Search

You can find the results of your search below.

Fulltext results:

NFTables Configuration
3 Hits, Last modified:
h all the table chain is at the end drop (nftable default policy is accept, hence it is necessary to set so... h all the table chain is at the end drop (nftable default policy is accept, hence it is necessary to set so... number (line numbers) *''-n'' : shows names (default), e.g. dport ssh *''-nn'' : shows numbers e.
ISP PPPoE Network Setup
8 Hits, Last modified:
se parameters ''man pppd''. <code> # Minimalistic default options file for DSL/PPPoE connections # man:pppd... +G /etc/syslog to see end of logfile #debug #noipdefault : Assumes that your IP address is allocated dynamically by the ISP. noipdefault # Use this connection as the default route. defaultroute replacedefaultroute #password is not placed in
DHCP / DNS Setup
18 Hits, Last modified:
, "less /etc/bind/named.conf". This can remain as default as below. However the configuration files noted t... to be set up. We will copy the existing files to default: *''sudo cp /etc/bind/named.conf.options /etc/bind/default.named.conf.options'' *''sudo cp /etc/bind/named.conf.local /etc/bind/default.named.conf.local'' *''sudo cp /etc/bind/named.c
TC - Traffic Control
2 Hits, Last modified:
*''sudo sysctl -a | grep qdisc'' shows current default settings *''sudo sysctl -a | grep net.'' shows ... erface ''dev eno1'' it would seem that Linux has default settings for network interfaces, e.g.: <code>qdis
Linux Router Background
1 Hits, Last modified:
he new ISP it worked immediately. But the new ISP defaulted back to a dynamic IP address, so I needed to ar
Router Hardware
13 Hits, Last modified:
grated graphics device (IGD), which is enabled by default. The graphics then defaults to the BMC adaptor. The IGD can be turned of from the BIOS motherboard options... el IGD Configuration). The terminal also seems to default to 1024x768 resolution, so no additional work is ... s on the BMC video controller. The Ubuntu drivers defaulted to this basic BMC graphics display system. (Thi
Router Miscellaneous
8 Hits, Last modified:
er version. The Docker package documentation and defaults are to the ''latest'', yet the available package... ====Docker Host Security==== Docker currently by default use iptables on the host machine to allow access to images. Unfortunately the default iptables effectively fully opens up docker on the... of a personal IPSEC VPN. It uses the most secure defaults available, works with common cloud providers, an
Debian / Ubuntu Network Setup
9 Hits, Last modified:
up===== As of Debian 10 (Buster) Debian still by default uses this interface Setup. It can be setup to us... e netplan inface.\\ Ubuntu (as of version 14.04) defaults to [[https://www.freedesktop.org/wiki/Software/s... tocol #bridge_fd 9 # forwarding delay # use default? #bridge_hello 5 # use default? #bridge_maxage 60 # use default? </code> ++++ The following is a
ISP IPoE DHCP Setup Notes
4 Hits, Last modified:
password and user name. It actually seems to use default username and password in the pppoe software that ... R_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd... AST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 0c:c4:7a:9f:36:4c brd ff... Link File: /usr/lib/systemd/network/99-default.link Network File: /run/systemd
IPTables Configuration
2 Hits, Last modified:
such as Docker and Fail2ban basically still have default enbedment of IPTables with use of NFTables requir... ands=== *''iptable -L'' , lists the tables, by default the filter table. To list the nat table, add ''-t