Search
You can find the results of your search below.
Fulltext results:
- Docker nginx / php notes @docker_notes
- connectivity instead of socket file. To run and control nginx. * ''nginx'' to run. * ''nginx -h'' to ... Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; The maximum number of processes FPM will fork. This has been designed to control ; the global number of processes when using dynam... lity reasons. ; Note that this directive does not control the <?= shorthand tag, which can be ; used regard
- Home Sprinkler Setup Notes @personal
- when purchased: *The location of the sprinkler control valves was unknown. Of the 8 station control valves, one valve was well underground, 3 were mostly undergr... had already modified and repaired the piping and control valve wiring to allow for the overgrown plants and trees. *The control valve wiring only used old fashion car crimp fitt
- NFTables Configuration @linux_router
- + \\ <tab6> \\ <tab6><color blue> # The set controllist is used to dynamically add IP address(es) to a timed drop list for LAN access control </color> ++ | \\ +<color #202000/#F0F0E0> This ha... il at the following link: [[linux_router:nftables_control]], also see wiki.nftables on<tab1> [[https://wiki... e.html#lbAS|Sets]].</color> ++ \\ <tab6> set controllist {\\ <tab9> type ipv4_addr\\ <tab9>
- Sprinkler Solenoid 24VAC Woes @project
- {{tag>sprinkler inductor controller solenoid valve "solenoid valve"}} ======Sprinkler Solenoid 24VAC Woes==... d more robust sheathed multi core wiring and node control boxes with LED lights that confirmed power to eac... Sprinkler V2.0 since about 2014, this is a 24VAC controller. I reached out to the solenoid valve supplier ... ems. They indicated that some of the open source controllers were DC or perhaps allowing DC offset on to t
- IPMI CLI Tools @home_server:home_server_setup:other_services
- will save you purchasing a separate remote power control unit and SOL will save you purchasing an IP KVM, ... lly more expensive than those without *The IPMI controller does use power, about 4-6W *The IPMI is anot... *IPMI v1.0 - Autonomous access, logging and control. IPMI messaging command sets, sensor data records... ial Over LAN enabling console redirection, access control, enhanced authentication, packet encryption using
- Router Hardware @linux_router
- wer slightly lower than the J1900. (The Intel LAN controllers are also the more modern ones). This unit als... board video and mouse, BMC = Baseboard management controller. The remote KVM and IPMI, BMC are not used of... , however a BMC with KVM allows full on/off/reset control and remote access to GRUB and terminal that SSH d... o the only graphics capacity was on the BMC video controller. The Ubuntu drivers defaulted to this basic BM
- Docker - DHCP Server @docker_notes
- m ISC.|?| |isc-kea-shell|Text client for Kea DHCP Control Agent.|?| ====Network Ports==== From IANA Servic... Bootstrap Protocol Client (DHCP)</code> The Kea Control Agent uses port 8000 by default, but that value c... ry server that hosts a Kea DHCP service and a Kea Control Agent. ====Docker Network Type==== This is a goo... nfusing when using Docker mounted directories. To control which dhcp4 config file to run (basic or plus):
- Docker Deluge Image / Service @docker_notes
- ux built-in commands. The main init and services control needs to be added with packages tini and openrc. ... e an openrc script to allow the application to be controlled by the build in system. ---- =====VPN setup... ations can be found here [[https://privatevpn.com/control-panel|PrivateVPN config panel]]. ====OpenVPN set... it'' in the shell which attempts to exit, or type control p then control q. (As I am not running an ssh ser
- Router Miscellaneous @linux_router
- 21 {tcp, udp, sctp} File Transfer Protocol [Control] ssh 22 {tcp, udp, sctp} The Secure Shell... 990 {tcp, udp} File Transfer Protocol [Control] imaps 993 {tcp, udp} imap4 protocol o... OpenVPN </code> Notes: -TCP = Transmission Control Protocol -UDP = User Datagram Protocol -SCTP = Stream Control Transmission Protocol -The Bootstrap Protocol
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- e:userpassword</code> Use systemd systemctl from control of the deamon: ''sudo systemctl status rsync.serv... verbose 2 # Same as "verbose" above, but controls the amount of data sent to the # logfile, if one... file you specify. The # amount of data written is controlled by the "loglevel" parameter. # logfile ... verbose 2 # Same as "verbose" above, but controls the amount of data sent to the # logfile, if one
- IPMI Console Setup @home_server:home_server_setup:other_services
- er serial tty to the BMC network) -tty terminal controls (e.g. size) An important reference to setting t... ol terminal the following commands can be used to control the sol connection: * ~? : help * ~. : to t... ed immediately after new line. =====tty terminal controls===== The tty serial of IPMI connection is not a... full headless remote functionality of machine in control. IPMI is know for not having strong security.
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- s. NUT is an open source network monitoring and control system. I use a Powershield Commander RT PSCRT110... aemon based utility that can monitor performance, control as necessary and report on abnormal operation. Un... scription=Network UPS Tools - power device driver controller After=network-online.target [Service] ExecSta... ork UPS Tools - power device monitor and shutdown controller After=nut-server.service [Service] ExecStart=
- Docker mailserver @docker_notes
- SPmail uses this user for database administrative control. *The mailserver user was linked to 127.0.0.0 a... l delegate that to Dovecot as it allows us better control. All that Postfix needs to know is whether an em... le.org. ====postfix start/stop==== Basic postfix control are: *''postfix start'' to start postfix in bac... erating status It looks a shell script is used to control Postfix, in Alpine is is located ++here|/usr/libe
- My Home IT Setup @home_server:home_server_setup
- ttps://opensprinkler.com/|Opensprinkler sprinkler controller]], that is probably the best network interfaced sprinkler controller available, both for home and some commercial ... attempt I used sub-standard wiring. I placed the controller into a weather proofing panel. Upon inspectio... but not subject to rain had corroded some of the controller contacts, particularly the RJ45 network ones.
- BASH Customisation @home_server:home_server_setup:other_services
- following command gives an example of time format control on ls command. %%ls -l --time-style="+%Y-%m-%d %... [https://opensource.com/article/20/6/bash-history-control|Make Bash history more useful with these tips]] ... meout in Linux]] ------- =====Display Brightness Control===== Strangely XFCE does not seem have and any kind of screen brightness control built in. There also seems to be no optional ext