Search
You can find the results of your search below.
Matching pagenames:
- Linux Router Background
- DHCP / DNS Setup
- Router Hardware
- ISP IPoE DHCP Setup Notes
- IPTables Configuration
- IPv6 Setup Notes
- Router Miscellaneous
- Basic Netfilter Function Block Diagram
- Debian Server Network Setup
- NFTables Configuration
- NFTables IP Control
- ISP PPPoE Network Setup
- Router VM
- Linux Router Setup Notes - Index
- TC - Traffic Control
- Router Configuration, Switch & Server Setup
- Wifi Router / Access Points
- Wireguard VPN access from WAN to LAN
Fulltext results:
- Wireguard VPN access from WAN to LAN @linux_router
- {{tag>linux router vpn wireguard Docker "qr code" QR}} =====Wireguard VPN access from WAN to LAN====== <fc... tup==== I want to setup an access within my Linux router to allow external authorise only VPN access into ... ftables and do not in general seem well setup for router access, also some belabour use of variable IP add... re not setup to utilise a full manual setup Linux router, using OPNsense, pfsense, OpenWRT or consumer mod
- Router Miscellaneous @linux_router
- {{tag>linux router monitor links darkstat glances ntopng iftop nethogs}} ======Router Miscellaneous====== ======Monitoring====== There... ion as good or better than expected in a packaged router. Another reference: [[https://www.ctrl.blog/entry... December 2023. I ran in a Docker container on my Router, although markedly improved since trying a few ye
- NFTables Configuration @linux_router
- {{tag>linux router NFtables firewall}} =====NFTables Configuration===== The best reference for nftables is... thub.com/wolfhechel/db7ed3be31feb104752e|nftables router]]. The reference at stosb is good, but not for a router [[https://stosb.com/blog/explaining-my-configs-nf... lot of experimenting the following is my NFTables router configuration file. Create the following file cal
- DHCP / DNS Setup @linux_router
- {{tag>linux router dns dhcp bind ip ipv6 radvd host dig nslookup}} ======DHCP / DNS Setup====== =====Outd... orked reliably well, when ever I shutdown the the router with DNS/DHCP servers my LAN would stop working. ... archive (tl;dr; roll-up) eventually. Actually my router that I was running these services was totally los... nger readily available, Kill-9 Ubuntu 16.04 based Router, Part 2 - DHCP| does not seem to be saved on [[ht
- Debian Server Network Setup @linux_router
- {{tag>linux Debian Ubuntu router network netplan interface vlan ipv6 ip}} ======Debian Server Network Setu... he units 4 main port will be setup to look like a router with 1 WAN port and 3 LAN port. The WAN port will... age access. As the modem is using 192.168.5.1 the router would assign the next address, 192.168.5.2. **To access the router modem webpage the router firewall must also be ap
- Linux Router Background @linux_router
- {{tag>linux router 4G LTE mobile}} =====Linux Router Background===== I have had the router hardware for about 7 years now, as of June 2023. It took me nearly 18 months to set up as primary home router on bare metal, with DNS and DHCP. I got Wireguard
- Linux Router Setup Notes - Index @linux_router
- ======Linux Router Setup Notes - Index====== <pagelist> *[[linux_router:start]] *[[linux_router:background]] *[[linux_router:hardware]] *[[linux_router:ubuntu]] *[[linux_router:network]] *[[linux_route
- Router Hardware @linux_router
- {{tag>linux router hardware}} ======Router Hardware====== =====ikoolcore-r2-max===== (Dec 2024) The Supermicro SYS-E200-9B ... html| i3-305 CPU]] that should easily handle home router services up to 10GB/s, and certainly to 2.5GB/s. ... koolcore.com|wiki.ikoolcore.com]]. ++++ =====Old Router Hardware===== ++++old hardware tldr;| With the X1
- sidebar
- -notes]] *[[docker_notes:misc]] ++++ ++++Linux Router Setup| *[[linux_router:start]] *[[linux_router:background]] *[[linux_router:hardware]] *[[linux_router:ubuntu]] *[[linux_router:network]] *[[lin
- Router Configuration, Switch & Server Setup @linux_router
- {{tag>linux router "router configuration" setup debian ubuntu snap snaps switch network}} ======Router Configuration, Switch & Server Setup====== =====Router Configuration===== <fc #ff0000>[DRAFT]</fc> A rou
- Wifi Router / Access Points @linux_router
- {{tag>linux router wifi "wifi router" "access point"}} ======Wifi Router / Access Points====== I prefer to run higher quality wifi access poin... P) than the all in one type routers. My current router is X86 based running Linux Nftables on bare metal
- Router VM @linux_router
- {{tag>linux router VM}} ======Router VM====== I have just decided to play with installing VM (virtual machines) on my Router hardware (2023-01). I have been reluctant to do ... mber of reasons. My separate listing for [[linux_router:hardware]]. Basically the machine is a bit old s
- Docker - DHCP Kea Server @docker_notes
- automatic fall over back up on my separate Linux router. I basically followed the Kea template [[https:/... gadgets/2016/04/the-ars-guide-to-building-a-linux-router-from-scratch/|The Ars guide to building a Linux router from scratch]]. It looks like he updated this [[ht... etsEncrypt]]. In my earlier implementation of my router [[https://wiki.kptree.net/doku.php?id=linux_route
- Docker Host @docker_notes
- r functionality. I use nftables as my main edge router / firewall on bare metal. I could probably run this on a VM within Proxmox, but the Router hardware is not especially powerful and at this t... g reason for me to do so at this time. As my old router became too unreliable to use circa November 2024, I have ordered a replacement. ++My old router tl;dr|My previous router basic failed to operated
- ISP PPPoE Network Setup @linux_router
- {{tag>linux router pppoe pppoed ISP mtu dns dhcp}} =====ISP PPPoE Network Setup===== A reasonably compreh... showthread.php?t=2341699|Setup Ubuntu Server as a router using a PPPoE connection]], [[https://samuel.kado... tps://scarff.id.au/blog/2019/nbn-hfc-with-a-linux-router/|Connecting to NBN HFC with a linux router] Internode router set up notes]] * [[https://scarff.id.au/bl