Search
You can find the results of your search below.
Fulltext results:
- KVM Setup
- tem -o this-vm -n that-vm %%--%%auto-clone''. To list all defined virtual machines ''virsh list %%--%%all''. Which will make a copy of this-vm, named that-v... ks on VMs that are shut down</fc> -''sudo virsh list --all'' to list all KVM virtual machines. -''%%sudo virsh dumpxml VM_name | grep -i "source file"%%''
- BASH Customisation @home_server:home_server_setup:other_services
- show index number of each file * ''-R'' : list sub-directories recursively * ''-S'' : sor... e:| <code bash> # This is my current / up-to-date list of bash aliases. # This is the exact same file th... rowdsec cscli' alias csdecisions='cscli decisions list' alias csalerts='cscli alerts list' alias csinspect='cscli alerts inspect -d' alias cshubs='cscli hub l
- IPMI CLI Tools @home_server:home_server_setup:other_services
- ''ipmitool -h'' * Chassis power commands: * List current power status: ''ipmitool -I lanplus -H 19... 8.1.42 -U baumkp -a chassis power status'' * List available chassis commands:''sudo ipmitool -I open chassis'' * List chassis policy options ''ipmitool -I lanplus -H 1... lanplus -H 192.168.1.42 -U baumkp chassis policy list'' * List all current chassis info: ''ipmitool
- Rsync @home_server:home_server_setup:other_services
- o access hosts allow = 192.168.1.5 hosts deny = * list = true uid = root gid = root read only = false # ... mply type ''rsync'' at terminal to see a complete list ^Flag Short^ Flag Long ^Description^ |''-z''| ''%... ould also create a file that contains the exclude list ''tmp'' and ''src''. This would look like: <code>sudo rsync -azv --exclude-from 'exclude-list.txt' pi@RedRPi:/home/pi/ /mnt/backup/rsync-test6<
- Commonly used commands and scripts @home_server:home_server_setup:other_services
- status) (enable / disable for boot control) *List current Systemd operating units: ''sudo systemctl list-units | grep %%'*'%%''. Change or remove the grep... ll package'' to install a package *''%%sudo apt list --installed%%'' to list installed packages, use grep to filter, eg.: ''%%sudo apt list --installed | gr
- Linux Block Device Notes @home_server:home_server_setup:other_services
- ic tools==== *''ls -l /dev/disk/by-uuid/'' will list the disks with UUIDs *''lsblk'' to list partitions (or list block devices) *''lsblk -f'' or ''blkid'' to list the UUIDs *''sudo blkid'' will list data blocks
- Network Setup
- works can be listed with the command: ''virsh net-list --all'' You can list networks with ''networkctl list'' =====Some helpful commands and comments:===== *To see bridge statu... tup status: ''cat /proc/net/bonding/bond0'' *To list network configuration: ''ifconfig'', ''ip a'', ''
- Home Server Index @home_server:home_server_setup:other_services
- ===Home Server Index=== <pagelist&header> *[[home_server:home_server_setup:summary]] *[[home_server:home... [home_server:home_server_setup:disk_check]] </pagelist> ===Home Server Other Index=== <pagelist&header> *[[home_server:home_server_setup:other_services:ind... ver:home_server_setup:other_services:misc]] </pagelist> some CLI tools: * homebrew actual runs on Li
- NFS @home_server:home_server_setup:other_services
- equired <code> # /etc/exports: the access control list for filesystems which may be exported /export ... mount Check status of clients: *''findmnt'' to list file system in tree format or ''findmnt -l'' in flat list. To allow automatic boot of nfs clients: ''sudo
- systemd Stuff @home_server:home_server_setup:other_services
- -1'' to see last boot entries. *''journalctl --list-boots'' to list all available journaled boots. *''sudo journalctl -u pppoe'', use u flag to see speci... rint basic time date only on cli\\ ''timedatectl list-timezones'' to set available time zones\\ ''sudo
- My Home IT Setup
- be sure, to be sure. ++++Home Server Index|<pagelist&header> *[[home_server:home_server_setup:summary]... er:home_server_setup:other_services:index]] </pagelist>++++ <- home_server:home_server_setup:summary|Pr
- Home Server Notes
- Configure KVM on Ubuntu 18.04 LTS Server]]. <pagelist&header> *[[home_server:home_server_setup:summary]... er:home_server_setup:other_services:index]] </pagelist> ---- =====Supermicro Computers with BMC and IPM
- VNC Server
- abab. (CLI: boabab &) ++++Home Server Index|<pagelist&header> *[[home_server:home_server_setup:summary]... er:home_server_setup:other_services:index]] </pagelist>++++ <- home_server:home_server_setup:kvm|Prev ^
- Back-up Server Old Setup @home_server:home_server_setup:other_services
- access hosts allow = 192.168.1.10 #hosts deny = * list = true uid = root gid = root read only = false #a
- SWAP Files @home_server:home_server_setup:other_services
- the reliability of his drive. The following is a list of method to check and disable SWAP function. *