Search
You can find the results of your search below.
Fulltext results:
- Router Miscellaneous @linux_router
- -docker.sh " to setup Algo. **Start container at boot:** It is assumed that the container has been pre... sly created/run and is available to be started at boot. ''sudo vim /etc/systemd/system/algo.service'' <... 53 {tcp, udp} Domain Name Server (DNS) bootps 67 {tcp, udp} Bootstrap Protocol Server (DHCP) bootpc 68 {tcp, udp} Bootstrap P
- Router Hardware @linux_router
- as my primary.++++ ++++Forcing Display option at boot in Ubuntu| ====Forcing Display option at boot in Ubuntu==== **Note this method did not work in Ubuntu 1... e by setting the "nomodeset" option into the grub bootloader. This can be done by editing the grub bootloader during boot up, a one off solution and by making
- IPMI Console Setup @home_server:home_server_setup:other_services
- to this are: -Setting up Linux to redirect main boot terminal tty interface to use the serial port -Setup the console redirection in the Grub boot loader of Linux, so the main console window is di... and start the Linux serial terminal service upon boot -BMC IPMI Client Setup (Using the BMC IPMI inte... y number used, in the above example, 1. ====Grub Bootloader Setup==== After this Linux must be setup to
- NFTables Configuration @linux_router
- only use TCP!</color>\\ <tab6><color blue> # bootps, port 67 and bootpc, port 68 are for DHCP on both TCP and UDP, but we only use UDP!</color>\\ <tab6>... color><color #000060/#F0F0FF> udp dport { domain, bootps, bootpc, 667, 953} counter accept</color> ++ | + <color #202000/#F0F0E0>This is used to accept speci
- SSH Notes @home_server:home_server_setup:other_services
- indall('..', '%012x' % uuid.getnode()))}") # Boot Time print("="*40, "Boot Time", "="*40) boot_time_timestamp = psutil.boot_time() bt = datetime.fromtimestamp(boot_time_timestamp) print(f"Bo
- systemd Stuff @home_server:home_server_setup:other_services
- s://www.tecmint.com/systemd-analyze-monitor-linux-bootup-performance/|systemd-analyze – Find System Boot-up Performance Statistics in Linux]] =====Journalctl... also ensure log files are available from previous boots.\\ \\ ''sudo systemctl force-reload systemd-jour... inputs: *''sudo journalctl -b'' to see current boot journal only use ''-b -1'' to see last boot entri
- KVM Setup @home_server:home_server_setup
- one server could be running at a time using EUFI boot options. I ran into the following problems. * B... ince circa 2021. Just no need. I do have a dual boot on my main desk top that I default to Debian testing and can boot to Windows 11 when I need to use Windows based so... longer and dependent upon the hardware used. *Boot your VM and verify all is working. *When you
- Manjaro Setup Notes @home_server:home_server_setup:other_services
- sed_perc /}% ${color8}${fs_bar /}$color #${color0}boot:$color ${fs_used /boot} / ${fs_size /boot} #${fs_used_perc /boot}% ${color8}${fs_bar /boot}$color #${color0}home:$color ${fs_used /home} / ${fs_s
- Docker - DHCP Server @docker_notes
- names-port-numbers.xhtml|Number Registry]]: <code>bootps 67 {tcp, udp} Bootstrap Protocol Server (DHCP) bootpc 68 {tcp, udp} Bootstrap Protocol Client (DHCP)</code> The Kea Control Agent uses port 800
- dokuwiki setup notes @home_server
- | Enabled | | [[http://www.dokuwiki.org/plugin:bootswrapper|Bootstrap Wrapper Plugin]] | Bootstrap Wrapper for DokuWiki | <fs x-small>by Giuseppe Di Terlizzi</fs> |
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- ===== =====dmesg==== ''sudo dmesg'' lists the OS boot messages between grub and os up. =====systemd====... / stop / restart / status) (enable / disable for boot control) *List current Systemd operating uni... e the grep statement as required. *Check the boot journal: ''sudo journalctl -xe'' *To check runn
- NUT (Network UPS Tools) Setup @home_server:home_server_setup:other_services
- ystem mounted in RAM that must be recreated every boot. Inspection of the init.d NUT files show they inc... / stop / restart / status) (enable / disable for boot control) *List current Systemd operating uni... e the grep statement as required. *Check the boot journal: ''journalctl -xe'' *To check running p
- Docker-Compose @docker_notes
- put up with this before fixing it. Every time I booted the main server VM Traefik would fail. All the... stemctl daemon-reload'', however I wanted to test boot performance, so a reboot is necessary anyway.) Ex
- KPTree - Email Server Setup @home_server
- 'lsblk'' to list all drive * To allow automatic boot of nfs clients: sudo vim /etc/fstab * ''192.1... / stop / restart / status) (enable / disable for boot control) <- home_server:index|prev page ^ home_s
- KPTree - MSWindows Setup @home_server
- e Windows on my main desk top machine, it is dual boot with Debian/XFCE. I am using Debian almost exclusivly now. The BIOS based dual boot works well, I have it defaulting to Debian. I do