// maybe:
    * ''stop'' for fast shutdown
    * ''quit'' for graceful shutdown
    * ''reload'' to reload the configuration files
    * ''reopen'' to reopen the log files
  * ''nginx -t'' to test configuration
  * ''nginx -c //config_file//'' to start nginx with a non default config file. Default config file is ''/etc/nginx/nginx.conf''.
=====Alpine nginx standard configuration (v3.18.4, 2023-10-07)=====

====/etc/nginx/====

++++/etc/nginx/fastcgi.conf|
<code>
fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;
fastcgi_param  REQUEST_SCHEME     $scheme;
fastcgi_param  HTTPS              $https if_not_empty;

fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;

</code>
++++

++++/etc/nginx/fastcgi_params|
<code>fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;
fastcgi_param  REQUEST_SCHEME     $scheme;
fastcgi_param  HTTPS              $https if_not_empty;

fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;</code>


See [[https://blog.martinfjordvald.com/nginx-config-history-fastcgi_params-versus-fastcgi-conf/|fastcgi_params Versus fastcgi.conf – Nginx Config History]], basically fastcgi.params is for historical reasons where ''fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;'' has to be separately configured in the location directive.
++++

++++/etc/nginx/mime.types|
<code>
types {
    text/html                                        html htm shtml;
    text/css                                         css;
    text/xml                                         xml;
    image/gif                                        gif;
    image/jpeg                                       jpeg jpg;
    application/javascript                           js;
    application/atom+xml                             atom;
    application/rss+xml                              rss;

    text/mathml                                      mml;
    text/plain                                       txt;
    text/vnd.sun.j2me.app-descriptor                 jad;
    text/vnd.wap.wml                                 wml;
    text/x-component                                 htc;

    image/avif                                       avif;
    image/png                                        png;
    image/svg+xml                                    svg svgz;
    image/tiff                                       tif tiff;
    image/vnd.wap.wbmp                               wbmp;
    image/webp                                       webp;
    image/x-icon                                     ico;
    image/x-jng                                      jng;
    image/x-ms-bmp                                   bmp;

    font/woff                                        woff;
    font/woff2                                       woff2;

    application/java-archive                         jar war ear;
    application/json                                 json;
    application/mac-binhex40                         hqx;
    application/msword                               doc;
    application/pdf                                  pdf;
    application/postscript                           ps eps ai;
    application/rtf                                  rtf;
    application/vnd.apple.mpegurl                    m3u8;
    application/vnd.google-earth.kml+xml             kml;
    application/vnd.google-earth.kmz                 kmz;
    application/vnd.ms-excel                         xls;
    application/vnd.ms-fontobject                    eot;
    application/vnd.ms-powerpoint                    ppt;
    application/vnd.oasis.opendocument.graphics      odg;
    application/vnd.oasis.opendocument.presentation  odp;
    application/vnd.oasis.opendocument.spreadsheet   ods;
    application/vnd.oasis.opendocument.text          odt;
    application/vnd.openxmlformats-officedocument.presentationml.presentation
                                                     pptx;
    application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
                                                     xlsx;
    application/vnd.openxmlformats-officedocument.wordprocessingml.document
                                                     docx;
    application/vnd.wap.wmlc                         wmlc;
    application/wasm                                 wasm;
    application/x-7z-compressed                      7z;
    application/x-cocoa                              cco;
    application/x-java-archive-diff                  jardiff;
    application/x-java-jnlp-file                     jnlp;
    application/x-makeself                           run;
    application/x-perl                               pl pm;
    application/x-pilot                              prc pdb;
    application/x-rar-compressed                     rar;
    application/x-redhat-package-manager             rpm;
    application/x-sea                                sea;
    application/x-shockwave-flash                    swf;
    application/x-stuffit                            sit;
    application/x-tcl                                tcl tk;
    application/x-x509-ca-cert                       der pem crt;
    application/x-xpinstall                          xpi;
    application/xhtml+xml                            xhtml;
    application/xspf+xml                             xspf;
    application/zip                                  zip;

    application/octet-stream                         bin exe dll;
    application/octet-stream                         deb;
    application/octet-stream                         dmg;
    application/octet-stream                         iso img;
    application/octet-stream                         msi msp msm;

    audio/midi                                       mid midi kar;
    audio/mpeg                                       mp3;
    audio/ogg                                        ogg;
    audio/x-m4a                                      m4a;
    audio/x-realaudio                                ra;

    video/3gpp                                       3gpp 3gp;
    video/mp2t                                       ts;
    video/mp4                                        mp4;
    video/mpeg                                       mpeg mpg;
    video/quicktime                                  mov;
    video/webm                                       webm;
    video/x-flv                                      flv;
    video/x-m4v                                      m4v;
    video/x-mng                                      mng;
    video/x-ms-asf                                   asx asf;
    video/x-ms-wmv                                   wmv;
    video/x-msvideo                                  avi;
}
</code>
++++

++++/etc/nginx/nginx.conf|
<code>
# /etc/nginx/nginx.conf

user nginx;

# Set number of worker processes automatically based on number of CPU cores.
worker_processes auto;

# Enables the use of JIT for regular expressions to speed-up their processing.
pcre_jit on;

# Configures default error logger.
error_log /var/log/nginx/error.log warn;

# Includes files with directives to load dynamic modules.
include /etc/nginx/modules/*.conf;

# Include files with config snippets into the root context.
include /etc/nginx/conf.d/*.conf;

events {
	# The maximum number of simultaneous connections that can be opened by
	# a worker process.
	worker_connections 1024;
}

http {
	# Includes mapping of file name extensions to MIME types of responses
	# and defines the default type.
	include /etc/nginx/mime.types;
	default_type application/octet-stream;

	# Name servers used to resolve names of upstream servers into addresses.
	# It's also needed when using tcpsocket and udpsocket in Lua modules.
	#resolver 1.1.1.1 1.0.0.1 2606:4700:4700::1111 2606:4700:4700::1001;

	# Don't tell nginx version to the clients. Default is 'on'.
	server_tokens off;

	# Specifies the maximum accepted body size of a client request, as
	# indicated by the request header Content-Length. If the stated content
	# length is greater than this size, then the client receives the HTTP
	# error code 413. Set to 0 to disable. Default is '1m'.
	client_max_body_size 1m;

	# Sendfile copies data between one FD and other from within the kernel,
	# which is more efficient than read() + write(). Default is off.
	sendfile on;

	# Causes nginx to attempt to send its HTTP response head in one packet,
	# instead of using partial frames. Default is 'off'.
	tcp_nopush on;


	# Enables the specified protocols. Default is TLSv1 TLSv1.1 TLSv1.2.
	# TIP: If you're not obligated to support ancient clients, remove TLSv1.1.
	ssl_protocols TLSv1.1 TLSv1.2 TLSv1.3;

	# Path of the file with Diffie-Hellman parameters for EDH ciphers.
	# TIP: Generate with: `openssl dhparam -out /etc/ssl/nginx/dh2048.pem 2048`
	#ssl_dhparam /etc/ssl/nginx/dh2048.pem;

	# Specifies that our cipher suits should be preferred over client ciphers.
	# Default is 'off'.
	ssl_prefer_server_ciphers on;

	# Enables a shared SSL cache with size that can hold around 8000 sessions.
	# Default is 'none'.
	ssl_session_cache shared:SSL:2m;

	# Specifies a time during which a client may reuse the session parameters.
	# Default is '5m'.
	ssl_session_timeout 1h;

	# Disable TLS session tickets (they are insecure). Default is 'on'.
	ssl_session_tickets off;


	# Enable gzipping of responses.
	#gzip on;

	# Set the Vary HTTP header as defined in the RFC 2616. Default is 'off'.
	gzip_vary on;


	# Helper variable for proxying websockets.
	map $http_upgrade $connection_upgrade {
		default upgrade;
		'' close;
	}


	# Specifies the main log format.
	log_format main '$remote_addr - $remote_user [$time_local] "$request" '
			'$status $body_bytes_sent "$http_referer" '
			'"$http_user_agent" "$http_x_forwarded_for"';

	# Sets the path, format, and configuration for a buffered log write.
	access_log /var/log/nginx/access.log main;


	# Includes virtual hosts configs.
	include /etc/nginx/http.d/*.conf;
}
</code>

  ***user directive in nginx must match that in php-fpm too allow file access.**
  ***s6-rc requires programs are run in foreground, to do this add directive: ''daemon off;''.**

++++

++++/etc/nginx/scgi_params|
<code>
scgi_param  REQUEST_METHOD     $request_method;
scgi_param  REQUEST_URI        $request_uri;
scgi_param  QUERY_STRING       $query_string;
scgi_param  CONTENT_TYPE       $content_type;

scgi_param  DOCUMENT_URI       $document_uri;
scgi_param  DOCUMENT_ROOT      $document_root;
scgi_param  SCGI               1;
scgi_param  SERVER_PROTOCOL    $server_protocol;
scgi_param  REQUEST_SCHEME     $scheme;
scgi_param  HTTPS              $https if_not_empty;

scgi_param  REMOTE_ADDR        $remote_addr;
scgi_param  REMOTE_PORT        $remote_port;
scgi_param  SERVER_PORT        $server_port;
scgi_param  SERVER_NAME        $server_name;
</code>

[[https://en.wikipedia.org/wiki/Simple_Common_Gateway_Interface|Simple Common Gateway Interface (scgi)]] look like another alternative protocol similar to FastCGI. Probably not relevant unless you intend to use.
++++

++++/etc/nginx/uwsgi_params|
<code>
uwsgi_param  QUERY_STRING       $query_string;
uwsgi_param  REQUEST_METHOD     $request_method;
uwsgi_param  CONTENT_TYPE       $content_type;
uwsgi_param  CONTENT_LENGTH     $content_length;

uwsgi_param  REQUEST_URI        $request_uri;
uwsgi_param  PATH_INFO          $document_uri;
uwsgi_param  DOCUMENT_ROOT      $document_root;
uwsgi_param  SERVER_PROTOCOL    $server_protocol;
uwsgi_param  REQUEST_SCHEME     $scheme;
uwsgi_param  HTTPS              $https if_not_empty;

uwsgi_param  REMOTE_ADDR        $remote_addr;
uwsgi_param  REMOTE_PORT        $remote_port;
uwsgi_param  SERVER_PORT        $server_port;
uwsgi_param  SERVER_NAME        $server_name; </code>

[[https://uwsgi-docs.readthedocs.io/en/latest/index.html|The uWSGI project]] %%looks like an older module add in for Python, and also other languages. Probably not relevant unless you intend to use.%%
++++

===/etc/nginx/http.d/===

++++/etc/nginx/http.d/default.conf|
<code>
# This is a default site configuration which will simply return 404, preventing
# chance access to any other virtualhost.

server {
	listen 80 default_server;
	listen [::]:80 default_server;

	# Everything is a 404
	location / {
		return 404;
	}

	# You may need this to prevent return 404 recursion.
	location = /404.html {
		internal;
	}
}</code>
++++

===/etc/nginx/modules/===
This directory is empty.

===/etc/nginx/conf.d/===
This directory does not exist.  This is a concern as the default nginx configuration ''nginx.conf'' references this directory.  Of course the ''/etc/nginx/conf.d'' is a default override directory, so it can be created on use.



====/usr/share/nginx/====

++++/usr/share/nginx/http-default_server.conf|
<code># This is a default site configuration which will simply return 404, preventing
# chance access to any other virtualhost.

server {
	listen 80 default_server;
	listen [::]:80 default_server;

	# Everything is a 404
	location / {
		return 404;
	}

	# You may need this to prevent return 404 recursion.
	location = /404.html {
		internal;
	}
}</code>

''/usr/share/nginx/http-default_server.conf'' is the same as ''/etc/nginx/http.d/default.conf'' listed above.
++++

====/var/lib/nginx/html/====
++++/var/lib/nginx/html/index.html|
<code html>
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
html { color-scheme: light dark; }
body { width: 35em; margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif; }
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>

<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>

<p><em>Thank you for using nginx.</em></p>
</body>
</html>
</code>
++++
====/var/www/====
There is following empty subdirectory structure: ''/var/www/localhost/htdocs''

=====basic static site from base setup=====
Unless otherwise configured nginx reads the default configuration file at ''/etc/nginx/nginx.conf''.  I replaced the default ''nginx.conf'' user directive to match that in the ''/etc/php/php-fpm.d/www.conf'' for the socket ''listen.owner'' and ''listen.group'' directives. I do not change the ''www.conf'' ''user'' and ''group'' directives, which are default ''nobody'' This file has dynamic module overrides and root code snippet updates. The main virtual host configuration files are located in sub-directory ''/etc/nginx/http.d''
====static web page====

Place this at following location; ''/var/www/test/index.html''

++++basic static html test page|
<code html>
<!DOCTYPE html>
<html>
<head>
<title>Docker Static nginx Test Page</title>
</head>
<body>

<h1>Basic Test Header</h1>
<p>Test 1, 2, 3.....</p>

</body>
</html>
</code>
++++

====Basic Static Content====
The directory ''/etc/nginx/http.d/'' should already exit. Create test.conf.
++++/etc/nginx/http.d/test.conf|
<code>
server {
  location / {
    root /var/www/test;
  }
} </code>
++++
The existing default.conf return 404 error and will conflict with the new simple configuration and need to be removed.
====nginx logging====
nginx seems to have the following log levels # [ debug | info | notice | warn | error | crit ].  Hence when developing and creating a html server use of ''info'' or ''notice'' is probably used whereas   ''warn'' or ''error'' level logging would probably be used for a normal running html server.

====s6-rc nginx====
In order to run nginx in the foreground us ''echo "daemon off;" >> /etc/nginx/nginx.conf''.  I tried ''%%nginx -g 'daemon off;'%%'', but that did not work.

=====php-fpm=====
There are 2 php executables, php a cli version (''/usr/bin/php82'') and php-fpm for fpm-fcgi (''/usr/sbin/php-fpm82'').  We are interested in the fpm type and it can be run in foreground using flag ''-F'' or ''%%--nodaemonize%%''.  The php-fpm modules are stored here ''/usr/lib/php82/modules''. There is ''/etc/php82'' that has the configuration files.

====php82 config files====
 
++++/etc/php82/php-fpm.conf|
<code>
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix (/usr). This prefix can be dynamically changed by using the
; '-p' argument from the command line.

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
;pid = run/php-fpm82.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; into a local file.
; Note: the default prefix is /var
; Default Value: log/php82/error.log
;error_log = log/php82/error.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm82
;syslog.ident = php-fpm82

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; Log limit on number of characters in the single line (log entry). If the
; line is over the limit, it is wrapped on multiple lines. The limit is for
; all logged characters including message prefix and suffix if present. However
; the new line character does not count into it as it is present only when
; logging to a file descriptor. It means the new line character is not present
; when logging to syslog.
; Default Value: 1024
;log_limit = 4096

; Log buffering specifies if the log line is buffered which means that the
; line is written in a single write operation. If the value is false, then the
; data is written directly into the file descriptor. It is an experimental
; option that can potentially improve logging performance and memory usage
; for some heavy logging scenarios. This option is ignored if logging to syslog
; as it has to be always buffered.
; Default value: yes
;log_buffering = no

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been designed to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lowest priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless specified otherwise
; Default Value: no set
; process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll  (Solaris >= 7)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is built with systemd integration, specify the interval,
; in seconds, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p argument)
;  - /usr otherwise
include=/etc/php82/php-fpm.d/*.conf
</code>
++++

++++/etc/php82/php.ini|
<code>
[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini   ;
;;;;;;;;;;;;;;;;;;;
; PHP's initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP's behavior.

; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable.
; 3. A number of predefined registry keys on Windows
; 4. Current working directory (except CLI)
; 5. The web server's directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the --with-config-file-path compile time option, or the
; Windows directory (usually C:\windows)
; See the PHP docs for more specific information.
; https://php.net/configuration.file

; The syntax of the file is extremely simple.  Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory.  Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from www.example.com.  Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; https://php.net/ini.sections

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation.  If PHP can't find an expected
; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:
; |  bitwise OR
; ^  bitwise XOR
; &  bitwise AND
; ~  bitwise NOT
; !  boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:

; foo =         ; sets foo to an empty string
; foo = None    ; sets foo to an empty string
; foo = "None"  ; sets foo to the string 'None'

; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.

; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it is
; much more verbose when it comes to errors. We recommend using the
; development version only in development environments, as errors shown to
; application users can inadvertently leak otherwise secure information.

; This is the php.ini-production INI file.

;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;

; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP's default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP's behavior.

; display_errors
;   Default Value: On
;   Development Value: On
;   Production Value: Off

; display_startup_errors
;   Default Value: On
;   Development Value: On
;   Production Value: Off

; error_reporting
;   Default Value: E_ALL
;   Development Value: E_ALL
;   Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; log_errors
;   Default Value: Off
;   Development Value: On
;   Production Value: On

; max_input_time
;   Default Value: -1 (Unlimited)
;   Development Value: 60 (60 seconds)
;   Production Value: 60 (60 seconds)

; output_buffering
;   Default Value: Off
;   Development Value: 4096
;   Production Value: 4096

; register_argc_argv
;   Default Value: On
;   Development Value: Off
;   Production Value: Off

; request_order
;   Default Value: None
;   Development Value: "GP"
;   Production Value: "GP"

; session.gc_divisor
;   Default Value: 100
;   Development Value: 1000
;   Production Value: 1000

; session.sid_bits_per_character
;   Default Value: 4
;   Development Value: 5
;   Production Value: 5

; short_open_tag
;   Default Value: On
;   Development Value: Off
;   Production Value: Off

; variables_order
;   Default Value: "EGPCS"
;   Development Value: "GPCS"
;   Production Value: "GPCS"

; zend.exception_ignore_args
;   Default Value: Off
;   Development Value: Off
;   Production Value: On

; zend.exception_string_param_max_len
;   Default Value: 15
;   Development Value: 15
;   Production Value: 0

;;;;;;;;;;;;;;;;;;;;
; php.ini Options  ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
;user_ini.filename = ".user.ini"

; To disable this feature set this option to an empty value
;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
; https://php.net/engine
engine = On

; This directive determines whether or not PHP will recognize code between
; <? and ?> tags as PHP source which should be processed as such. It is
; generally recommended that <?php and ?> should be used and that this feature
; should be disabled, as enabling it may result in issues when generating XML
; documents, however this remains supported for backward compatibility reasons.
; Note that this directive does not control the <?= shorthand tag, which can be
; used regardless of this directive.
; Default Value: On
; Development Value: Off
; Production Value: Off
; https://php.net/short-open-tag
short_open_tag = Off

; The number of significant digits displayed in floating point numbers.
; https://php.net/precision
precision = 14

; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application's output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you've already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
;   functions.
; Possible Values:
;   On = Enabled and buffer is unlimited. (Use with caution)
;   Off = Disabled
;   Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; https://php.net/output-buffering
output_buffering = 4096

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
;   directive. Instead, explicitly set the output handler using ob_start().
;   Using this ini directive may cause problems unless you know what script
;   is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
;   Instead you must use zlib.output_handler.
; https://php.net/output-handler
;output_handler =

; URL rewriter function rewrites URL on the fly by using
; output buffer. You can set target tags by this configuration.
; "form" tag is special tag. It will add hidden input tag to pass values.
; Refer to session.trans_sid_tags for usage.
; Default Value: "form="
; Development Value: "form="
; Production Value: "form="
;url_rewriter.tags

; URL rewriter will not rewrite absolute URL nor form by default. To enable
; absolute URL rewrite, allowed hosts must be defined at RUNTIME.
; Refer to session.trans_sid_hosts for more details.
; Default Value: ""
; Development Value: ""
; Production Value: ""
;url_rewriter.hosts

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
;   outputs chunks that are few hundreds bytes each as a result of
;   compression. If you prefer a larger chunk size for better
;   performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
;   output_handler, or otherwise the output will be corrupted.
; https://php.net/zlib.output-compression
zlib.output_compression = Off

; https://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; https://php.net/zlib.output-handler
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; https://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =

; The unserialize_max_depth specifies the default depth limit for unserialized
; structures. Setting the depth limit too high may result in stack overflows
; during unserialization. The unserialize_max_depth ini setting can be
; overridden by the max_depth option on individual unserialize() calls.
; A value of 0 disables the depth limit.
;unserialize_max_depth = 4096

; When floats & doubles are serialized, store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
; The value is also used for json_encode when encoding double values.
; If -1 is used, then dtoa mode 0 is used which automatically select the best
; precision.
serialize_precision = -1

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file.
; Note: disables the realpath cache
; https://php.net/open-basedir
;open_basedir =

; This directive allows you to disable certain functions.
; It receives a comma-delimited list of function names.
; https://php.net/disable-functions
disable_functions =

; This directive allows you to disable certain classes.
; It receives a comma-delimited list of class names.
; https://php.net/disable-classes
disable_classes =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <span style="color: ???????"> would work.
; https://php.net/syntax-highlighting
;highlight.string  = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.default = #0000BB
;highlight.html    = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP's default behavior
; is to disable this feature.
; https://php.net/ignore-user-abort
;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; Note: if open_basedir is set, the cache is disabled
; https://php.net/realpath-cache-size
;realpath_cache_size = 4096k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; https://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120

; Enables or disables the circular reference collector.
; https://php.net/zend.enable-gc
zend.enable_gc = On

; If enabled, scripts may be written in encodings that are incompatible with
; the scanner.  CP936, Big5, CP949 and Shift_JIS are the examples of such
; encodings.  To use this feature, mbstring extension must be enabled.
;zend.multibyte = Off

; Allows to set the default encoding for the scripts.  This value will be used
; unless "declare(encoding=...)" directive appears at the top of the script.
; Only affects if zend.multibyte is set.
;zend.script_encoding =

; Allows to include or exclude arguments from stack traces generated for exceptions.
; In production, it is recommended to turn this setting on to prohibit the output
; of sensitive information in stack traces
; Default Value: Off
; Development Value: Off
; Production Value: On
zend.exception_ignore_args = On

; Allows setting the maximum string length in an argument of a stringified stack trace
; to a value between 0 and 1000000.
; This has no effect when zend.exception_ignore_args is enabled.
; Default Value: 15
; Development Value: 15
; Production Value: 0
; In production, it is recommended to set this to 0 to reduce the output
; of sensitive information in stack traces.
zend.exception_string_param_max_len = 0

;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header).  It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; https://php.net/expose-php
expose_php = On

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds
; https://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 30

; Maximum amount of time each script may spend parsing request data. It's a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; https://php.net/max-input-time
max_input_time = 60

; Maximum input variable nesting level
; https://php.net/max-input-nesting-level
;max_input_nesting_level = 64

; How many GET/POST/COOKIE input variables may be accepted
;max_input_vars = 1000

; How many multipart body parts (combined input variable and file uploads) may
; be accepted.
; Default Value: -1 (Sum of max_input_vars and max_file_uploads)
;max_multipart_body_parts = 1500

; Maximum amount of memory a script may consume
; https://php.net/memory-limit
memory_limit = 128M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn't be wasting
; resources complaining about best practices and coding standards. That's what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
;
; Error Level Constants:
; E_ALL             - All errors and warnings
; E_ERROR           - fatal run-time errors
; E_RECOVERABLE_ERROR  - almost fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often result
;                     from a bug in your code, but it's possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     relying on the fact it is automatically initialized to an
;                     empty string)
; E_STRICT          - run-time notices, enable to have PHP suggest changes
;                     to your code which will ensure the best interoperability
;                     and forward compatibility of your code
; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
; E_DEPRECATED      - warn about code that will not work in future versions
;                     of PHP
; E_USER_DEPRECATED - user-generated deprecation warnings
;
; Common Values:
;   E_ALL (Show all errors, warnings and notices including coding standards.)
;   E_ALL & ~E_NOTICE  (Show all errors, except for notices)
;   E_ALL & ~E_NOTICE & ~E_STRICT  (Show all errors, except for notices and coding standards warnings.)
;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
; Default Value: E_ALL
; Development Value: E_ALL
; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; https://php.net/error-reporting
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT

; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; For production environments, we recommend logging errors rather than
; sending them to STDOUT.
; Possible Values:
;   Off = Do not display any errors
;   stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
;   On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; https://php.net/display-errors
display_errors = Off

; The display of errors which occur during PHP's startup sequence are handled
; separately from display_errors. We strongly recommend you set this to 'off'
; for production servers to avoid leaking configuration details.
; Default Value: On
; Development Value: On
; Production Value: Off
; https://php.net/display-startup-errors
display_startup_errors = Off

; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; https://php.net/log-errors
log_errors = On

; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; https://php.net/ignore-repeated-errors
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; https://php.net/ignore-repeated-source
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This is only effective in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; https://php.net/report-memleaks
report_memleaks = On

; This setting is off by default.
;report_zend_debug = 0

; Turn off normal error reporting and emit XML-RPC error XML
; https://php.net/xmlrpc-errors
;xmlrpc_errors = 0

; An XML-RPC faultCode
;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of formatting the
; error message as HTML for easier reading. This directive controls whether
; the error message is formatted as HTML or not.
; Note: This directive is hardcoded to Off for the CLI SAPI
; https://php.net/html-errors
;html_errors = On

; If html_errors is set to On *and* docref_root is not empty, then PHP
; produces clickable error messages that direct to a page describing the error
; or function causing the error in detail.
; You can download a copy of the PHP manual from https://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot. PHP's default behavior is to leave these settings empty, in which
; case no links to documentation are generated.
; Note: Never use this feature for production boxes.
; https://php.net/docref-root
; Examples
;docref_root = "/phpmanual/"

; https://php.net/docref-ext
;docref_ext = .html

; String to output before an error message. PHP's default behavior is to leave
; this setting blank.
; https://php.net/error-prepend-string
; Example:
;error_prepend_string = "<span style='color: #ff0000'>"

; String to output after an error message. PHP's default behavior is to leave
; this setting blank.
; https://php.net/error-append-string
; Example:
;error_append_string = "</span>"

; Log errors to specified file. PHP's default behavior is to leave this value
; empty.
; https://php.net/error-log
; Example:
;error_log = php_errors.log
; Log errors to syslog (Event Log on Windows).
;error_log = syslog

; The syslog ident is a string which is prepended to every message logged
; to syslog. Only used when error_log is set to syslog.
;syslog.ident = php

; The syslog facility is used to specify what type of program is logging
; the message. Only used when error_log is set to syslog.
;syslog.facility = user

; Set this to disable filtering control characters (the default).
; Some loggers only accept NVT-ASCII, others accept anything that's not
; control characters. If your logger accepts everything, then no filtering
; is needed at all.
; Allowed values are:
;   ascii (all printable ASCII characters and NL)
;   no-ctrl (all characters except control characters)
;   all (all characters)
;   raw (like "all", but messages are not split at newlines)
; https://php.net/syslog.filter
;syslog.filter = ascii

;windows.show_crt_warning
; Default value: 0
; Development value: 0
; Production value: 0

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;

; The separator used in PHP generated URLs to separate arguments.
; PHP's default setting is "&".
; https://php.net/arg-separator.output
; Example:
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; PHP's default setting is "&".
; NOTE: Every character in this directive is considered as separator!
; https://php.net/arg-separator.input
; Example:
;arg_separator.input = ";&"

; This directive determines which super global arrays are registered when PHP
; starts up. G,P,C,E & S are abbreviations for the following respective super
; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
; paid for the registration of these arrays and because ENV is not as commonly
; used as the others, ENV is not recommended on productions servers. You
; can still get access to the environment variables through getenv() should you
; need to.
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS";
; https://php.net/variables-order
variables_order = "GPCS"

; This directive determines which super global data (G,P & C) should be
; registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive
; are specified in the same manner as the variables_order directive,
; EXCEPT one. Leaving this value empty will cause PHP to use the value set
; in the variables_order directive. It does not mean it will leave the super
; globals array REQUEST empty.
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; https://php.net/request-order
request_order = "GP"

; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; https://php.net/register-argc-argv
register_argc_argv = Off

; When enabled, the ENV, REQUEST and SERVER variables are created when they're
; first used (Just In Time) instead of when the script starts. If these
; variables are not used within a script, having this directive on will result
; in a performance gain. The PHP directive register_argc_argv must be disabled
; for this directive to have any effect.
; https://php.net/auto-globals-jit
auto_globals_jit = On

; Whether PHP will read the POST data.
; This option is enabled by default.
; Most likely, you won't want to disable this option globally. It causes $_POST
; and $_FILES to always be empty; the only way you will be able to read the
; POST data will be through the php://input stream wrapper. This can be useful
; to proxy requests or to process the POST data in a memory efficient fashion.
; https://php.net/enable-post-data-reading
;enable_post_data_reading = Off

; Maximum size of POST data that PHP will accept.
; Its value may be 0 to disable the limit. It is ignored if POST data reading
; is disabled through enable_post_data_reading.
; https://php.net/post-max-size
post_max_size = 8M

; Automatically add files before PHP document.
; https://php.net/auto-prepend-file
auto_prepend_file =

; Automatically add files after PHP document.
; https://php.net/auto-append-file
auto_append_file =

; By default, PHP will output a media type using the Content-Type header. To
; disable this, simply set it to be empty.
;
; PHP's built-in default media type is set to text/html.
; https://php.net/default-mimetype
default_mimetype = "text/html"

; PHP's default character set is set to UTF-8.
; https://php.net/default-charset
default_charset = "UTF-8"

; PHP internal character encoding is set to empty.
; If empty, default_charset is used.
; https://php.net/internal-encoding
;internal_encoding =

; PHP input character encoding is set to empty.
; If empty, default_charset is used.
; https://php.net/input-encoding
;input_encoding =

; PHP output character encoding is set to empty.
; If empty, default_charset is used.
; See also output_buffer.
; https://php.net/output-encoding
;output_encoding =

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
include_path = ".:/usr/share/php82"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
;
; PHP's default setting for include_path is ".;/path/to/php/pear"
; https://php.net/include-path

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues.  The alternate is to use the
; cgi.force_redirect configuration below
; https://php.net/doc-root
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
; https://php.net/user-dir
user_dir =

; Directory in which the loadable extensions (modules) reside.
; https://php.net/extension-dir
;extension_dir = "./"
; On windows:
;extension_dir = "ext"

; Directory where the temporary files should be placed.
; Defaults to the system default (see sys_get_temp_dir)
;sys_temp_dir = "/tmp"

; Whether or not to enable the dl() function.  The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; https://php.net/enable-dl
enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers.  Left undefined, PHP turns this on by default.  You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; https://php.net/cgi.force-redirect
;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP's default behavior is to disable this feature.
;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution.  Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; https://php.net/cgi.redirect-status-env
;cgi.redirect_status_env =

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec.  A setting
; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; https://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1

; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
; of the web tree and people will not be able to circumvent .htaccess security.
;cgi.discard_path=1

; FastCGI under IIS supports the ability to impersonate
; security tokens of the calling client.  This allows IIS to define the
; security context that the request runs under.  mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS.  Default is zero.
; https://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1

; Disable logging through FastCGI connection. PHP's default behavior is to enable
; this feature.
;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If set to 0, PHP sends Status: header that
; is supported by Apache. When this option is set to 1, PHP will send
; RFC2616 compliant header.
; Default is zero.
; https://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0

; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
; (shebang) at the top of the running script. This line might be needed if the
; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
; mode skips this line and ignores its content if this directive is turned on.
; https://php.net/cgi.check-shebang-line
;cgi.check_shebang_line=1

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
; https://php.net/file-uploads
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; https://php.net/upload-tmp-dir
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
; https://php.net/upload-max-filesize
upload_max_filesize = 2M

; Maximum number of files that can be uploaded via a single request
max_file_uploads = 20

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; https://php.net/allow-url-fopen
allow_url_fopen = On

; Whether to allow include/require to open URLs (like https:// or ftp://) as files.
; https://php.net/allow-url-include
allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP's default setting
; for this is empty.
; https://php.net/from
;from="john@doe.com"

; Define the User-Agent string. PHP's default setting for this is empty.
; https://php.net/user-agent
;user_agent="PHP"

; Default timeout for socket based streams (seconds)
; https://php.net/default-socket-timeout
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; https://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following
; syntax:
;
;   extension=modulename
;
; For example:
;
;   extension=mysqli
;
; When the extension library to load is not located in the default extension
; directory, You may specify an absolute path to the library file:
;
;   extension=/path/to/extension/mysqli.so
;
; Note : The syntax used in previous PHP versions ('extension=<ext>.so' and
; 'extension='php_<ext>.dll') is supported for legacy reasons and may be
; deprecated in a future PHP major version. So, when it is possible, please
; move to the new ('extension=<ext>) syntax.
;
; Notes for Windows environments :
;
; - Many DLL files are located in the ext/
;   extension folders as well as the separate PECL DLL download.
;   Be sure to appropriately set the extension_dir directive.
;
;extension=bz2

; The ldap extension must be before curl if OpenSSL 1.0.2 and OpenLDAP is used
; otherwise it results in segfault when unloading after using SASL.
; See https://github.com/php/php-src/issues/8620 for more info.
;extension=ldap

;extension=curl
;extension=ffi
;extension=ftp
;extension=fileinfo
;extension=gd
;extension=gettext
;extension=gmp
;extension=intl
;extension=imap
;extension=mbstring
;extension=exif      ; Must be after mbstring as it depends on it
;extension=mysqli
;extension=oci8_12c  ; Use with Oracle Database 12c Instant Client
;extension=oci8_19  ; Use with Oracle Database 19 Instant Client
;extension=odbc
;extension=openssl
;extension=pdo_firebird
;extension=pdo_mysql
;extension=pdo_oci
;extension=pdo_odbc
;extension=pdo_pgsql
;extension=pdo_sqlite
;extension=pgsql
;extension=shmop

; The MIBS data available in the PHP distribution must be installed.
; See https://www.php.net/manual/en/snmp.installation.php
;extension=snmp

;extension=soap
;extension=sockets
;extension=sodium
;extension=sqlite3
;extension=tidy
;extension=xsl
;extension=zip

;zend_extension=opcache

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[CLI Server]
; Whether the CLI web server uses ANSI color coding in its terminal output.
cli_server.color = On

[Date]
; Defines the default timezone used by the date functions
; https://php.net/date.timezone
;date.timezone =

; https://php.net/date.default-latitude
;date.default_latitude = 31.7667

; https://php.net/date.default-longitude
;date.default_longitude = 35.2333

; https://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.833333

; https://php.net/date.sunset-zenith
;date.sunset_zenith = 90.833333

[filter]
; https://php.net/filter.default
;filter.default = unsafe_raw

; https://php.net/filter.default-flags
;filter.default_flags =

[iconv]
; Use of this INI entry is deprecated, use global input_encoding instead.
; If empty, default_charset or input_encoding or iconv.input_encoding is used.
; The precedence is: default_charset < input_encoding < iconv.input_encoding
;iconv.input_encoding =

; Use of this INI entry is deprecated, use global internal_encoding instead.
; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
;iconv.internal_encoding =

; Use of this INI entry is deprecated, use global output_encoding instead.
; If empty, default_charset or output_encoding or iconv.output_encoding is used.
; The precedence is: default_charset < output_encoding < iconv.output_encoding
; To use an output encoding conversion, iconv's output handler must be set
; otherwise output encoding conversion cannot be performed.
;iconv.output_encoding =

[imap]
; rsh/ssh logins are disabled by default. Use this INI entry if you want to
; enable them. Note that the IMAP library does not filter mailbox names before
; passing them to rsh/ssh command, thus passing untrusted data to this function
; with rsh/ssh enabled is insecure.
;imap.enable_insecure_rsh=0

[intl]
;intl.default_locale =
; This directive allows you to produce PHP errors when some error
; happens within intl functions. The value is the level of the error produced.
; Default is 0, which does not produce any errors.
;intl.error_level = E_WARNING
;intl.use_exceptions = 0

[sqlite3]
; Directory pointing to SQLite3 extensions
; https://php.net/sqlite3.extension-dir
;sqlite3.extension_dir =

; SQLite defensive mode flag (only available from SQLite 3.26+)
; When the defensive flag is enabled, language features that allow ordinary
; SQL to deliberately corrupt the database file are disabled. This forbids
; writing directly to the schema, shadow tables (eg. FTS data tables), or
; the sqlite_dbpage virtual table.
; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
; (for older SQLite versions, this flag has no use)
;sqlite3.defensive = 1

[Pcre]
; PCRE library backtracking limit.
; https://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000

; PCRE library recursion limit.
; Please note that if you set this value to a high number you may consume all
; the available process stack and eventually crash PHP (due to reaching the
; stack size limit imposed by the Operating System).
; https://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000

; Enables or disables JIT compilation of patterns. This requires the PCRE
; library to be compiled with JIT support.
;pcre.jit=1

[Pdo]
; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
; https://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict

[Pdo_mysql]
; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
pdo_mysql.default_socket=

[Phar]
; https://php.net/phar.readonly
;phar.readonly = On

; https://php.net/phar.require-hash
;phar.require_hash = On

;phar.cache_list =

[mail function]
; For Win32 only.
; https://php.net/smtp
SMTP = localhost
; https://php.net/smtp-port
smtp_port = 25

; For Win32 only.
; https://php.net/sendmail-from
;sendmail_from = me@example.com

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
; https://php.net/sendmail-path
;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail().
;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = Off

; Use mixed LF and CRLF line separators to keep compatibility with some
; RFC 2822 non conformant MTA.
mail.mixed_lf_and_crlf = Off

; The path to a log file that will log all mail() calls. Log entries include
; the full path of the script, line number, To address and headers.
;mail.log =
; Log mail to syslog (Event Log on Windows).
;mail.log = syslog

[ODBC]
; https://php.net/odbc.default-db
;odbc.default_db    =  Not yet implemented

; https://php.net/odbc.default-user
;odbc.default_user  =  Not yet implemented

; https://php.net/odbc.default-pw
;odbc.default_pw    =  Not yet implemented

; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype

; Allow or prevent persistent links.
; https://php.net/odbc.allow-persistent
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
; https://php.net/odbc.check-persistent
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
; https://php.net/odbc.max-persistent
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
; https://php.net/odbc.max-links
odbc.max_links = -1

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
; https://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; https://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQLi]

; Maximum number of persistent links.  -1 means no limit.
; https://php.net/mysqli.max-persistent
mysqli.max_persistent = -1

; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
; https://php.net/mysqli.allow_local_infile
;mysqli.allow_local_infile = On

; It allows the user to specify a folder where files that can be sent via LOAD DATA
; LOCAL can exist. It is ignored if mysqli.allow_local_infile is enabled.
;mysqli.local_infile_directory =

; Allow or prevent persistent links.
; https://php.net/mysqli.allow-persistent
mysqli.allow_persistent = On

; Maximum number of links.  -1 means no limit.
; https://php.net/mysqli.max-links
mysqli.max_links = -1

; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
; https://php.net/mysqli.default-port
mysqli.default_port = 3306

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
; https://php.net/mysqli.default-socket
mysqli.default_socket =

; Default host for mysqli_connect() (doesn't apply in safe mode).
; https://php.net/mysqli.default-host
mysqli.default_host =

; Default user for mysqli_connect() (doesn't apply in safe mode).
; https://php.net/mysqli.default-user
mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
; https://php.net/mysqli.default-pw
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

; If this option is enabled, closing a persistent connection will rollback
; any pending transactions of this connection, before it is put back
; into the persistent connection pool.
;mysqli.rollback_on_cached_plink = Off

[mysqlnd]
; Enable / Disable collection of general statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
mysqlnd.collect_memory_statistics = Off

; Records communication from all extensions using mysqlnd to the specified log
; file.
; https://php.net/mysqlnd.debug
;mysqlnd.debug =

; Defines which queries will be logged.
;mysqlnd.log_mask = 0

; Default size of the mysqlnd memory pool, which is used by result sets.
;mysqlnd.mempool_default_size = 16000

; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
;mysqlnd.net_read_buffer_size = 32768

; Timeout for network requests in seconds.
;mysqlnd.net_read_timeout = 31536000

; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
; key.
;mysqlnd.sha256_server_public_key =

[OCI8]

; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; https://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; https://php.net/oci8.max-persistent
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; https://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; https://php.net/oci8.ping-interval
;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle Database Resident
; Connection Pooling (DRCP).  To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; https://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20

; Tuning: Enables row prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; https://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100

; Tuning: Sets the amount of LOB data that is internally returned from
; Oracle Database when an Oracle LOB locator is initially retrieved as
; part of a query. Setting this can improve performance by reducing
; round-trips.
; https://php.net/oci8.prefetch-lob-size
; oci8.prefetch_lob_size = 0

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; https://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off

[PostgreSQL]
; Allow or prevent persistent links.
; https://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; https://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.
; https://php.net/pgsql.max-persistent
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
; https://php.net/pgsql.max-links
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; https://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0

; Log PostgreSQL backends Notice message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; https://php.net/pgsql.log-notice
pgsql.log_notice = 0

[bcmath]
; Number of decimal digits for all bcmath functions.
; https://php.net/bcmath.scale
bcmath.scale = 0

[browscap]
; https://php.net/browscap
;browscap = extra/browscap.ini

[Session]
; Handler used to store/retrieve data.
; https://php.net/session.save-handler
session.save_handler = files

; Argument passed to save_handler.  In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; The path can be defined as:
;
;     session.save_path = "N;/path"
;
; where N is an integer.  Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories.  This is useful if
; your OS has problems with many files in one directory, and is
; a more efficient layout for servers that handle many sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
;         You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
;         use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
;     session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
; https://php.net/session.save-path
;session.save_path = "/tmp"

; Whether to use strict session mode.
; Strict session mode does not accept an uninitialized session ID, and
; regenerates the session ID if the browser sends an uninitialized session ID.
; Strict mode protects applications from session fixation via a session adoption
; vulnerability. It is disabled by default for maximum compatibility, but
; enabling it is encouraged.
; https://wiki.php.net/rfc/strict_sessions
session.use_strict_mode = 0

; Whether to use cookies.
; https://php.net/session.use-cookies
session.use_cookies = 1

; https://php.net/session.cookie-secure
;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the be-all and end-all of session hijacking defense, but it's a good start.
; https://php.net/session.use-only-cookies
session.use_only_cookies = 1

; Name of the session (used as cookie name).
; https://php.net/session.name
session.name = PHPSESSID

; Initialize session on request startup.
; https://php.net/session.auto-start
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; https://php.net/session.cookie-lifetime
session.cookie_lifetime = 0

; The path for which the cookie is valid.
; https://php.net/session.cookie-path
session.cookie_path = /

; The domain for which the cookie is valid.
; https://php.net/session.cookie-domain
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it
; inaccessible to browser scripting languages such as JavaScript.
; https://php.net/session.cookie-httponly
session.cookie_httponly =

; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
; Current valid values are "Strict", "Lax" or "None". When using "None",
; make sure to include the quotes, as `none` is interpreted like `false` in ini files.
; https://tools.ietf.org/html/draft-west-first-party-cookies-07
session.cookie_samesite =

; Handler used to serialize data. php is the standard serializer of PHP.
; https://php.net/session.serialize-handler
session.serialize_handler = php

; Defines the probability that the 'garbage collection' process is started on every
; session initialization. The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; https://php.net/session.gc-probability
session.gc_probability = 1

; Defines the probability that the 'garbage collection' process is started on every
; session initialization. The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
; For high volume production servers, using a value of 1000 is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; https://php.net/session.gc-divisor
session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
; https://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
;       (see session.save_path above), then garbage collection does *not*
;       happen automatically.  You will need to do your own garbage
;       collection through a shell script, cron entry, or some other method.
;       For example, the following script is the equivalent of setting
;       session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
;          find /path/to/sessions -cmin +24 -type f | xargs rm

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; https://php.net/session.referer-check
session.referer_check =

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; https://php.net/session.cache-limiter
session.cache_limiter = nocache

; Document expires after n minutes.
; https://php.net/session.cache-expire
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users' security.
; Use this option with caution.
; - User may send URL contains active session ID
;   to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
;   in publicly accessible computer.
; - User may access your site with the same session ID
;   always using URL stored in browser's history or bookmarks.
; https://php.net/session.use-trans-sid
session.use_trans_sid = 0

; Set session ID character length. This value could be between 22 to 256.
; Shorter length than default is supported only for compatibility reason.
; Users should use 32 or more chars.
; https://php.net/session.sid-length
; Default Value: 32
; Development Value: 26
; Production Value: 26
session.sid_length = 26

; The URL rewriter will look for URLs in a defined set of HTML tags.
; <form> is special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. <form> tag's action attribute URL will not be modified
; unless it is specified.
; Note that all valid entries require a "=", even if no value follows.
; Default Value: "a=href,area=href,frame=src,form="
; Development Value: "a=href,area=href,frame=src,form="
; Production Value: "a=href,area=href,frame=src,form="
; https://php.net/url-rewriter.tags
session.trans_sid_tags = "a=href,area=href,frame=src,form="

; URL rewriter does not rewrite absolute URLs by default.
; To enable rewrites for absolute paths, target hosts must be specified
; at RUNTIME. i.e. use ini_set()
; <form> tags is special. PHP will check action attribute's URL regardless
; of session.trans_sid_tags setting.
; If no host is defined, HTTP_HOST will be used for allowed host.
; Example value: php.net,www.php.net,wiki.php.net
; Use "," for multiple hosts. No spaces are allowed.
; Default Value: ""
; Development Value: ""
; Production Value: ""
;session.trans_sid_hosts=""

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
;   4  (4 bits: 0-9, a-f)
;   5  (5 bits: 0-9, a-v)
;   6  (6 bits: 0-9, a-z, A-Z, "-", ",")
; Default Value: 4
; Development Value: 5
; Production Value: 5
; https://php.net/session.hash-bits-per-character
session.sid_bits_per_character = 5

; Enable upload progress tracking in $_SESSION
; Default Value: On
; Development Value: On
; Production Value: On
; https://php.net/session.upload-progress.enabled
;session.upload_progress.enabled = On

; Cleanup the progress information as soon as all POST data has been read
; (i.e. upload completed).
; Default Value: On
; Development Value: On
; Production Value: On
; https://php.net/session.upload-progress.cleanup
;session.upload_progress.cleanup = On

; A prefix used for the upload progress key in $_SESSION
; Default Value: "upload_progress_"
; Development Value: "upload_progress_"
; Production Value: "upload_progress_"
; https://php.net/session.upload-progress.prefix
;session.upload_progress.prefix = "upload_progress_"

; The index name (concatenated with the prefix) in $_SESSION
; containing the upload progress information
; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
; https://php.net/session.upload-progress.name
;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"

; How frequently the upload progress should be updated.
; Given either in percentages (per-file), or in bytes
; Default Value: "1%"
; Development Value: "1%"
; Production Value: "1%"
; https://php.net/session.upload-progress.freq
;session.upload_progress.freq =  "1%"

; The minimum delay between updates, in seconds
; Default Value: 1
; Development Value: 1
; Production Value: 1
; https://php.net/session.upload-progress.min-freq
;session.upload_progress.min_freq = "1"

; Only write session data when session data is changed. Enabled by default.
; https://php.net/session.lazy-write
;session.lazy_write = On

[Assertion]
; Switch whether to compile assertions at all (to have no overhead at run-time)
; -1: Do not compile at all
;  0: Jump over assertion at run-time
;  1: Execute assertions
; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
; Default Value: 1
; Development Value: 1
; Production Value: -1
; https://php.net/zend.assertions
zend.assertions = -1

; Assert(expr); active by default.
; https://php.net/assert.active
;assert.active = On

; Throw an AssertionError on failed assertions
; https://php.net/assert.exception
;assert.exception = On

; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
; https://php.net/assert.warning
;assert.warning = On

; Don't bail out by default.
; https://php.net/assert.bail
;assert.bail = Off

; User-function to be called if an assertion fails.
; https://php.net/assert.callback
;assert.callback = 0

[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
; https://php.net/com.typelib-file
;com.typelib_file =

; allow Distributed-COM calls
; https://php.net/com.allow-dcom
;com.allow_dcom = true

; autoregister constants of a component's typelib on com_load()
; https://php.net/com.autoregister-typelib
;com.autoregister_typelib = true

; register constants casesensitive
; https://php.net/com.autoregister-casesensitive
;com.autoregister_casesensitive = false

; show warnings on duplicate constant registrations
; https://php.net/com.autoregister-verbose
;com.autoregister_verbose = true

; The default character set code-page to use when passing strings to and from COM objects.
; Default: system ANSI code page
;com.code_page=

; The version of the .NET framework to use. The value of the setting are the first three parts
; of the framework's version number, separated by dots, and prefixed with "v", e.g. "v4.0.30319".
;com.dotnet_version=

[mbstring]
; language for internal character representation.
; This affects mb_send_mail() and mbstring.detect_order.
; https://php.net/mbstring.language
;mbstring.language = Japanese

; Use of this INI entry is deprecated, use global internal_encoding instead.
; internal/script encoding.
; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
;mbstring.internal_encoding =

; Use of this INI entry is deprecated, use global input_encoding instead.
; http input encoding.
; mbstring.encoding_translation = On is needed to use this setting.
; If empty, default_charset or input_encoding or mbstring.input is used.
; The precedence is: default_charset < input_encoding < mbstring.http_input
; https://php.net/mbstring.http-input
;mbstring.http_input =

; Use of this INI entry is deprecated, use global output_encoding instead.
; http output encoding.
; mb_output_handler must be registered as output buffer to function.
; If empty, default_charset or output_encoding or mbstring.http_output is used.
; The precedence is: default_charset < output_encoding < mbstring.http_output
; To use an output encoding conversion, mbstring's output handler must be set
; otherwise output encoding conversion cannot be performed.
; https://php.net/mbstring.http-output
;mbstring.http_output =

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
;       portable libs/applications.
; https://php.net/mbstring.encoding-translation
;mbstring.encoding_translation = Off

; automatic encoding detection order.
; "auto" detect order is changed according to mbstring.language
; https://php.net/mbstring.detect-order
;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another
; https://php.net/mbstring.substitute-character
;mbstring.substitute_character = none

; Enable strict encoding detection.
;mbstring.strict_detection = Off

; This directive specifies the regex pattern of content types for which mb_output_handler()
; is activated.
; Default: mbstring.http_output_conv_mimetypes=^(text/|application/xhtml\+xml)
;mbstring.http_output_conv_mimetypes=

; This directive specifies maximum stack depth for mbstring regular expressions. It is similar
; to the pcre.recursion_limit for PCRE.
;mbstring.regex_stack_limit=100000

; This directive specifies maximum retry count for mbstring regular expressions. It is similar
; to the pcre.backtrack_limit for PCRE.
;mbstring.regex_retry_limit=1000000

[gd]
; Tell the jpeg decode to ignore warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
; https://php.net/gd.jpeg-ignore-warning
;gd.jpeg_ignore_warning = 1

[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
; https://php.net/exif.encode-unicode
;exif.encode_unicode = ISO-8859-15

; https://php.net/exif.decode-unicode-motorola
;exif.decode_unicode_motorola = UCS-2BE

; https://php.net/exif.decode-unicode-intel
;exif.decode_unicode_intel    = UCS-2LE

; https://php.net/exif.encode-jis
;exif.encode_jis =

; https://php.net/exif.decode-jis-motorola
;exif.decode_jis_motorola = JIS

; https://php.net/exif.decode-jis-intel
;exif.decode_jis_intel    = JIS

[Tidy]
; The path to a default tidy configuration file to use when using tidy
; https://php.net/tidy.default-config
;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
; https://php.net/tidy.clean-output
tidy.clean_output = Off

[soap]
; Enables or disables WSDL caching feature.
; https://php.net/soap.wsdl-cache-enabled
soap.wsdl_cache_enabled=1

; Sets the directory name where SOAP extension will put cache files.
; https://php.net/soap.wsdl-cache-dir
soap.wsdl_cache_dir="/tmp"

; (time to live) Sets the number of second while cached file will be used
; instead of original one.
; https://php.net/soap.wsdl-cache-ttl
soap.wsdl_cache_ttl=86400

; Sets the size of the cache limit. (Max. number of WSDL files to cache)
soap.wsdl_cache_limit = 5

[sysvshm]
; A default size of the shared memory segment
;sysvshm.init_mem = 10000

[ldap]
; Sets the maximum number of open links or -1 for unlimited.
ldap.max_links = -1

[dba]
;dba.default_handler=

[opcache]
; Determines if Zend OPCache is enabled
;opcache.enable=1

; Determines if Zend OPCache is enabled for the CLI version of PHP
;opcache.enable_cli=0

; The OPcache shared memory storage size.
;opcache.memory_consumption=128

; The amount of memory for interned strings in Mbytes.
;opcache.interned_strings_buffer=8

; The maximum number of keys (scripts) in the OPcache hash table.
; Only numbers between 200 and 1000000 are allowed.
;opcache.max_accelerated_files=10000

; The maximum percentage of "wasted" memory until a restart is scheduled.
;opcache.max_wasted_percentage=5

; When this directive is enabled, the OPcache appends the current working
; directory to the script key, thus eliminating possible collisions between
; files with the same name (basename). Disabling the directive improves
; performance, but may break existing applications.
;opcache.use_cwd=1

; When disabled, you must reset the OPcache manually or restart the
; webserver for changes to the filesystem to take effect.
;opcache.validate_timestamps=1

; How often (in seconds) to check file timestamps for changes to the shared
; memory storage allocation. ("1" means validate once per second, but only
; once per request. "0" means always validate)
;opcache.revalidate_freq=2

; Enables or disables file search in include_path optimization
;opcache.revalidate_path=0

; If disabled, all PHPDoc comments are dropped from the code to reduce the
; size of the optimized code.
;opcache.save_comments=1

; If enabled, compilation warnings (including notices and deprecations) will
; be recorded and replayed each time a file is included. Otherwise, compilation
; warnings will only be emitted when the file is first cached.
;opcache.record_warnings=0

; Allow file existence override (file_exists, etc.) performance feature.
;opcache.enable_file_override=0

; A bitmask, where each bit enables or disables the appropriate OPcache
; passes
;opcache.optimization_level=0x7FFFBFFF

;opcache.dups_fix=0

; The location of the OPcache blacklist file (wildcards allowed).
; Each OPcache blacklist file is a text file that holds the names of files
; that should not be accelerated. The file format is to add each filename
; to a new line. The filename may be a full path or just a file prefix
; (i.e., /var/www/x  blacklists all the files and directories in /var/www
; that start with 'x'). Line starting with a ; are ignored (comments).
;opcache.blacklist_filename=

; Allows exclusion of large files from being cached. By default all files
; are cached.
;opcache.max_file_size=0

; Check the cache checksum each N requests.
; The default value of "0" means that the checks are disabled.
;opcache.consistency_checks=0

; How long to wait (in seconds) for a scheduled restart to begin if the cache
; is not being accessed.
;opcache.force_restart_timeout=180

; OPcache error_log file name. Empty string assumes "stderr".
;opcache.error_log=

; All OPcache errors go to the Web server log.
; By default, only fatal errors (level 0) or errors (level 1) are logged.
; You can also enable warnings (level 2), info messages (level 3) or
; debug messages (level 4).
;opcache.log_verbosity_level=1

; Preferred Shared Memory back-end. Leave empty and let the system decide.
;opcache.preferred_memory_model=

; Protect the shared memory from unexpected writing during script execution.
; Useful for internal debugging only.
;opcache.protect_memory=0

; Allows calling OPcache API functions only from PHP scripts which path is
; started from specified string. The default "" means no restriction
;opcache.restrict_api=

; Mapping base of shared memory segments (for Windows only). All the PHP
; processes have to map shared memory into the same address space. This
; directive allows to manually fix the "Unable to reattach to base address"
; errors.
;opcache.mmap_base=

; Facilitates multiple OPcache instances per user (for Windows only). All PHP
; processes with the same cache ID and user share an OPcache instance.
;opcache.cache_id=

; Enables and sets the second level cache directory.
; It should improve performance when SHM memory is full, at server restart or
; SHM reset. The default "" disables file based caching.
;opcache.file_cache=

; Enables or disables opcode caching in shared memory.
;opcache.file_cache_only=0

; Enables or disables checksum validation when script loaded from file cache.
;opcache.file_cache_consistency_checks=1

; Implies opcache.file_cache_only=1 for a certain process that failed to
; reattach to the shared memory (for Windows only). Explicitly enabled file
; cache is required.
;opcache.file_cache_fallback=1

; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
; Under certain circumstances (if only a single global PHP process is
; started from which all others fork), this can increase performance
; by a tiny amount because TLB misses are reduced.  On the other hand, this
; delays PHP startup, increases memory usage and degrades performance
; under memory pressure - use with care.
; Requires appropriate OS configuration.
;opcache.huge_code_pages=0

; Validate cached file permissions.
;opcache.validate_permission=0

; Prevent name collisions in chroot'ed environment.
;opcache.validate_root=0

; If specified, it produces opcode dumps for debugging different stages of
; optimizations.
;opcache.opt_debug_level=0

; Specifies a PHP script that is going to be compiled and executed at server
; start-up.
; https://php.net/opcache.preload
;opcache.preload=

; Preloading code as root is not allowed for security reasons. This directive
; facilitates to let the preloading to be run as another user.
; https://php.net/opcache.preload_user
;opcache.preload_user=

; Prevents caching files that are less than this number of seconds old. It
; protects from caching of incompletely updated files. In case all file updates
; on your site are atomic, you may increase performance by setting it to "0".
;opcache.file_update_protection=2

; Absolute path used to store shared lockfiles (for *nix only).
;opcache.lockfile_path=/tmp

[curl]
; A default value for the CURLOPT_CAINFO option. This is required to be an
; absolute path.
;curl.cainfo =

[openssl]
; The location of a Certificate Authority (CA) file on the local filesystem
; to use when verifying the identity of SSL/TLS peers. Most users should
; not specify a value for this directive as PHP will attempt to use the
; OS-managed cert stores in its absence. If specified, this value may still
; be overridden on a per-stream basis via the "cafile" SSL stream context
; option.
;openssl.cafile=

; If openssl.cafile is not specified or if the CA file is not found, the
; directory pointed to by openssl.capath is searched for a suitable
; certificate. This value must be a correctly hashed certificate directory.
; Most users should not specify a value for this directive as PHP will
; attempt to use the OS-managed cert stores in its absence. If specified,
; this value may still be overridden on a per-stream basis via the "capath"
; SSL stream context option.
;openssl.capath=

[ffi]
; FFI API restriction. Possible values:
; "preload" - enabled in CLI scripts and preloaded files (default)
; "false"   - always disabled
; "true"    - always enabled
;ffi.enable=preload

; List of headers files to preload, wildcard patterns allowed.
;ffi.preload=
</code>
++++

++++/etc/php82/php-fpm.d/www.conf|
<code>
; Start a new pool named 'www'.
; the variable $pool can be used in any directive and will be replaced by the
; pool name ('www' here)
[www]

; Per pool prefix
; It only applies on the following directives:
; - 'access.log'
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool

; Unix user/group of the child processes. This can be used only if the master
; process running user is root. It is set after the child process is created.
; The user and group can be specified either by their name or by their numeric
; IDs.
; Note: If the user is root, the executable needs to be started with
;       --allow-to-run-as-root option to work.
; Default Values: The user is set to master process running user by default.
;                 If the group is not set, the user's group is used.
user = nobody
group = nobody

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = 127.0.0.1:9000

; Set listen(2) backlog.
; Default Value: 511 (-1 on Linux, FreeBSD and OpenBSD)
;listen.backlog = 511

; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions. The owner
; and group can be specified either by name or by their numeric IDs.
; Default Values: Owner is set to the master process running user. If the group
;                 is not set, the owner's group is used. Mode is set to 0660.
;listen.owner = nobody
;listen.group = nobody
;listen.mode = 0660

; When POSIX Access Control Lists are supported you can set them using
; these options, value is a comma separated list of user/group names.
; When set, listen.owner and listen.group are ignored
;listen.acl_users =
;listen.acl_groups =

; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1

; Set the associated the route table (FIB). FreeBSD only
; Default Value: -1
;listen.setfib = 1

; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool processes will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Set the process dumpable flag (PR_SET_DUMPABLE prctl for Linux or
; PROC_TRACE_CTL procctl for FreeBSD) even if the process user
; or group is different than the master process user. It allows to create process
; core dump and ptrace the process for the pool user.
; Default Value: no
; process.dumpable = yes

; Choose how the process manager will control the number of child processes.
; Possible Values:
;   static  - a fixed number (pm.max_children) of child processes;
;   dynamic - the number of child processes are set dynamically based on the
;             following directives. With this process management, there will be
;             always at least 1 children.
;             pm.max_children      - the maximum number of children that can
;                                    be alive at the same time.
;             pm.start_servers     - the number of children created on startup.
;             pm.min_spare_servers - the minimum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is less than this
;                                    number then some children will be created.
;             pm.max_spare_servers - the maximum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is greater than this
;                                    number then some children will be killed.
;             pm.max_spawn_rate    - the maximum number of rate to spawn child
;                                    processes at once.
;  ondemand - no children are created at startup. Children will be forked when
;             new requests will connect. The following parameter are used:
;             pm.max_children           - the maximum number of children that
;                                         can be alive at the same time.
;             pm.process_idle_timeout   - The number of seconds after which
;                                         an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 5

; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: (min_spare_servers + max_spare_servers) / 2
pm.start_servers = 2

; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1

; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3

; The number of rate to spawn child processes at once.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
; Default Value: 32
;pm.max_spawn_rate = 32

; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;

; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500

; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following information:
;   pool                 - the name of the pool;
;   process manager      - static, dynamic or ondemand;
;   start time           - the date and time FPM has started;
;   start since          - number of seconds since FPM has started;
;   accepted conn        - the number of request accepted by the pool;
;   listen queue         - the number of request in the queue of pending
;                          connections (see backlog in listen(2));
;   max listen queue     - the maximum number of requests in the queue
;                          of pending connections since FPM has started;
;   listen queue len     - the size of the socket queue of pending connections;
;   idle processes       - the number of idle processes;
;   active processes     - the number of active processes;
;   total processes      - the number of idle + active processes;
;   max active processes - the maximum number of active processes since FPM
;                          has started;
;   max children reached - number of times, the process limit has been reached,
;                          when pm tries to start more children (works only for
;                          pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
;   pool:                 www
;   process manager:      static
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          62636
;   accepted conn:        190460
;   listen queue:         0
;   max listen queue:     1
;   listen queue len:     42
;   idle processes:       4
;   active processes:     11
;   total processes:      15
;   max active processes: 12
;   max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
;   http://www.foo.bar/status
;   http://www.foo.bar/status?json
;   http://www.foo.bar/status?html
;   http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example:
;   http://www.foo.bar/status?full
;   http://www.foo.bar/status?json&full
;   http://www.foo.bar/status?html&full
;   http://www.foo.bar/status?xml&full
; The Full status returns for each process:
;   pid                  - the PID of the process;
;   state                - the state of the process (Idle, Running, ...);
;   start time           - the date and time the process has started;
;   start since          - the number of seconds since the process has started;
;   requests             - the number of requests the process has served;
;   request duration     - the duration in µs of the requests;
;   request method       - the request method (GET, POST, ...);
;   request URI          - the request URI with the query string;
;   content length       - the content length of the request (only with POST);
;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
;   script               - the main script called (or '-' if not set);
;   last request cpu     - the %cpu the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because CPU calculation is done when the request
;                          processing has terminated;
;   last request memory  - the max amount of memory the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because memory calculation is done when the request
;                          processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
;   ************************
;   pid:                  31330
;   state:                Running
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          63087
;   requests:             12808
;   request duration:     1250261
;   request method:       GET
;   request URI:          /test_mem.php?N=10000
;   content length:       0
;   user:                 -
;   script:               /home/fat/web/docs/php/test_mem.php
;   last request cpu:     0.00
;   last request memory:  0
;
; Note: There is a real-time FPM status monitoring sample web page available
;       It's available in: /usr/share/php82/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status

; The address on which to accept FastCGI status request. This creates a new
; invisible pool that can handle requests independently. This is useful
; if the main pool is busy with long running requests because it is still possible
; to get the status before finishing the long running requests.
;
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Default Value: value of the listen option
;pm.status_listen = 127.0.0.1:9001

; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping

; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong

; The access log file
; Default: not set
;access.log = log/php82/$pool.access.log

; The access log format.
; The following syntax is allowed
;  %%: the '%' character
;  %C: %CPU used by the request
;      it can accept the following format:
;      - %{user}C for user CPU only
;      - %{system}C for system CPU only
;      - %{total}C  for user + system CPU (default)
;  %d: time taken to serve the request
;      it can accept the following format:
;      - %{seconds}d (default)
;      - %{milliseconds}d
;      - %{milli}d
;      - %{microseconds}d
;      - %{micro}d
;  %e: an environment variable (same as $_ENV or $_SERVER)
;      it must be associated with embraces to specify the name of the env
;      variable. Some examples:
;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
;  %f: script filename
;  %l: content-length of the request (for POST request only)
;  %m: request method
;  %M: peak of memory allocated by PHP
;      it can accept the following format:
;      - %{bytes}M (default)
;      - %{kilobytes}M
;      - %{kilo}M
;      - %{megabytes}M
;      - %{mega}M
;  %n: pool name
;  %o: output header
;      it must be associated with embraces to specify the name of the header:
;      - %{Content-Type}o
;      - %{X-Powered-By}o
;      - %{Transfert-Encoding}o
;      - ....
;  %p: PID of the child that serviced the request
;  %P: PID of the parent of the child that serviced the request
;  %q: the query string
;  %Q: the '?' character if query string exists
;  %r: the request URI (without the query string, see %q and %Q)
;  %R: remote IP address
;  %s: status (response code)
;  %t: server time the request was received
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;      The strftime(3) format must be encapsulated in a %{<strftime_format>}t tag
;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
;  %T: time the log has been written (the request has finished)
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;      The strftime(3) format must be encapsulated in a %{<strftime_format>}t tag
;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
;  %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{milli}d %{kilo}M %C%%"

; A list of request_uri values which should be filtered from the access log.
;
; As a security precuation, this setting will be ignored if:
;     - the request method is not GET or HEAD; or
;     - there is a request body; or
;     - there are query parameters; or
;     - the response code is outwith the successful range of 200 to 299
;
; Note: The paths are matched against the output of the access.format tag "%r".
;       On common configurations, this may look more like SCRIPT_NAME than the
;       expected pre-rewrite URI.
;
; Default Value: not set
;access.suppress_path[] = /ping
;access.suppress_path[] = /health_check.php

; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/php82/$pool.slow.log

; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0

; Depth of slow log stack trace.
; Default Value: 20
;request_slowlog_trace_depth = 20

; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0

; The timeout set by 'request_terminate_timeout' ini option is not engaged after
; application calls 'fastcgi_finish_request' or when application has finished and
; shutdown functions are being called (registered via register_shutdown_function).
; This option will enable timeout limit to be applied unconditionally
; even in such cases.
; Default Value: no
;request_terminate_timeout_track_finished = no

; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
;       possible. However, all PHP paths will be relative to the chroot
;       (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =

; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
;chdir = /var/www

; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environment, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes

; Decorate worker output with prefix and suffix containing information about
; the child that writes to the log and if stdout or stderr is used as well as
; log level and time. This options is used only if catch_workers_output is yes.
; Settings to "no" will output data as written to the stdout or stderr.
; Default value: yes
;decorate_workers_output = no

; Clear environment in FPM workers
; Prevents arbitrary environment variables from reaching FPM worker processes
; by clearing the environment in workers before env vars specified in this
; pool configuration are added.
; Setting to "no" will make all environment variables available to PHP code
; via getenv(), $_ENV and $_SERVER.
; Default Value: yes
;clear_env = no

; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; execute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5 .php7

; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp

; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
;   php_value/php_flag             - you can set classic ini defines which can
;                                    be overwritten from PHP call 'ini_set'.
;   php_admin_value/php_admin_flag - these directives won't be overwritten by
;                                     PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.

; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr)

; Default Value: nothing is defined by default except the values in php.ini and
;                specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/php82/$pool.error.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
</code>
++++
====nginx fastcgi setup====
++++/etc/nginx/http.d/fastcgi_test.conf|
<code>location ~ [^/]\.php(/|$) {
    fastcgi_split_path_info ^(.+?\.php)(/.*)$;
    if (!-f $document_root$fastcgi_script_name) {
        return 404;
    }

    # Mitigate https://httpoxy.org/ vulnerabilities
    fastcgi_param HTTP_PROXY "";

    #fastcgi_pass 127.0.0.1:9000;
    fastcgi_pass /sock/php-fpm.sock
    fastcgi_index index.php;

    # include the fastcgi_param setting
    include /etc/nginx/fastcgi.conf;

    # SCRIPT_FILENAME parameter is used for PHP FPM determining
    #  the script name. If it is not set in fastcgi_params file,
    # i.e. /etc/nginx/fastcgi_params or in the parent contexts,
    # please comment off following line:
    # fastcgi_param  SCRIPT_FILENAME   $document_root$fastcgi_script_name;
}</code>

If you’re using unix socket change fastcgi_pass to: ''fastcgi_pass unix:/var/run/php-fpm.sock;''

++++

++++/var/www/test/test.php|
<code>
<?php var_export($_SERVER)?>
</code>
++++

++++/var/www/test/phpinfo.php|
<code>
<?php phpinfo();?>
</code>
++++

====Some reference links====
  *NGINX Docs
    *[[https://nginx.org/en/docs/beginners_guide.html|Beginner’s Guide]]
    *[[https://docs.nginx.com/nginx/admin-guide/monitoring/logging/|Configuring Logging]]
    *[[https://www.nginx.com/resources/wiki/start/topics/examples/fullexample2/|Another Full Example nginx.conf]]
    *[[https://www.nginx.com/resources/wiki/start/topics/examples/phpfcgi/#connecting-nginx-to-php-fpm|PHP FastCGI Example]]
  *php
    *[[https://www.php.net/|php]
    *[[https://www.php.net/manual/en/|PHP Manual]]
  *digitalocean
    *[[https://www.digitalocean.com/community/tutorials/php-fpm-nginx|How to Configure PHP-FPM with NGINX]]
    *[[https://www.digitalocean.com/community/tutorials/understanding-and-implementing-fastcgi-proxying-in-nginx|Understanding and Implementing FastCGI Proxying in Nginx]]
    *[[https://www.digitalocean.com/community/tutorials/nginx-location-directive|Tutorial: Nginx location directive examples]]
  *Stackoverflow
    *[[https://stackoverflow.com/questions/25970711/what-is-the-difference-between-nginx-daemon-on-off-option|What is the difference between nginx daemon on/off option?]]
    *[[https://stackoverflow.com/questions/24208139/nginx-php-fpm-file-not-found|nginx + php-fpm = File not found]]
    *[[https://stackoverflow.com/questions/11954255/how-to-set-index-html-as-root-file-in-nginx|How to set index.html as root file in Nginx?]]
    *[[https://stackoverflow.com/questions/47056062/how-to-connect-nginx-to-php-fpm-using-unix-socket-in-docker|how to connect nginx to php-fpm using unix socket in docker]]
    *[[https://stackoverflow.com/questions/64137225/how-to-setup-a-single-nginx-server-with-multiple-php-fpm-docker-containers|how to setup a single nginx server with multiple php-fpm docker containers]]
    *[[https://stackoverflow.com/questions/49754286/multiple-images-one-dockerfile|Multiple images, one Dockerfile]]
    *[[https://stackoverflow.com/questions/29905953/how-to-correctly-link-php-fpm-and-nginx-docker-containers?rq=4|How to correctly link php-fpm and Nginx Docker containers?]]
    *[[https://stackoverflow.com/questions/44757189/where-is-php7-0-fpm-sock-located|Where is php7.0-fpm.sock located]]
    *[[https://stackoverflow.com/questions/35367676/php-fpm-doesnt-create-sock-file|php-fpm doesn't create .sock file]]
    *[[https://stackoverflow.com/questions/48356981/nginx-index-404-not-found|NGINX Index 404 Not Found]]
  *Miscellaneous:
    *[[https://www.tecmint.com/connect-nginx-to-php-fpm/|How to Connect NGINX to PHP-FPM Using UNIX or TCP/IP Socket]]
    *[[https://www.linode.com/docs/guides/serve-php-php-fpm-and-nginx/|Serve PHP with PHP-FPM and NGINX]]
    *[[https://www.delftstack.com/howto/php/docker-php-fpm/|Set Up PHP-FPM and Nginx Docker Containers]]
    *[[https://marc.it/dockerize-application-with-nginx-and-php8/|Dockerize your PHP application with Nginx and PHP8-FPM]]
    *[[https://www.theserverside.com/blog/Coffee-Talk-Java-News-Stories-and-Opinions/Nginx-PHP-FPM-config-example|How to setup PHP on Nginx with fastCGI (PHP-FPM) example]]
    *[[https://www.plesk.com/blog/various/nginx-configuration-guide/|NGINX Configuration Guide]]
    *[[https://levelup.gitconnected.com/containerizing-nginx-php-fpm-on-alpine-linux-953430ea6dbc|Containerizing nginx + PHP FPM on Alpine Linux]]
    *[[https://medium.com/@shrikeh/setting-up-nginx-and-php-fpm-in-docker-with-unix-sockets-6fdfbdc19f91|Setting up nginx and PHP-FPM in Docker with Unix Sockets]]
    *[[https://www.librebyte.net/en/systems-deployment/how-to-install-php-php-fpm-in-alpine-linux/|How to install PHP, PHP-FPM in Alpine Linux?]]
    *[[https://phoenixnap.com/kb/linux-socket|How Linux Uses Sockets]]
    *[[https://www.sitepoint.com/docker-php-development-environment/|Setting Up a Modern PHP Development Environment with Docker]]
    *[[https://dev.to/texe/how-to-run-nginx-and-php-in-docker-5eoi|How to run Nginx and PHP in Docker]]
    *[[https://github.com/TrafeX/docker-php-nginx|TrafeX/docker-php-nginx]]

<- docker_notes:/diun-ntfy|Back ^ docker_notes:index|Start page ^ |End->