Search
You can find the results of your search below.
Fulltext results:
- Conky @home_server:home_server_setup:other_services
- could help you visualized the colors. ====Debian 11 Server Conky Configuration==== Conky uses a confi... following configuration on my main server (Debian 11) : ++++Debian Server conky setup; ~/.conkyrc| <co... e library (anti-aliased font) font = 'Arimo:size=11',-- Xft font to be used -- --- Network --- # ... s/class/net/enp3s0/address }${endif} #${if_up enp111s0}${color0}MAC Address (enp111s0): ${tab 90}$colo
- Docker mailserver @docker_notes
- changes are that instead of installing on Debian 11 virtual machine<sup>1</sup>, with a Maria mysql d... DockerFile]] *[[https://superuser.com/questions/1167696/install-whereis-command-on-alpine-linux|Inst... TABLE IF NOT EXISTS `virtual_domains` ( `id` int(11) NOT NULL auto_increment, `name` varchar(50) NOT... E TABLE IF NOT EXISTS `virtual_users` ( `id` int(11) NOT NULL auto_increment, `domain_id` int(11) NO
- IPMI Console Setup @home_server:home_server_setup:other_services
- : 1000 Volatile Bit Rate (kbps) : 115.2 Non-Volatile Bit Rate (kbps) : 115.2 Payload Channel : 1 (0x01) Payload Port ... "" GRUB_CMDLINE_LINUX="console=tty1 console=ttyS1,115200n8" # Uncomment to enable BadRAM filtering, m... RMINAL=serial GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=1 --word=8 --parity=no --stop=1" # Th
- Docker @docker_notes
- at iptables operates on/as nftables in the Debian 11. As per[[https://docs.docker.com/network/iptable... /resolv.conf'') is assigned to a proxy on 127.0.0.11:53. //(Note that DNS uses UDP not TCP datagrams.... er netfilter use NAT chains to operate on 127.0.0.11. See the following nftables info: ++++nft list t... CKER_OUTPUT { meta l4proto tcp ip daddr 127.0.0.11 xt match "tcp" counter packets 0 bytes 0 xt targe
- ASCII @tech_notes
- = ^Four Column ASCII ^^^^^ ^ ^00 ^01 ^10 ^11 ^ |00000 |NUL |Spc |@ |` | |00001 |SOH |! |A |a | |00010 |STX |" |B |b | |00011 |ETX |# |C |c | |00100 |EOT |$ |D |d | |00101 |ENQ |% |E |e | |00110 |ACK |& |F |f | |00111 |BEL |' |G |g | |01000 |BS |( |H |h | |01001 |TAB |) |I |i | |01010 |LF |* |J
- Router Miscellaneous @linux_router
- .crowncloud.net/?How_to_install_Glances_on_Debian_11|How to Install Glances System Monitor on Debian 11]] * [[https://www.linuxcapable.com/how-to-install-glances-system-monitor-on-debian-11/|How to Install Glances on Debian 11]] * [[https://www.linuxcapable.com/how-to-install-glances-on-d
- NFTables Configuration @linux_router
- ress</color>\\ <tab3>define <color red>wan_ip4 = 112.213.222.38</color><color blue> #definition of wa... color>\\ <tab6><color blue> # openvpn is port 1194 on both TCP and UDP, but we will not be using t... mail server uses starttls on port 143) * pop3 {110} / pop3s {995} - who still uses pop3? ''nft'' tr... erverfault [[https://serverfault.com/questions/55611/loopback-to-forwarded-public-ip-address-from-loca
- IPMI CLI Tools @home_server:home_server_setup:other_services
- status 2>/dev/null) if [ ${?} -ne 0 ] then exit 11 #error 11 means that the impitool power status return an error #ipmitool communication to remote ... status 2>/dev/null) if [ ${?} -ne 0 ] then exit 11 #error 11 means that the impitool power status return an error #ipmitool communication to remote
- ansible @tech_notes
- n-debian-linux/|Install and Use Ansible on Debian 11/10]] *[[https://ostechnix.com/install-and-confi... io/how-to-install-and-configure-ansible-on-debian-11/|How to install and Configure Ansible on Debian 11]] *[[https://simeononsecurity.com/guides/automat... ls/how-to-install-and-configure-ansible-on-debian-11|How To Install and Configure Ansible on Debian 11
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- nger includes it in its repositories as of Debian 11 due to poor maintenance..... So I have no moved ... 0% /sys/fs/cgroup mergerfs fuse.mergerfs 11T 177M 11T 1% /srv/storage /dev/sdb1 ext4 5.5T 89M 5.2T 1% /media/Disk2 /dev/... roposed mount point if [ -z "$1" ] then exit 11 #no mount point input, exit with error else m
- DHCP / DNS Setup @linux_router
- vices was totally lost when upgrading from Debian 11 to Debian 12, circa June 2023. So I had to rebuil... debian/|Configure BIND Slave DNS Server on Debian 11]] *[[https://www.lisenet.com/2018/configure-dhc... debian/|Configure BIND Slave DNS Server on Debian 11 | Debian 10]] *[[https://www.zytrax.com/books/d... A 192.168.1.10 cloud A 192.168.1.11 www A 192.168.1.12 ; www is directed
- KVM Setup @home_server:home_server_setup
- n-debian/|How To Install KVM Hypervisor on Debian 11|10]] *[[https://www.cyberciti.biz/faq/install-k... default to Debian testing and can boot to Windows 11 when I need to use Windows based software. My so... w2 -c image.qcow2_backup image.qcow2'' Example: A 11GB disk file I shrank without compression basically remained unchanged at 11GB, but with compression to 5.2GB. Time to compres
- Manjaro Setup Notes @home_server:home_server_setup:other_services
- ibrary (anti-aliased font) xftfont Monospace:size=11:weight=bold # Xft font to be used # --------... 10}% ${color5}${cpubar cpu10}$color ${color0}Core 11:$color ${freq 11} MHz ${cpu cpu11}% ${color5}${cpubar cpu11}$color ${color0}Core 12:$color ${freq 12}... old -w100}$color$font ${color4}${font Arial:size=11}${execi 30 journalctl -n 6 | fold -w70}$color$fon
- Docker nginx / php notes @docker_notes
- dules. #resolver 1.1.1.1 1.0.0.1 2606:4700:4700::1111 2606:4700:4700::1001; # Don't tell nginx version to the clients. Default is 'on'. server_tokens ... :9000 ; Set listen(2) backlog. ; Default Value: 511 (-1 on Linux, FreeBSD and OpenBSD) ;listen.backlog = 511 ; Set permissions for unix socket, if one is use
- KPTree Torrent VM Setup @home_server
- > client dev tun proto udp remote vpn.btguard.com 1194 resolv-retry infinite nobind persist-key persis... e lan = ens3 define tun = tun0 define wan_ip4 = 112.213.222.38 # Clean out the current ruleset fl... /24 counter accept oifname $lan daddr 95.211.0.0/16 counter accept oifname $lan dadd... .0/24 -j ACCEPT iptables -A OUTPUT -o eth0 -d 95.211.0.0/16 -j ACCEPT iptables -A OUTPUT -o eth0 -d 85