address

Search

You can find the results of your search below.

NFTables Configuration
39 Hits, Last modified:
efinitions can be found using ''ip a'' \\ * IP address should also be able to be found using ''ip a''.\\... 92.168.1.0/24'' to find all the related active ip address ip range. </color>++ \\ <tab3>define <color red... .1</color><color blue> #definition of router IPv4 address</color>\\ <tab3>define <color red>modem_ip = 192... 5.2</color><color blue> #definition of modem IPv4 address</color> ++ | \\ + <color #202000/#F0F0E0>The $mo
DHCP / DNS Setup
35 Hits, Last modified:
d saying is the domain maintainer. For the e-mail address, we use a ; dot instead of an @. ; The lines aft... ...then an "A Record" for the domain server's IP address... A 192.168.1.12 ; This is the LAN address of the html server ; that is hairpi... eter ''168.192.in-addr-arpa'' matches the reverse address used in the SOA address used. The subsequent ori
NFTables IP Control
12 Hits, Last modified:
e addresses below 100 were assigned a specific IP address in the DHCP based upon MAC. I added a [[https:... hp/Sets#Named_sets|NFtables named set]] with ipV4 address and timeout function: <code> set controllist... be used where host DNS # resolves to IP address #tcp dport { http, https } ct state new ... Allow internal clients to correctly see external address "hairpin dnat" ip daddr $wan_ip4 tcp dpo
Debian / Ubuntu Network Setup
10 Hits, Last modified:
DHCP WAN (static? for PPPOE) # set up static ip address to access modem web page on WAN NIC iface eno1:0 inet static address 192.168.5.2/24 # Then LAN networks are eno2 e... 0 inet static bridge_ports eno2 eno3 eno4 address 192.168.1.1/24 dns-nameservers 192.168.1.14 1... x:xx:xx:xx The "modern" way to specify static ip address as address 192.168.1.0/24'' this automatically as
Router Miscellaneous
7 Hits, Last modified:
vate LANs (Local Area Network)s with NAT (Network Address Translation) used to connect the LANs to the WAN ... . This was required to compensate for the limited address space in IPv4. IPv4 NAT also provide some securit... public WAN. IPv6 does not use NAT as its native address space is sufficiently large never to require in t... sed commands and scripts:===== *Get external IP address ''wget http://ipinfo.io/ip -qO -'' *To check th
Linux Router Background
6 Hits, Last modified:
y. But the new ISP defaulted back to a dynamic IP address, so I needed to arrange a static IP address. After about a month of reliable operation I started getting p... me. So when my PPPoE connection was lost, the IP address could be assigned elsewhere and when my modem attempted to authenticate the IP address could not be assigned.... They fixed this quickly
ISP IPoE DHCP Setup Notes
3 Hits, Last modified:
Gigabit Network Connection HW Address: 0c:c4:7a:9f:36:4c (Super Micro Computer, Inc.) ... : 9216) QDisc: mq IPv6 Address Generation Mode: eui64 Queue Length (Tx... Port: tp Address: 192.168.5.2 202.
Router VM
3 Hits, Last modified:
oE. * There is also as separate static IP address setup to access and control the modem * A bri... owing features: * Firewall * NAT (Network Address Translation) * Port forwarding to basic servi... ote public access. * Rate limiting certain IP address ranges to public interface * Parental control
Basic Netfilter Function Block Diagram
2 Hits, Last modified:
diagram of the Netfilter Filter and NAT (Network Address Translation) functions, which are the basic requi... /2010/07/fail2ban-howto/|Fail2Ban Howto: Block IP Address Using Fail2ban and IPTables]] *[[https://www
ISP PPPoE Network Setup
2 Hits, Last modified:
for server name and unless your ISP assigns an IP address, leave this blank.</fs> Next a peer fille needs ... gfile #debug #noipdefault : Assumes that your IP address is allocated dynamically by the ISP. noipdefault
IPv6 Setup Notes
1 Hits, Last modified:
m/questions/55611/loopback-to-forwarded-public-ip-address-from-local-network-hairpin-nat *http://www.kloe