Search
You can find the results of your search below.
Fulltext results:
- Router Miscellaneous
- /baumkp/algo:/data --name=algo mutemule/algo" to create and run image --cap-drop All [Drop all Linux e... is assumed that the container has been previously created/run and is available to be started at boot. ''s... ady exists, ''sudo mkdir -p /var/log/journal'' to create directory if not existing, and ''sudo rm -R /var/... devices]], [[https://www.cyberciti.biz/faq/how-to-create-bridge-interface-ubuntu-linux/|How To Setup Bridg
- NFTables Configuration
- llowing is my NFTables router configuration file. Create the following file called: "router.nft". Dont fo... en_ports { ++ | \\ + <color #202000/#F0F0E0> This creates a set of type inet_service (port number or range... n_ports { ++ | \\ + <color #202000/#F0F0E0> This creates a set of type inet_service (port number or range
- Debian / Ubuntu Network Setup
- d, or increase its metric, but to no avail. So I created the following systemd service to perform this fu... ction on start-up after the network was up."\\ To create and edit the service: ''sudo systemctl edit --for
- ISP PPPoE Network Setup
- e this blank.</fs> Next a peer fille needs to be created for the connection. These files are located in "... ]</fs>. ====PPPoE Startup==== Systemd service to create interface and start ppoe service, below: ''sudo v
- DHCP / DNS Setup
- tra value by tracking you. ====rndc-key==== Next create a cryptographic key file using ''sudo /usr/sbin/r
- ISP IPoE DHCP Setup Notes
- cations==== When using pppoe a separate device is created that can be used to filter against. When using
- NFTables IP Control
- the script files to make them executable I then created a cron job to run the script as required every e
- Router VM
- er client binaries *''virtinst'' - utilities to create and edit virtual machines *''libspice-server1''