Search
You can find the results of your search below.
Fulltext results:
- NFTables Configuration @linux_router
- efinitions can be found using ''ip a'' \\ * IP address should also be able to be found using ''ip a''.\\... 92.168.1.0/24'' to find all the related active ip address ip range. </color>++ \\ <tab3>define <color red... .1</color><color blue> #definition of router IPv4 address</color>\\ <tab3>define <color red>modem_ip = 192... 5.2</color><color blue> #definition of modem IPv4 address</color> ++ | \\ + <color #202000/#F0F0E0>The $mo
- KPTree Torrent VM Setup @home_server
- ficant problems, save for BTGuard changing the IP address of their servers on occasion without informing en... omain ''.host''. * The PrivatVPN tunnel host IP address is different from the end IP address, unlike BTGuard which were the same. The host IP address must be used in the NFTables firewall to prevent
- DHCP / DNS Setup @linux_router
- d saying is the domain maintainer. For the e-mail address, we use a ; dot instead of an @. ; The lines aft... ...then an "A Record" for the domain server's IP address... A 192.168.1.12 ; This is the LAN address of the html server ; that is hairpi... ecords" so that e-mail for the domain's e-mail ; addresses goes to the right place. MX 00 mail.kptree
- Conky @home_server:home_server_setup:other_services
- -- --- Network --- # if_up_strictness = "address",-- Strictness of ${ifup} : up, link, or address -- -------------------- Conky's Displayed System Monit... m: ${nvidia memfreq} MHz ${if_up br0}${color0}MAC Address (br0): ${tab 90}$color${execi 99999 cat /sys/class/net/br0/address }${endif} #${if_up enp3s0}${color0}MAC Address (e
- KPTree - Email Server Setup @home_server
- the home server has only one external static IPv4 address the mail server subdomain needs to be shared on the common IP address with other subdomains and applications. We can us... between different subdomains. ===Set network IP address, static IP=== The mail server need to have a static IP address on the local area network. ++++I actually like to
- NFTables IP Control @linux_router
- home internet access. ====Disable Range of IP addresses, with count-down timer==== The DHCP assigned addresses in the range 100 - 254 were to be disabled (dropped) in the evening. The addresses below 100 were assigned a specific IP address in the DHCP based upon MAC. I added a [[https://wiki.nf
- Debian / Ubuntu Network Setup @linux_router
- DHCP WAN (static? for PPPOE) # set up static ip address to access modem web page on WAN NIC iface eno1:0 inet static address 192.168.5.2/24 # Then LAN networks are eno2 e... 0 inet static bridge_ports eno2 eno3 eno4 address 192.168.1.1/24 dns-nameservers 192.168.1.14 1... used there maybe a need to use this stanza. #hwaddress ether xx:xx:xx:xx:xx:xx The "modern" way to spec
- Network Setup @home_server:home_server_setup
- ess #The DHCP server is used to assign a fixed IP address based upon MAC auto br0 iface br0 inet dhcp ... d. I then setup the dhcp sever to assign a fix IP address to the eth0 address.++++ ++++Netplan Old Setup with 802.3ad bonding, too complex do not use| ====Full Net... tup the Bond auto bond0 iface bond0 inet manual hwaddress ether DE:AD:BE:EF:69:01 post-up ifenslave bond0 e
- IPv6 summary notes @tech_notes
- o.com/what-you-need-to-know-about-ipv6-link-local-addresses/|What You Need to Know about IPv6 Link-Local Addresses]] ====Address length and format==== The IPv6 address is 128 bits (i.e. 16 bytes) long and is written in 8 groups of 2 b
- SSH Notes @home_server:home_server_setup:other_services
- nfo.get_cpu_info()['brand_raw']}") print(f"Ip-Address: {socket.gethostbyname(socket.gethostname())}") print(f"Mac-Address: {':'.join(re.findall('..', '%012x' % uuid.getnod... .net_if_addrs() for interface_name, interface_addresses in if_addrs.items(): for address in interface_addresses: print(f"=== Interface: {int
- Docker mailserver @docker_notes
- leted to avoid orphaned rows. | |email |The email address of the mail account. | |password |The hashed pass... The last table contains forwardings from an email address to other email addresses. ^Field ^Purpose ^ |id |A unique number identifying each row. It is added by the... virtual_domains table again. | |source |The email address that the email was actually sent to. In case of c
- Docker nginx / php notes @docker_notes
- rs used to resolve names of upstream servers into addresses. # It's also needed when using tcpsocket and u... ; Define the anonymous ftp password (your email address). PHP's default setting ; for this is empty. ; ht... de ; the full path of the script, line number, To address and headers. ;mail.log = ; Log mail to syslog (Ev... processes have to map shared memory into the same address space. This ; directive allows to manually fix th
- dokuwiki setup notes @home_server
- needs to be setup to point to the appropriate ip addresses for wiki.kptree.net. The ipv4 points to a common public ipv4 address and uses proxies to redirect to correct VMs, so all subdomains have same public address. Each sub-domain can have an individual public ipv6 address if required and proxies are not required for ipv6
- Web Server setup @home_server
- *Test the web page by typing in the local ip address of the apache2 server in a web browser The [[htt... hines (VMs), each with a separate distinct LAN IP address. However there is only one WAN static Internet address, with the router setup to forward the web ports 80 ... rovide DNS information points to the WAN Internet address (A Record) for the domain name and all related su
- Router Miscellaneous @linux_router
- one]] ---- =====Reserved Ports and IPv4 Reserved Addresses===== It took me some time to track down this a... f.org/rfc/rfc3330.txt|RFC 3330]] Special-Use IPv4 Addresses, September 2002** IPv4 uses some of these special addresses for private LANs (Local Area Network)s with NAT (Network Address Translation) used to connect the LANs to the WAN