Search
You can find the results of your search below.
Fulltext results:
- NFTables Configuration
- ag>linux router NFtables firewall}} =====NFTables Configuration===== The best reference for nftables is at the de... experimenting the following is my NFTables router configuration file. Create the following file called: "router.n... d with ''sudo iptables -F''. ====Sample NFTables configuration==== ''sudo vim /etc/nftables.conf'' ++++ Router ... v4 and IPv6 internet protocols. I wanted a shared configuration between both so I chose this one, alternatively I
- ISP PPPoE Network Setup
- hcp-server'' ====Set up PPPoE==== "chap-secrets" configuration Edit the chap-secrets file, ''sudo vim /etc/ppp/... r 2 DNS server addresses usepeerdns </code> These configuration files should allow a PPPoE connection to the ISP,... ing at system startup. We will enable later, once configuration is more complete. To check log files use: ''sudo
- Router Configuration & Server Setup
- {{tag>linux router "router configuration" setup debian ubuntu snap snaps}} ======Router Configuration & Server Setup====== =====Router Configuration===== <fc #ff0000>[DRAFT]</fc> A router performs the following ke... the update failed. I then managed to corrupt the configuration files on the router..... Hopefully these notes ex
- DHCP / DNS Setup
- udo apt install bind9" Next check the named.conf configuration file, "less /etc/bind/named.conf". This can remain as default as below. However the configuration files noted there in will need to be set up. We w... ind9 instance, e.g. ''rndc reload'' to reload the configuration ====Setting Bind9 to IPv4 Mode==== ''sudo vim /et... ts of /etc/bind/named.conf // This is the primary configuration file for the BIND DNS server named. // // Please
- Router VM
- on this machine are, all bare metal: * Network configuration (of 4 x 1 GB/s ethernet ports) * Access to pu... the hypervisors *''libvirt-daemon-system'' - configuration files to run the libvirt daemon as a system servi
- IPv6 Setup Notes
- *http://sophiedogg.com/radvd-and-dhcpd6-server-configuration-for-dynamic-dns/ *https://superuser.com/questio... *http://sophiedogg.com/radvd-and-dhcpd6-server-configuration-for-dynamic-dns/ Commands: *''modprobe ipv6'' ... nt ipv6 show neigh'' *Standard systemd nftables configuration file location: ''sudo vim /etc/nftables.conf''
- Linux Router Background
- My ISP sold their business on and when I tried my configuration with the new ISP it worked immediately. But the n... roblem went away. *Access to the modem / router configuration is very difficult when my family members also wis... good environment to be testing new equipment and configurations. (Production versus development environment. I ... ability to get time and motivation to perform the configuration and testing and finally the documentation. I did
- Router Hardware
- e on a VM as I do not like the amount of IPtables configuration it does on its host. This would interfere with my NFTables router firewall configuration, if on the same host. I looked at the various op... the unit can be remotely off-site operated, with configuration options for auto on at power up and heart-beat wi... oard options (In this case under Advanced-Chipset Configuration-North Bridge-Intel IGD Configuration). The termin
- Router Miscellaneous
- [[https://forums.docker.com/t/docker-and-iptables-configuration-startup/904|Docker and iptables configuration @startup]] [[https://fralef.me/docker-and-iptables.html|Docker an... ap Protocol was a precursor to DHCP (Dynamic Host Configuration Protocol) **[[https://www.ietf.org/rfc/rfc3330.... -qO -'' *To check the current network hardware configuration ''ip a'' *Systemd common commands (start / stop