Search
You can find the results of your search below.
Fulltext results:
- DHCP / DNS Setup
- //www.digitalocean.com/community/tutorials/how-to-configure-bind-as-a-private-network-dns-server-on-debian-9|How To Configure BIND as a Private Network DNS Server on Debian 9]]\\ *[[https://computingforgeeks.com/configure-slave-bind-dns-server-on-debian/|Configure BIND Slave DNS Server on Debian 11]] *[[https://www.l
- NFTables Configuration
- ag>linux router NFtables firewall}} =====NFTables Configuration===== The best reference for nftables is... r a router [[https://stosb.com/blog/explaining-my-configs-nftables/|Explaining My Configs: nftables]]. After a lot of experimenting the following is my NFTables router configuration file. Create the following file called:
- Router Miscellaneous
- host is also used as a router. Docker host can be configured not to update iptables on the host, in this... [[https://forums.docker.com/t/docker-and-iptables-configuration-startup/904|Docker and iptables configuration @startup]] [[https://fralef.me/docker-and-iptab... les]] [[https://serverfault.com/questions/868926/configure-iptables-for-docker-manually-and-allow-inter
- Debian / Ubuntu Network Setup
- udo apt install bridge-utils''. Edit the network configuration file: ''/etc/network/interfaces'' as fol... ''ip a'' and ''ip r'' to analyse current network configuration *Use ''sudo journalctl -xeu networking... ge the router firewall must also be appropriately configured.** The remaining 3 NICs are setup in bridg... the router LAN on 192.168.1.1 . See the Netplan configuration below: ++++''sudo vim /etc/netplan/netw
- ISP PPPoE Network Setup
- LPPPoE. PPPD manual page]]. Another reference is Confirm Blog [[https://blog.confirm.ch/using-pppoe-on-linux/|Using PPPoE on Linux]]. Some other references:... er, isc-dhcp-server6] software for the moment and configure later. *''sudo systemctl disable bind9'' ... hcp-server'' ====Set up PPPoE==== "chap-secrets" configuration Edit the chap-secrets file, ''sudo vim
- Router Hardware
- e on a VM as I do not like the amount of IPtables configuration it does on its host. This would interfere with my NFTables router firewall configuration, if on the same host. I looked at the v... the unit can be remotely off-site operated, with configuration options for auto on at power up and hear... oard options (In this case under Advanced-Chipset Configuration-North Bridge-Intel IGD Configuration). T
- IPv6 Setup Notes
- *https://serverfault.com/questions/297714/how-to-configure-radvd-dhcpd6-routing-and-64-subnet-based-on-... *http://sophiedogg.com/radvd-and-dhcpd6-server-configuration-for-dynamic-dns/ *https://superuser.co... rnetsociety.org/resources/deploy360/2014/tutorial-configuring-ipv6-for-linux/ Commands: *''sudo vim /e... n-a-dual-stack-network *https://blog.marquis.co/configuring-a-dual-stacked-dhcp-server/ *http://soph
- Linux Router Background
- My ISP sold their business on and when I tried my configuration with the new ISP it worked immediately. ... roblem went away. *Access to the modem / router configuration is very difficult when my family members... good environment to be testing new equipment and configurations. (Production versus development environ... ability to get time and motivation to perform the configuration and testing and finally the documentatio
- IPTables Configuration
- ag>linux router firewall IPTables}} =====IPTables Configuration===== I went down the route of attempting to configure the firewall using NFtables. NFTables has so... untu 16.04 was released in 2015-11, and during my configuration I found some bugs. Also mss clamping is ... alignment and untested.//** ====Sample IPTables configuration==== Edit iptables configuration file: '
- NFTables IP Control
- amed set controllist *''sudo vim /etc/nftables.conf'' : to edit the current NFTables configuration *''sudo systemctl restart nftables'' to restart with the current nftables configuration *''status'' to list current running... *''start'' to start nftables with the current configuration *''stop'' to stop nftables *''
- ISP IPoE DHCP Setup Notes
- dhcp is used on most networks to allow automatic configuration of network IP addresses and most IP traf... RJ45 ethernet interface call eno1. In my netplan configuration file, ''/etc/netplan/network.yaml'', +++... : ether State: routable (configured) Alternative Names: enp2s0
- Router VM
- on this machine are, all bare metal: * Network configuration (of 4 x 1 GB/s ethernet ports) * Acc... the hypervisors *''libvirt-daemon-system'' - configuration files to run the libvirt daemon as a sys
- Basic Netfilter Function Block Diagram
- ====ICMP Filtering==== There seems to be a lot of conflicting information on filtering ICMP, too much!.
- Router Basic Debian Server Setup
- the update failed. I then managed to corrupt the configuration files on the router..... Hopefully these