I have Windows on my main desk top machine, it is dual boot with Debian/XFCE. I am using Debian almost exclusivly now. The BIOS based dual boot works well, I have it defaulting to Debian. I do not currently have a Windows VM setup on my main server. My 3 sons also have computers with Windows on them. Lastly, I am required to used company Windows machines at work. Hence I like to keep a list of my preferred Windows software reasonable up to date.
I have been using Microsoft products for quite some time, starting with MSDos then Windows 3.0, 3.1, 95, 98, XP, 7, 8, 8.1 and finally 10. (I managed to skip some of the duds, such as ME, 2000 and Vista, although I did occasionally use them on friends, family and work machines. Contrary to all the noise I never had any problems with version 8 & 8.1. I thought ME was bad and Vista too, but as noted basically managed to avoid them in the most part.)
So below is a list of Windows software often use.
I do not use Windows much at home anymore. I have highlighted the software I still use with a (!), and software I use on my Linux desktop L
Notes on licensed software:
I am not overly pious about free versus purchased software. I appreciate people should be rewarded for their efforts. One has to have the upmost respect for those providing “free” software (true free, e.g. GNU free, NOT Facebook or Google free) . Sadly in general paid software providers merit less respect.
I suppose the problem is the middle man, usually representing wealthy entitled people that use wealth and power to further their power and wealth.
I have the following 2 personal examples that highlight why I do not like paid licensed software.
A very big problem with paid licenses is the common absurd software licenses that go with them. They are a disgrace. Generally they enormously limit the paying end users rights. They are also so long who would bother reading them anyway. Ultimately, if one has paid to use the software one should have the right to use, otherwise why pay.
I had for many years a license for Autodesk AutoCAD Light. This was not cheap software costing on average a few hundred dollar per year for the right to use. My personal use was very limited, but I wanted access to this software. I did use this software at work too, I could guarantee I was the only person using this license at any one time. Autodesk charges different prices for their product in different countries, there are some valid reasons for this, but the main reason is to do with maximizing profit, in wealthier countries they can simply get away with charging more, in poor countries generally less. Also there are marketing reasons in populous countries they may charge lower pricing to increase market penetration and make more sales, hence overall more profit. Sadly I come from a relatively wealthy country with a relatively small population, read higher pricing! The argument from the seller is that is cost more to sell in my country, however being English speaking I would be quite happy to use the USA version of the software at the USA price! Basically many USA aspects are forced down our throat anyway, e.g. date format.
In any case I was assigned to work in China for about a year. About 3-4 months working in China I had a call from the company software department to ask if I was using AutoCAD Light software. I said yes, but with paid for license. Nevertheless they asked that I remove the software from the company computer, to which I immediately acquiesced. Upon reading the license for the produce I found I only had the right to use the software in another country for 90 days after which I was expected to purchase a local version there! Like I was expected to purchase a Chinese license of the software. This was totally unacceptable and really is an example of gross license conditions failure.
I still use Autodesk products at Work using the license provided from work. These are often corporate based network licenses that only work if connected to the network. There is a method to fix a license to a machine, if required.
xplorer2 is a nice Windows Explorer replacement with many extra features. I used for a number of years, but again the licensing requirement just became more than they were worth for me.
I purchased a copy for personal home use and another copy for work use. The license is tied to a particular computer on to which the software is installed and authorised for use. I have a number of computers at home, and generally only one at work. It was basically required that I have a license for every computer at home, I could not justify the expense and inconvenience associated with swapping active license on machines at home. I asked to install the license on more than one machine and the response was basically one license one machine!
Basically the built in version of Explorer in Windows meets 95+% of my daily needs.
An additional problem with using xplorer2 was that I got use to using it and when I went back to standard explorer it was uncomfortable to use. As this software is basically on every Windows machine this happened often. So I have simply stopped using xplorer2 at work and at home, it is simply not worth the trouble, particularly with the restrictive license requirements.
Ultimately the software owner has the right to limit their software to 1 machine per license, however I have the similar right to decided this means the software it too expensive and inconvenient for me to justify to use. For this type of software I want a license that gives me unfettered home use on at least 2 machines and perhaps all home personal use machines, with a separate license for work use.
Sadly there is no full featured GNU Licensed Linux PDF writer. Further to this most paid versions, including Foxit Pro do not work on Linux. Interestingly the Free version of Foxit does have a Linux version. Hence I purchase a copy of Qoppa Software's PDF Studio PRO that does run of Linux and Windows. I may end up buying another license of Qoppa for my work machine in the future if happy with it, instead of Foxit Pro.
I was quite happy with Foxit Pro on Windows, but if they can not provide a Linux version… Also Foxit originally allowed 2 installations per license and now seem to be going back to 1 machine one “Single-Use” license, which is a problem for me. Qoppa states“…can be used on 2 machines of any OS.”
Licensed software is often full of terms that are arguably bigoted, however this is usually simply a goal to maximize profit. Sadly some GNU software providers seem to provide limits on their software use based upon their biases.
iTunes is software I do not particularly like. First of all I do not use the Music feature having long ago rip my CD collection to MP3 and I simply do not like the way iTunes works. So the only real reason to use iTunes is for my iOS devices, backing up iOS devices etc. iTunes, in typical Apple fashion I find is not smart end user friendly as it has been designed for not smart users and attempts to hide the lower level file system. Further to this the configuration, backups and apps end up being very large amounts of files (multiple 1000s) and using huge amounts of disk space, in some cases well over 200GB!. So to help alleviate the excessive file system use on my primary Windows10 SSD I would like to move to my Linux NAS. The following are the steps to achieve this.
I really now only use this software to backup and restore Apple devices…. The app functionality has been removed by Apple, which is good as I was wasting too much of my time….. Otherwise iTune is and always has been crap ware…..particularly on MSWindows machine.
C:\Users\doej\Music\iTunes to \\NASname\various_path\iTunesC:\Users\doej\Music\iTunes to C:\Users\doej\Music\iTunes_old, or simply delete.mklink /D 'C:\Users\doej\Music\iTunes' \\NASname\various_path\iTunes. The command should state symbolic link created as given in original command.C:\Users\baumk\AppData\Roaming\Apple Computer\MobileSync\Backup.iTunes is a pretty flakey program and Apple does play the propriety with the Lightning cable, so the problem could be any of the following:
However one good trick is to simply run the install file “C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl64.inf”. The easiest way being to right click the file in exploer and select the install option.
With the problems on the old printer noted below I decided to replace the printer scanner. After 4 year of use it looks like I made the correct decision to go with the lower priced larger A3 printer with disposable ink cartridges.
Printing photos at home is very expensive. The photo paper and original ink are just too expensive (rip off). It is cheaper to setup the photos and get their files printed at the likes of Kmart. These photo printing services even have on-line services or take a USB drive to the store terminal. The photos get mailed to you. Old printer stuff
In windows both the link and drive substitution commands have their own nuances….. The main problem with “subst” is that the reference is not canonical. The mklink seems to sometimes fall back to the full path.
There are two main reasons to use:
In Linux symlinks seem to be more robust (mind you just about everything seems more robust…) Symlinks to files are used as a control mechanism. Hard links are frequently used as a backup technique to minimise real backup space used.
For some reason Windows 10 will not show my network drives in the Explorer Network directory. Even when it did work it was slow to show the network drives. I can simply type in the network drive into the path, e.g. “\\User1NetworkDrive”, but this is a bit clumsy and is not always an option in some file modal windows. A symlink is the best overall solution.
Open up a Command Prompt (Admin) - right click the windows icon or type “Win + X”. In Windows 10 you can also type in Command into the Cortina search area and right click on the Command Prompt item.
For files the command syntax is: “mklink Link Target”.
I am only really interested in a directory link the syntax is: “mklink /D Link Target”, example: “mklink /D C:\Users\User1\User1NetworkDrive \\User1NetworkDrive”.
This is the command syntax to associate a path with a drive letter:
SUBST [drive1: [drive2:]path] SUBST drive1: /D Parameters drive1: – Specify a virtual drive to which to assign a path. [drive2:]path – Specify a physical drive and path to assign to a virtual drive. /D – Delete a substituted (virtual) drive. Using the SUBST command with no parameters will display a list of current virtual drives.
The GUI option in Windows is to right click the network icon in file explorer. Then select the option map network drive. A similar option to Disconnect network drive exists.
There is an “opposite” to the “subst” command called “join” that makes hardward devices appear as directories.
All too often the keyboard mapping seems to get set to the United Kingdom, which messes up a few of the Keys when using a US keyboard. I suspect this is a problem with selecting Australian as the primary English langage that seems to sometime also select the UK keyboard. In any case in Windows 10 the solution is as follows.
The simple solution is to remove the UK language setting and if necessary add the US one. The Australian can remain. Further to this the keyboard layout can be independantly set. The language can be adjusted in the “ region and language setting”, use Cortana if necessary to find. Click on the language and add the US QWERTY if necessary. Delete the UK QWERTY keyboard layout.
I have had problems with windows appearing off the screen partially or fully many times over the years, particularly when using multiple monitors.
I found an article on CNet, but will not link to it, as CNet is a real garbage filled site. In any case the simple solutions are listed below:
Right-click on the taskbar and click Cascade windows. This will reset all open window positions and cascade them from the top left screen point. Unfortunately, many media players will not reposition in this manner, and it forces ALL of your windows to reposition – even the ones that were behaving themselves.
Right click on the task bar icon for the specific program and select move. Use the mouse or keyboard direction arrows to move the window selected.
Right click on the task bar icon for the specific program and select Maximise. The window will maximise to the full screen area. When minimised its position will return to previous off screen.
For Windows 10 you need to move over the task bar program until the small program window appears, this also bring to foreground the main window too. Then right click on the small program window to get the move and maximise options.
When pasting text from other applications on occassions Excel places all the columns into one column. To adjust into multiple columns the following feature can be used. Menu: Data : Text to Columns
The menu : Data : Get Data : From File : From Folder presents a dialogue to input a windows directory. Once the directory is shown the load button will place it into a new sheet
=CELL(“filename”,A1)
The cell function returns information about the cell contents.
This is performed in MSWindows Powershell using command: dir -Recurse -Directory | Select FullName | Export-Csv “list.csv”
After this I want to list the level of the directory, to do this I count the number of “\” in cell B3: =LEN(B3)-LEN(SUBSTITUTE(B3,“\”,“”))
Earlier in my engineering career I used Lotus123 and MSExcel with iteration to calculate the friction factor of piping with Newtonian fluid according to the Darcy friction factor formulae. To remove the iteration from the spreadsheet I wrote a simple VB script that took care of this. When I get the change I will copy the script here.
VSBasic code for Colebrook Equation
As can be seen in the wiki page, Darcy friction factor formulae, there are reasonably accurate equations that approximate the Colebrook equation that are available that do not require iterations to solve. I believe the VBscript is simpler and not an approximation…..
MSExcel unnecessarily and annoyingly changes conditional formatting ranges.
The options menu, advanced options, Editing options, unselect Extend data range formats and formulas reputedly stops this behavior. Unfortunately, it also stops the automatic copying of formula when inserting new rows or adding new lines to the bottom of an existing list.
References:
{ TOC \o “1-2” \h \z \f }{ TC “Appendix A - Content/Name” \l 1 \n }Replace File menu commands:
Sometime a program seems to get stuck when starting. This could be the add-in or other problems. A possible solution is to start the program in safe mode.
Some other possible options to check:
The Intel built in graphics accelerator seems to have problems with proper full screen resolution on 4K monitors. A solution to rectify this is to turn off the hardware acceleration within the AutoCAD product, see How to enable or disable hardware acceleration in AutoCAD. The hardware configuration option can be found using the following commands: graphicsconfig, 3Dconfig, options.
If inserting block does not seem to scale or show up check the annotative option on the block properties. The option can only be changed in block edit.
Attaching a picture effectively externally references the picture. Unlike a drawing xref these ole object do not seem to be able to be bound (embedded) to the drawing. This is subject to links path breakage, particularly on multiuser system. Where the image is in the same directory the path can be specified as “./image.file”. Use the PASTESPEC command and paste in as a picture file. This embeds into drawing file, not as a link.
viewport to create new viewportgrid off to turn off gridForm versus function, unfortunately the moronic types seem to favour form over function. Contrast of text is particularly im