Search
You can find the results of your search below.
Fulltext results:
- Rsync @home_server:home_server_setup:other_services
- ith password-less access, discussed earlier. =====Configuration of ssh to Eliminate Password Prompt and Warning Messages===== Proper configuration of ssh will be needed to assure routine warning m... o prompt for host key checks, then we can add the configuration to our script. This can be done with OpenSSH’s -o... user@host /usr/bin/hostname -s</code> To set this configuration system-wide, place these entries in ''ssh_config'
- Network Setup
- sudo apt install bridge-utils'' Edit the network configuration file: ''/etc/network/interfaces'' as follows: <c... ng only one NIC I propose to use 2 NICs in bonded configuration and also use bridging to allow server virtual mac... ed: ''sudo apt install bridge-utils'' The bonded configuration needs ifenslave utility loaded: ''sudo apt instal... eth0) LAN2(eth1) VGA </code> Edit the network configuration file: ''/etc/network/interfaces'' as follows: <co
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- -hcl.html|Hardware compatibility list]]. =====NUT Configuration Files===== NUT can be installed by ''sudo apt install nut''. The configuration files are located at ''/etc/nut'' : <code> nu... ured to operate with systemd. After updating the configuration file restart the computer and confirm if working.... o longer relevant. Interestingly the NUT systemd configuration is still based upon similar systemd scripts and c
- Conky @home_server:home_server_setup:other_services
- isualized the colors. ====Debian 11 Server Conky Configuration==== Conky uses a configuration file location in ''~/.conkyrc''. Conky can be configured in an many ways. I'm using the following configuration on my main server (Debian 11) : ++++Debian Server... color$font </code> ++++ ====Manjaro Desktop Conky Configuration==== I used the following on my Manjaro desk top:
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- ow and I am concerned with reliability. Rsnapshot configuration is overly complex, with strange requirements such... #################### # rsnapshot.conf - rsnapshot configuration file # ##########################################... home/ </code> **Remember! //!The rsnapshot configuration file separates with tabs not spaces!//** ++++ '... #################### # rsnapshot.conf - rsnapshot configuration file # ##########################################
- KVM Setup
- IP address allowed the VM NFS to work without any configuration changes, so remains working on both the new and o... ockets configured. Further to this KVM allows for configuration of socket|Cores|Threads. See the picture below. ... -12_19-58-17.png?400|}} BTW //my server hardware configuration is: 1 Socket, 8 Cores (/Socket) & 1 Thread(/Core)... r shutdown *''edit VM_name'' to edit the XML configuration file of the VM names VM_name. *''sudo virsh
- BASH Customisation @home_server:home_server_setup:other_services
- tag> linux bash alias tar .bash_aliases configure configuration bashrc command script .bashrc history sudo visudo... BASH Customisation====== The standard BASH colour configuration uses a blue colour for listing directories (ls) w... ave decided to change it. The personal BASH user configuration file is: ''~/.bashrc''. Simply add the following ... user defined?) ====bash-it / oh-my-bash==== bash configuration utilities I have not tried yet. References: *[[
- IPMI Console Setup @home_server:home_server_setup:other_services
- etup information. I adjusted my grub boot loader configuration as follows ''sudo vim /etc/default/grub'': <code ... ns in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_TIMEOUT_STYLE=hidden GRUB_... pdate the grub boot loader based upon the updated configuration file. The main computer then needs to be reboote... er grub login. To resolve I modified the systemd configuration fill as follows: ''sudo vim /lib/systemd/system/s
- samba @home_server:home_server_setup:other_services
- as main Linux log. ++++smb.conf| <code># # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual pa... the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced wi... es name..... * ''testparm'' will list the samba configuration parameters. ====Links==== * [[https://wiki.deb
- Set Up and Ubuntu APT Cache @home_server:home_server_setup:other_services
- her-ng web page: "http://192.168.1.1:3142" *The configuration file is ''sudo vim /etc/apt-cacher-ng/acng.conf''... r/cache/apt-cacher-ng'' and can be changed in the configuration file. *The default log directory is: ''/var/log/apt-cacher-ng'' and can be changed in the configuration file. *The clients can access apt-cacher-ng cac
- NFS @home_server:home_server_setup:other_services
- decided to place my notes here to help me with my configuration, as there are a number of nuances that such notes... needs and do not need to be modified.// To apply configuration changes ''sudo systemctl restart nfs-server.servi... nfs-common'' to install the nfs client To apply configuration changes ''sudo systemctl restart nfs-client.targe
- Manjaro Setup Notes @home_server:home_server_setup:other_services
- log is at ''/var/log/cups/error_log''\\ The CUPS configuration file is at ''/etc/cups/cupsd.conf''\\ [[https://u... stall for Conky in Manjaro. I adjusted my server configuration file to suit, ''sudo vim ~/.config/conky/conky.co
- fsck - file system check
- *To check ext2/3/4 file system information and configuration of a partition ''sudo tune2fs -l /dev/sdX'' ++++
- VNC Server
- mand ''ps -A | grep vnc'' *The vncserver startup configuration file: ''vim ~/.vnc/xstartup'' *I set up cron to
- Fail2Ban @home_server:home_server_setup:other_services
- ail.conf /etc/fail2ban/jail.local'' copy the main configuration file to a local file to be modified. It is recom